DL manuals
Obihai
Telephone Accessories
OBi100
Administration Manual

Obihai OBi100 Administration Manual

Other manuals for OBi100: Quick Start Manual, Technical Specifications, Administration manual, Admin Manual

Manual is about: OBi1 Series, OBi2 Series, OBi3 Series

Page of 220

Download

Print this page

Bookmark us

Obihai Technology, Inc.

OBi Device Administration Guide

Models:

OBi1 Series – OBi100, OBi110

OBi2 Series – OBi200, OBi202

OBi3 Series – OBi300, OBi302

Version 01092013 – September 2013

1 2 3 4 5 6 7 Next › »

Summary of OBi100

Page 1
Obihai technology, inc. Obi device administration guide models: obi1 series – obi100, obi110 obi2 series – obi200, obi202 obi3 series – obi300, obi302 version 01092013 – september 2013.
Page 2
Copyright 2010-2013 obihai technology, inc. 2 introduction 6 a udience 6 w here to g o for h elp 6 n otational c onventions 6 introduction to obi devices 8 physical interfaces of the obi device 10 o verview of the ob i d evice p hysical i nterfaces 10 c onnecting p ower to the ob i d evice 10 led d ...
Page 3
Copyright 2010-2013 obihai technology, inc. 3 s ystem l evel c onfiguration o ptions 28 n etwork r elated c onfiguration o ptions 29 r outer r elated c onfiguration o ptions (ob i 202 and ob i 302 o nly ) 30 ob i w i f i n etwork r elated c onfiguration o ptions (ob i 2 s eries and ob i 3 s eries o ...
Page 4
Copyright 2010-2013 obihai technology, inc. 4 sip service provider features of the obi device 93 sip r egistration 94 sip o utbound p roxy s erver 94 dns l ookup of sip s ervers 94 nat t raversal c onsiderations 95 sip p roxy s erver r edundancy and d ual registration 95 sip p rivacy 96 stun and ice...
Page 5
Copyright 2010-2013 obihai technology, inc. 5 s peed d ial n umbers 181 u sing s peed d ial n umber as a d h oc g ateway 181 u ser d efined d igit m aps 182 sharing files on an attached external usb storage device (obi202 only) 183 f ile s haring s ettings 183 f ile e xplorer 188 obi call routing an...
Page 6
Copyright 2010-2013 obihai technology, inc. 6 introduction audience cloud service providers and managed service vars note to end users end users are highly encouraged to use the obitalk web portal to configure and manage their obi devices. The reason for this is two-fold. One, the major benefits aff...
Page 7
Copyright 2010-2013 obihai technology, inc. 7 the obi110 line port and obiline usb to fxo adapter a built-in line port is available only on the obi110 model. For obi models that have a usb port, an obiline usb to fxo adapter accessory may be attached to provide an additional line port. As such, refe...
Page 8
Copyright 2010-2013 obihai technology, inc. 8 introduction to obi devices built with a high-performance system-on-a-chip platform to ensure high quality voice conversations, obi devices are dedicated systems targeted at applications for voice over ip services. Obi devices have high availability and ...
Page 9
Copyright 2010-2013 obihai technology, inc. 9 key features of the obi voice service bridge / telephone adapter: google voice support for up to four (4) google accounts – 2 on the obi1 series, 4 on the obi2 series - google voice support not available on the obi3 series sip service provider support fo...
Page 10
Copyright 2010-2013 obihai technology, inc. 10 physical interfaces of the obi device overview of the obi device physical interfaces top views of the obi100, obi110, obi200/300 and obi202/obi302 led order (left to right): power status – internet port activity – lan port activity (obi202) – phone stat...
Page 11
Copyright 2010-2013 obihai technology, inc. 11 led description and led behaviour there are four (4) led lights on the top of the obi. They are used to provide the user with a visual indication of the working order and general status of key functional aspects of the obi device. Under normal operating...
Page 12
Copyright 2010-2013 obihai technology, inc. 12 programmable using the phone port’s mwiledtimer parameter available on obi2 series and obi3 series only new voicemail available (mwi) led icon light behavior what it means obi110 only off the port in not enabled. Solid green the line is ready to be used...
Page 13
Copyright 2010-2013 obihai technology, inc. 13 internet connection set-up and configuration connect one end of an ethernet cable to the obi internet port and the other end of the ethernet cable to an ethernet port on your internet router or ethernet switch. By default the obi will request an ip, dns...
Page 14
Copyright 2010-2013 obihai technology, inc. 14 when the phone port goes from on-hook to off-hook, in case the user needs to dial * * * to invoke the ivr, the obi will play a dial tone for 5 seconds. After 5 seconds the obi will turn silent and be ready to accept an incoming call to page. Primary lin...
Page 15
