OBaby Apollo Instruction Manual - page 4

Other manuals for Apollo: Instruction Manual

Page of 7

Download

Bookmark us

Fitting and Removing the Front Wheels

fig. 13

fig. 14

fig. 15

Using the Front Swivel Wheels

To put the wheels in swivel mode, lift the lever on the front of each front wheel

(fig.16 & 17).

To lock the swivel wheels, first ensure the front wheels are facing forward inline with the

chassis, then push the lever down (fig.18).

fig. 16

fig. 17

fig. 18

Adjusting the Backrest

Applying the Brakes

fig. 19

fig. 20

Lock

Release

To fit the front wheels, push the wheels onto the front legs until they click into place.

To Remove, squeeze both clips on the leg, whilst pulling the wheel off the leg.

To lock the brakes fully, push down on each brake lever using your foot (fig.19).

To release the brakes, lift each brake lever using your foot (fig.20).

Apply the brake before putting your child into the pushchair.

Apply the brake when the pushchair is stationary.

To recline the backrest, press the button on the toggle and pull away from the seat to the

desired height (fig.21). Lower the seat to rest on the toggle (fig.22).

To put upright, grip the sides of the toggle with one hand, and the strap with the other

hand and slide the toggle up the strap to the desired height (fig.23).

fig. 21

fig. 22

fig. 23

Press

www.obaby.co.uk