OBaby mercury Instruction Manual - page 4

Fitting and Removing the Front Wheels

fig. 13

fig. 14

fig. 15

Using the Front Swivel Wheels

To lock the swivel wheels, first ensure the front wheels are facing forward inline with the 

chassis, then lift the lever up (fig.16).

To put the wheels in swivel mode, push the lever down on the front of each front wheel

(fig.17 & 18).

fig. 16

fig. 17

fig. 18

Adjusting the Backrest

Applying the Brakes

Lock

Release

Release

Lock

To fit the front wheels, push the wheels onto the front legs until they click into place 

(fig.13 & 14).

To Remove, squeeze both clips together whilst pulling the wheel off the leg (fig.15). 

fig. 19

fig. 20

fig. 21

“Click”

fig. 22

fig. 22a

fig. 23

1. Press

2. Pull

To recline the backrest, press the button on the toggle then slide the toggle down the 

strap and lower backrest to the desired height (fig.22 & 22a). 

To put upright, slide the toggle up the strap to the desired height (fig.23).

To lock the brakes fully, push down on each brake lever using your foot (fig.19 & 20).

To release the brakes, lift each brake lever using your foot (fig.21).

Apply the brake before putting your child into the pushchair.

Apply the brake when the pushchair is stationary.

6

7

www.obaby.co.uk

www.obaby.co.uk