Copyright 2010-2013 obihai technology, inc. 15  ** 9 : obitalk network (pp) service route access codes for calling from the phone port can be customized if necessary by modifying phone port::digitmap and phone port::outboundcallroute. Service route access codes for calling via the auto attendant ca...
Page 16
Copyright 2010-2013 obihai technology, inc. 16 use the following urls on a web browser to launch the obi file explorer:  for anonymous level access: http:///obi_share/anonymous  for admin or user level access: http:///obi_share the file explore can be launched from either the wan or lan side of th...
Page 17
Copyright 2010-2013 obihai technology, inc. 17 dhcp server by default, the built-in dhcp server is enabled on the obi202/obi302. It assigns ip address, network mask, dns server and default gateway address to the dhcp clients on the lan side. The default gateway and dns server have the same ip addres...
Page 18
Copyright 2010-2013 obihai technology, inc. 18 in addition to the three priority classes, a fourth priority class known as the restricted class is available. The restricted class has the highest priority among the four classes. The guaranteed bandwidth for the restricted class is allocated separatel...
Page 19
Copyright 2010-2013 obihai technology, inc. 19 vlan support in router mode in router mode, the obi202/obi302 can support vlan (802.1q) on the wan side. When vlan is enabled, incoming packets from the wan side not belonging to the same vlan are dropped, while all outgoing packets to the wan side are ...
Page 20
Copyright 2010-2013 obihai technology, inc. 20 end user features available on the obi obitalk web portal: the obitalk web portal allows you to manage your obi endpoints and their relation to other endpoints in your circle of trust. Obitalk is a web portal and obi configuration utility which helps ob...
Page 21
Copyright 2010-2013 obihai technology, inc. 21 call forward on no answer: when you use call forward on no answer, all calls are forwarded to the number you indicate only when you do not answer the call with your phone attached to the obi. To enable call forward on no answer, from a phone attached to...
Page 22
Copyright 2010-2013 obihai technology, inc. 22 nordic style feature invocation in the above description of call waiting, 3-way calling, and call transfer operations, the way the features are invoked is referred to as n. America style. In nordic regions (such as sweden, norway), the same features are...
Page 23
Copyright 2010-2013 obihai technology, inc. 23 do not disturb (dnd) allows you to set the phone to immediately forward calls made to your obi to the number set-up as your voicemail number / account. If no voicemail account is set-up, the obi will return a busy signal to the caller until you turn off...
Page 24
Copyright 2010-2013 obihai technology, inc. 24 star code features the obi device supports service features via the handset connected to the phone port. The following star codes can be used to access the indicated features. Obi star code enabled features apply to all voice services. *03, request peer...
Page 25
Copyright 2010-2013 obihai technology, inc. 25 ∞ note: be careful with the speed dial set-up as this will conflict with the speed dials set-up on the obitalk portal. The speed dials that are set-up on the obitalk portal will always overwrite anything set-up via the phone connected to the obi. * note...
Page 26
Copyright 2010-2013 obihai technology, inc. 26 call forward numbers there is one set of call forward settings per voice service on the obi, such that the settings apply to incoming calls on that service only. However calls may be forwarded to numbers on the same service or on another service. Theref...
Page 27
Copyright 2010-2013 obihai technology, inc. 27 configuration and management interfaces of the obi device telephone-ivr-based local configuration the obi utilizes an interactive voice response (ivr) system for both its configuration and day-to-day function. The ivr is, in essence and automated attend...
Page 28
Copyright 2010-2013 obihai technology, inc. 28 6 please wait (while obi is checking for software update)… this is followed by either: - software update available. Press 1 to update software, or - software update not available if an update is available, press 1 to proceed with the update. The softwar...
Page 29
Copyright 2010-2013 obihai technology, inc. 29 the current value of the ivr password will be read back. Press 2 to set the default value. Press 0 to repeat the information. Press # to enter another configuration selection. 3 debug level the current value of the debug level will be read back. Press 1...
Page 30
Copyright 2010-2013 obihai technology, inc. 30 press # to enter another configuration selection. 21 ip address the current value of the ip address will be read back. Press 1 to enter a new value. Press 2 to set the default value. Press 0 to repeat the information. Press # to enter another configurat...
