™ chase 4 wheeler pramette instruction manual important please read these instructions carefully before using this product keep for future reference.
Safety warnings getting to know your pramette hood harness pads front swivel wheel lever bumper bar recline button bumper bar release button primary and secondary release lock calf rest adjustment buttons seat release button harness shopping basket brake lever backrest release toggle handlebar heigh...
Fitting and removing the wheels press to fit the rear wheels, slide the wheel shaft into the hole on the frame, until they click into place (fig.7). To remove the rear wheels, press the lever on the inside of the wheel mount (fig.8) and simply slide the wheel out (fig.9). To fit the front wheels, si...
Adjusting the handle fitting and removing the bumper to fit the bumper, slide the bumper into the receivers on either side of the chassis (fig.22) until it clicks into place (fig.23). To remove the bumper, simply press the button on either side of the chassis and remove the bumper (fig.24). To adjus...
Using the harness press fitting the seat unit the seat unit can face either forwards or backwards. To put the seat unit onto the chassis, line up the seat coupler with the chassis fittings on each side and lower onto the chassis (fig.31), ensure it clicks into place on both sides (fig.32). To remove...
Fitting the hood adjusting the hood fig. 37 fig. 40 fig. 38 fig. 41 fig. 39 fig. 42 press adjusting the calf rest using the raincover to fit the raincover, simply place the raincover over the seat and tuck under the foot rest. Fig. 43 fig. 44 fig. 46 fig. 45 to fold the hood, lift the hood adjusters...
Using the carrycot fitting the car seat on the chassis to convert the stroller into the pram, first recline the backrest (fig.47) (see page 9 for details). Then press the buttons on either side of the seat unit (fig.48) and tilt the seat until it is flat (fig.49). Unclip the clasps behind the footre...
™.