Page 31
Copyright 2010-2013 obihai technology, inc. 31 (effective in router mode only) 0: disable access from wan 1: enable access from wan press 0 to repeat the information. Press # to enter another configuration selection. 31 choose router or bridge mode the current value will be read back. 0: router 1: b...
Page 32
Copyright 2010-2013 obihai technology, inc. 32 41 ip address the current value of the ip address will be read back. Press 1 to enter a new value. Press 2 to set the default value. Press 0 to repeat the information. Press # to enter another configuration selection. 42 default gateway the current valu...
Page 33
Copyright 2010-2013 obihai technology, inc. 33 press # to enter another configuration selection. 101 registration state of sp1 the current value will be read back. Press 0 to repeat the information. Press # to enter another configuration selection. 102 sp1 user id the current value will be read back...
Page 34
Copyright 2010-2013 obihai technology, inc. 34 175 sp1 call forward on busy number press 1 to enter a new value. Press 2 to set the default value. Press 0 to repeat the information. Press # to enter another configuration selection. 176 sp1 call forward on no answer – enable / disable press 1 to ente...
Page 35
Copyright 2010-2013 obihai technology, inc. 35 press 2 to set the default value. Press 0 to repeat the information. Press # to enter another configuration selection. 268 sp2 block anonymous call enable press 1 to enter a new value. Press 2 to set the default value. Press 0 to repeat the information....
Page 36
Copyright 2010-2013 obihai technology, inc. 36 number press 2 to set the default value. Press 0 to repeat the information. Press # to enter another configuration selection..
Page 37
Copyright 2010-2013 obihai technology, inc. 37 obitalk configuration options additional configuration options available with the obi ivr after pressing * * * 0: selection (always press “#” after entering selection) announcement what can you do? 900 enable obitalk service the current value will be re...
Page 38
Copyright 2010-2013 obihai technology, inc. 38 press 0 to repeat the information. Press # to enter another configuration selection. 975 obitalk call forward on busy number press 1 to enter a new value. Press 2 to set the default value. Press 0 to repeat the information. Press # to enter another conf...
Page 39
Copyright 2010-2013 obihai technology, inc. 39 line (fxo) port configuration options 1 additional configuration options available with the obi ivr after pressing * * * 0: selection (always press “#” after entering selection) announcement what can you do? 90 enable / disable fxo line port the current...
Page 40
Copyright 2010-2013 obihai technology, inc. 40 customized aa prompt recording options additional configuration options available with the obi ivr after pressing * * * 0: selection (always press “#” after entering selection) announcement what can you do? 1001 option 1001 current value is: (the record...
Page 41
Copyright 2010-2013 obihai technology, inc. 41 web server-based local configuration the obi device has an integrated device management web server which can be accessed from a pc or similar device using a browser. Although all popular browsers are tested for compatibility with the obi device manageme...
Page 42
Copyright 2010-2013 obihai technology, inc. 42 web page conventions and icons & buttons: icon / button description remark this icon indicates that there is more information available which might describe the workings, limits or thresholds for the parameter to which it is adjacent. You can mouse over...
Page 43
Copyright 2010-2013 obihai technology, inc. 43 firmware: local obi device update and management updating firmware: you may upgrade the firmware for your obi device from the device configuration web page. The firmware file with which you want to upgrade the device must be stored locally on a computer...
Page 44
Copyright 2010-2013 obihai technology, inc. 44 possible error messages on firmware update failure: customized aa prompts backup & restore: up to 10 individual prompts may be recorded through the device ivr interface (see telephone-ivr-based local configuration section). These prompts may be backed u...
Page 45
Copyright 2010-2013 obihai technology, inc. 45 important note: all passwords and pins are excluded from the backup file. Hence they will not be available to restore. Call history is excluded from the backup, but can be saved as an xml formatted file separately from the call history web page. Reset c...
Page 46
Copyright 2010-2013 obihai technology, inc. 46 itsp quick start setup wizard (obi100 and obi110) the setup wizard page displays a collection of commonly used parameters in a condensed format. Each parameter listed here corresponds to a parameter inside one of the parameter groups. The setup wizard p...
Page 47
Copyright 2010-2013 obihai technology, inc. 47 mirrors system management – device admin:: adminpassword itsp settings itsp sipproxyserver host name or ip address of the sip proxy server. Mirrors service providers – itsp profile a – sip::proxyserver itsp sipproxyserverport destination port to connect...
Page 49
Copyright 2010-2013 obihai technology, inc. 49 itsp quick start setup wizard (obi202, obi302) the setup wizard page for obi202 and obi302 is very similar to that of the obi1xx, with a few additions to cover the additional istp profiles and sp services. The illustration below depicts the obi202 devic...
Page 50
Copyright 2010-2013 obihai technology, inc. 50 itsp quick start setup parameter guide (obi202) : parameter description default setting system management local time zone local time zone. Mirrors system management – networksettings:: localtimezone gmt-08:00 (pacific time) admin password administrator ...
Page 52
Copyright 2010-2013 obihai technology, inc. 52 description of voice services – spn service::uri for details on how to use this parameter. Mirrors voice services – spn service::uri spn inboundcallroute routing rule for inbound calls on this trunk. Mirrors voice services – spn service::x_inboundcallro...
Page 53
Copyright 2010-2013 obihai technology, inc. 53 status pages system status the following series of illustrations are taken from screen shots of the system status page of an obi202. The system status page is divided into several sections: wan status, wifi status, product information, obibluetooth serv...
Page 56
Copyright 2010-2013 obihai technology, inc. 56 wan status the status of the wan (ethernet) interface: includes such information as the assigned ip address, default gateway and subnet mask. Wifi status this status is only available on the obi202 and obi302. This shows the status of obiwifi and includ...
Page 57
Copyright 2010-2013 obihai technology, inc. 57 - voice disconnected: mobile phone is in a connected call, but the audio stays in the phone instead of going to obibt - 0 active calls - 1 active call: mobile phone is in a connected call, with audio going to obibt  bindingservice – the external paired...
Page 59
Copyright 2010-2013 obihai technology, inc. 59 call status the call status page shows a number of running call statistics and state parameters for each active call currently in progress. A sample call status page is shown below. For each entry on the call status page, the following buttons may be av...
Page 60
Copyright 2010-2013 obihai technology, inc. 60 call history the obi call history page shows the last 400 calls made with the obi (200 calls only on the obi100/obi110). Detailed call information is available, including what terminals were involved, the name (if available) of the peer endpoints making...
Page 61
Copyright 2010-2013 obihai technology, inc. 61 services, phone & line status statistics relevant to spn can be found on the spn stats page (where n = 1, 2, 3, 4)..
Page 62
Copyright 2010-2013 obihai technology, inc. 62 parameter description default setting reset statistics resetstatistics resets the statistics for this voice service na rtp statistics packetssent total rtp packets sent on this line na packetsreceived total rtp packets received on this line na bytessent...
Page 63
Copyright 2010-2013 obihai technology, inc. 63 parameter description default setting port status state port status, such as on-hook, off-hook, ringing na loopcurrent loop current in ma na vbat phone port battery voltage in volts. Not applicable for line port na tipringvoltage sensed differential tip...
Page 64
Copyright 2010-2013 obihai technology, inc. 64 router configuration (obi202, obi302 only) wan settings below is a screen shot of the wan settings device web page..
Page 65
Copyright 2010-2013 obihai technology, inc. 65 wan settings parameter guide: parameter description default setting internet settings addressingtype the method used for assigning ip address, subnet mask, default gateway, etc., to the device. Available choices are: dhcp: ip address, default gateway, e...
Page 66
Copyright 2010-2013 obihai technology, inc. 66 defaultgateway the default gateway ip address to assign to the device when addressingtype is set to static dnsserver1 ip address of the first dns server to use, in addition to the ones obtained from the dhcp server when dhcp is also enabled. If addressi...
Page 67
Copyright 2010-2013 obihai technology, inc. 67 - gmt+07:00(bangkok,jakarta) - gmt+08:00(beijing,hk,singapore) - gmt+09:00(tokyo,seoul) - gmt+10:00(sydney,guam) - gmt+11:00(solomon is.) - gmt+12:00(fiji,auckland) daylightsavingtimeenable enable daylight saving time on the unit yes daylightsavingtimes...
Page 68
Copyright 2010-2013 obihai technology, inc. 68 wt is optional; 1 is the default if not specified. Pri is optional only if wt is not specified; 1 is the default if not specified. Port is optional; the default to use will be based on the protocol (5060 for sip, 80 for http, etc.) . The enclosing curly...
Page 69
Copyright 2010-2013 obihai technology, inc. 69 lan settings parameter guide: parameter description default setting lan settings currentrouteripaddress the current ip address of the router on the lan side (read only). It is blank if obi is operating in bridge mode. Operationmode the networking operat...
Page 70
Copyright 2010-2013 obihai technology, inc. 70 values: router bridge routeripaddress the lan side ip address to be used by the router. If it conflicts with the wan side ip address, the obi will automatically pick a different lan side ip address to resolve the conflict. 192.168.10.1 subnetmask the la...
Page 71
Copyright 2010-2013 obihai technology, inc. 71 dhcp reservation you can reserve up to 20 specific ip addresses for the dhcp server to give out to dhcp clients with specific mac addresses. Below is a screen shot of the dhcp reservation web page. Dhcp reservation parameter guide: parameter description...
Page 72
Copyright 2010-2013 obihai technology, inc. 72 firewall and dmz firewall and dmz apply only when the obi is set to work in the router mode. The firewall filters incoming packets from the wan side only. It provides protection against some threats from the wan side. There is a global firewall enable o...
Page 73
Copyright 2010-2013 obihai technology, inc. 73 port forwarding a port forwarding rule is useful for supporting a server application on a lan client, such as ftp server or http server. On the obi 202 you can define up to 20 port forwarding rules. Below is a screen shot of the port forwarding web page...
Page 74
Copyright 2010-2013 obihai technology, inc. 74 serveripaddress the lan side ip address to forward the packet to when it is received at a port on the wan side within the port range in this rule with matching transport protocol qos settings qos only applies to upstream traffic to the wan side. The qos...
Page 76
Copyright 2010-2013 obihai technology, inc. 76 qos parameter guide: parameter description default setting qos general setting enable enable qos service (take effect in router mode only) no upstreambandwidth the total upstream bandwidth in kbps 2048 restrictedbandwidth the guaranteed bandwidth for re...
Page 77
Copyright 2010-2013 obihai technology, inc. 77 low the guaranteed uplink bandwidth allocation weight for low priority class traffic. It must be a value between 1 and 10 2 dscp to priority class mapping n (n = 0 – 63) the priority class to be assigned to the packet which has the dscp code equal to n ...
Page 78
Copyright 2010-2013 obihai technology, inc. 78 wifi settings a screenshot of the wifi settings device page is shown below..
Page 79
Copyright 2010-2013 obihai technology, inc. 79 wifi settings parameter guide: parameter description default setting basic settings enable enable obiwifi feature. You must have an obiwifi dongle attached to the obi to use the feature yes preferredaccesspoint indicate which access point to use when mo...
Page 80
Copyright 2010-2013 obihai technology, inc. 80 wifi scan the wifi scan device page offers a familiar user interface to let you scan for access points in the neighborhood. A screenshot of this page is shown below. You can click on the page one of the available ap to connect to. If the ap requires aut...
Page 81
Copyright 2010-2013 obihai technology, inc. 81 system management features of the obi device network settings this section applies to obi100/obi110 only. For obi2 series and obi3 series models, please refer to the section wan settings. Network settings parameter guide: parameter description default s...
Page 82
Copyright 2010-2013 obihai technology, inc. 82 dnsserver2 will be tried first, whichever is specified, and then the ones obtained from the dhcp server if available. Dnsserver2 ip address of the second dns server to use, in addition to the ones obtained from the dhcp server when dhcp is also enabled....
Page 83
Copyright 2010-2013 obihai technology, inc. 83 where month=1-12, day=±(1-31), weekday=0,1-7 (0=special, 1=monday, 7=sunday), hh=0-23,mm=0-59,ss=0-59. If weekday=0, daylight saving starts on the given month/day; otherwise it starts on the weekday on or after the given month/day if day > 0, or on the ...
Page 84
Copyright 2010-2013 obihai technology, inc. 84 abc.Obihai.Com=192.168.15.118,192.168.15.108 note: if the a record of a given hostname cannot be found in any of the local dns records, the device will attempt to resolve it using external dns queries. Any change applied to local dns record needs reboot...
Page 85
Copyright 2010-2013 obihai technology, inc. 85 automatic firmware update & provisioning auto provisioning parameter guide: parameter description default setting auto firmware update method current operational method of auto firmware updating. Available choices are: - disabled = do not check for f/w ...
Page 86
Copyright 2010-2013 obihai technology, inc. 86 interval when method is set to periodically, this is the number of seconds between each checking of f/w upgrade check from firmwareurl. If value is 0, device checks once only on system start (i.E., equivalent to setting method to system start) 0 firmwar...
Page 87
Copyright 2010-2013 obihai technology, inc. 87 interval when method is set to periodically, this is the number of seconds between download from configurl. If value is 0, device downloads once only on system start (i.E., equivalent to setting method to system start) 0 configurl url of config file tft...
Page 88
Copyright 2010-2013 obihai technology, inc. 88 scheduled at the beginning. Or a random delay of 10- 70s.. Interval when method is set to periodically, this is the number of seconds between download from configurl. If value is 0, device downloads once only on system start (i.E., equivalent to setting...
Page 89
Copyright 2010-2013 obihai technology, inc. 89 x_devicemanagement.Httpclient.Useragent note: there is no $ sign in front of the parameter name. The macro cannot be used in any parameter value if this value is set to blank (the default) syntaxcheckresult this is read only status value regarding the s...
Page 90
Copyright 2010-2013 obihai technology, inc. 90 fwv firmware version, such as 1.0.3.1626 any hwv hardware version, such as 2.8 any ipa device current ip address, such as 192.168.15.100 any dm device model name, such as obi110 any dmn device model number, such as 110 any obn device obi number, such as...
Page 91
Copyright 2010-2013 obihai technology, inc. 91 device administration device administration parameter guide: parameter description default setting web server port web server port number 80 adminpassword administrator password, case sensitive admin userpassword user password, case sensitive user acces...
Page 92
Copyright 2010-2013 obihai technology, inc. 92 http client useragent value of the user-agent header in all http requests which are used in firmware upgrade and auto provisioning. $dm timeout a time limit specified in number of seconds such that any file download (firmware or configuration file) by t...
Page 93
Copyright 2010-2013 obihai technology, inc. 93 device update see the section entitled, “firmware: obi device update and management” for details on device firmware updates. Sip service provider features of the obi device the following section describes the sip service provider features of the obi dev...
Page 94
Copyright 2010-2013 obihai technology, inc. 94 sip registration device can be setup to periodically register with a sip proxy server or sip registration server. Sip proxy server and sip registration server can be different, although they are usually the same in practice. Sip proxy server is a requir...
Page 95
Copyright 2010-2013 obihai technology, inc. 95 of the sip proxy server or sip registration server. The resolution of the server domain name into ip address is performed in the following manner: - try looking up the name as dns a record. If not found. - try looking up the name as dns srv record. If n...
Page 96
Copyright 2010-2013 obihai technology, inc. 96 while maintaining registration with the primary server, the obi will continually attempt to fallback to one of the candidate servers that has higher priority than the primary server, if any. The list of candidate servers that the device is trying to fal...
Page 97
Copyright 2010-2013 obihai technology, inc. 97 stun and ice the obi supports standard stun based on rfc3489 and rfc5389 for passing inbound rtp packets to the device sitting behind nat’s. The parameters that control stun feature can be found under the section itsp profile x – general:: - stunenable ...
Page 98
Copyright 2010-2013 obihai technology, inc. 98 rtp statistics – the x-rtp-stat header when ending an established call, obi device can include a summary of the rtp statistics collected during the call in the sip bye request or the 200 response to the sip bye request sent by the peer device. The summa...
Page 99
Copyright 2010-2013 obihai technology, inc. 99 itsp profile a & b (general & sp info settings) parameter guide: parameter description default setting general itsp settings name human-readable string to identify the profile instance. Maximum length = 127 characters signalingprotocol choose among the ...
Page 101
Copyright 2010-2013 obihai technology, inc. 101 itsp sip settings parameter guide: parameter description default setting proxyserver host name or ip address of the sip proxy server proxyserverport destination port to connect to the sip server 5060 proxyservertransport transport protocol to connect t...
Page 102
Copyright 2010-2013 obihai technology, inc. 102 interpreted as a fraction of the current expires value (e.G 0.1 of 60s is 6s). If value is 0 or blank, obi will determine a proper margin on its own. Note: option not available on obi100/obi110 timert1 value of sip timer t1 in ms 500 timert2 value of s...
Page 103
Copyright 2010-2013 obihai technology, inc. 103 originating a call if the from header field does not match the account credentials. Enable this option only if you are sure that the service provider allows it, e.G. An ip pbx may allow it. X_userefer enable the use of sip refer for call transfer. If d...
Page 104
Copyright 2010-2013 obihai technology, inc. 104 enabled or not x_mwisubscribeuri blank implies to use the same url as register for the to and from header as well as the request-uri otherwise, if the uri does not contain ‘@’, it is user as the userid field in to/from header as well as the request-uri...
Page 105
Copyright 2010-2013 obihai technology, inc. 105 and _sip._tls. For sip over tls. X_usereqphone include the parameter ‘user=phone’ in request-uri and to-uri of outbound invite. Note: option available on obi100/110 only no x_callwaitingindication enable inclusion of an indication in a 18x response to ...
Page 106
Copyright 2010-2013 obihai technology, inc. 106 determine if the message has been modified by an intermediary (such as a sip alg) note: option available on obi100/110 only x_echoserver name or ip address of an echo server for sip alg detection x_echoserverport listening of the echo server for sip al...
Page 107
Copyright 2010-2013 obihai technology, inc. 107 @ as its canonical name x_rtcpmux enable the use a rtcp-mux attribute in sdp (i.E., send and receive rtcp on the same port as rtp). No.
Page 108
Copyright 2010-2013 obihai technology, inc. 108 google voice™ service obi device includes a native implementation of the google talk™ (xmpp) protocol that allows the user to use the google voice™ communications service as the sp1 or sp2 service (not available on obi302). To enable google voice as th...
Page 109
Copyright 2010-2013 obihai technology, inc. 109 sp1, sp2, sp3, and sp4 services.
Page 110
Copyright 2010-2013 obihai technology, inc. 110 parameter guide: parameter description default setting sp”x” service enable enable this line yes x_servprovprofile select a service provider profile for this service. Choices are a, or b a x_ringprofile select a ring profile to ring the phone port with...
Page 111
Copyright 2010-2013 obihai technology, inc. 111 x_inboundcallroute routing rule for directing incoming calls on this service. The default rule is to send all incoming calls to the phone port (ph). See obi call routing and digit map section for a description of the syntaxes for specifying this parame...
Page 112
Copyright 2010-2013 obihai technology, inc. 112 sip messages for keep-alive are sent only once without retransmission; response to the sip messages are ignored by the obi. Note: option not available on obi100 and obi110 x_useragentport udp port where the device sends and listens for sip messages 506...
Page 113
Copyright 2010-2013 obihai technology, inc. 113 where is the 9-digit obi number of this device, this sp’s x_useragentport parameter. For example, sp1 has a local_client with the userid 4086578118 and the client wants to make and receive calls using sp3 which is set up for google voice. The sp1 inbou...
Page 114
Copyright 2010-2013 obihai technology, inc. 114 active call to leave voicemail. Requires a va attribute with the target mailbox id, such as “00”, “01”, …, as the value o “send to park”: blind transfer the current call to a parking lot partition. Requires a va attribute with the parking lot partition...
Page 115
Copyright 2010-2013 obihai technology, inc. 115 note: option not available on obi100/obi110 sp”x” sip credentials authusername the user id to authenticate to a sip uas (user agent server) when an outbound sip request sent by the device is challenged by the uas with a 401 or 407 response authpassword...
Page 116
Copyright 2010-2013 obihai technology, inc. 116 phone using a star code callforwardunconditionalnumber directory number to forward all incoming calls on this service unconditionally. Maximum length is 127 characters. Note: it is possible for a user to set this parameter from the phone using a star c...
Page 117
Copyright 2010-2013 obihai technology, inc. 117 vmwi signal on the phone2 port if x_vmwienable is set to yes note: option available on obi202/obi302 only x_vmwienable enable visual message waiting indication for this service for the phone port (or phone1 port) no x_vmwienable2 enable visual message ...
Page 118
Copyright 2010-2013 obihai technology, inc. 118 - disable srtp = do not use srtp for all calls; the call will fail if the peer insists on using srtp only - use srtp only = require all calls to use srtp; the call will fail if the peer does not support srtp - use srtp when possible = use srtp for a ca...
Page 119
Copyright 2010-2013 obihai technology, inc. 119 obitalk service settings obitalk service settings parameter guide: parameter description default setting enable enable the obitalk service (the built-in free voice service that comes with every obi device) yes localport the udp or tcp port used by devi...
Page 120
Copyright 2010-2013 obihai technology, inc. 120 defaultring default ring pattern number to ring the phone port for incoming calls on this trunk that are routed to the phone port according to the inboundcallroute of this service. The ring pattern is taken from the selected ring profile. Valid choices...
Page 121
Copyright 2010-2013 obihai technology, inc. 121 note: it is possible for a user to set this parameter from the phone using a star code callforwardonbusynumber directory number to forward all incoming calls on this service when the device is busy. Maximum length is 127 characters. Note: it is possibl...
Page 122
Copyright 2010-2013 obihai technology, inc. 122 obitalk inbound direct dialing authentication parameter guide: parameter description default setting authmethod the obitalk protocol allows incoming calls to indicate a target number that is different from this device’s obi number. The device in that c...
Page 123
Copyright 2010-2013 obihai technology, inc. 123 auto attendant service automated attendant the obi call processing auto attendant (aa) invoked by including “aa” in the inbound call routing rule associated the interface on the obi processing an incoming call. When connecting to the aa in this manner,...
Page 124
Copyright 2010-2013 obihai technology, inc. 124 automated attendant: ivr announcement number attendant announcement what happens next: 1 press 1 to continue this call. When accessed from the obitalk, 2 press 2 to make a new call. If “usepin” authentication is enabled and the user enters a matching p...
Page 125
Copyright 2010-2013 obihai technology, inc. 125 each prompt list control elements starts with a ‘&’ in a prompt list. The following control elements are supported: &pause() = pause playing for a number of seconds as given by the parameter an example of prompt list: %user1%;r=105,&pause(3),%user5%,%u...
Page 127
Copyright 2010-2013 obihai technology, inc. 127 user prompts parameter guide: parameter description default setting userdescription = 1-10 a text string that describes the contents of this user prompt userlength = 1-10 this is a read-only status parameter. It shows the space occupied by this prompt ...
Page 128
Copyright 2010-2013 obihai technology, inc. 128 like this: {0:ph,ph2} which forks to ring both phone1 and phone2. In general you can have up to 4 destinations is a forking rule. On the other hand, you must not specify more than one destination number on the obi100 and obi110. {([1-9]x?*(mpli)):pp}, ...
Page 129
Copyright 2010-2013 obihai technology, inc. 129 they select the option to make a further call. If pin1, pin2, pin3, and pin4 are all empty, device treats it as if usepin is set to no. Otherwise, the caller must enter one of the non-empty pin in order to proceed, pin1 pin code to make a call (must be...
Page 130
Copyright 2010-2013 obihai technology, inc. 130 voice gateways a gateway in this context is another obi device which lets incoming obitalk callers to call further on one or more of its trunks (such as sp1, sp2, or li). The caller can call the gateway first with a normal obitalk call, get the aa, and...
Page 131
Copyright 2010-2013 obihai technology, inc. 131 voice gateway parameter guide: parameter description default setting trunk group n (n=1–8) enable enable this voice gateway yes name an arbitrary user-friendly name to identify this gateway (optional) accessnumber the gateway’s obitalk number, includin...
Page 132
Copyright 2010-2013 obihai technology, inc. 132 trunk groups as the name implies, a trunk group is a group of trunks. If a call is routed to a trunk group, obi picks one of the available trunks from the group to make the call. Availability of trunk is based on: - whether the trunk’s digit map allows...
Page 133
Copyright 2010-2013 obihai technology, inc. 133 for other tg, the default is (xx.) obibluetooth this feature is available only on models with a usb port i.E. Obi2 series and obi3 series devices.). The obibluetooth feature requires an obibt bluetooth adapter usb dongle (sold separately) connected to ...
Page 134
Copyright 2010-2013 obihai technology, inc. 134 after an initial pairing and connection with the mobile phone, obibt will automatically request connection with the same phone next time it comes in range. If it still remembers the pairing information with obibt, your mobile phone would also quietly a...
Page 136
Copyright 2010-2013 obihai technology, inc. 136 obibluetooth parameter guide: parameter description default setting enable enable the obitalk service (the built-in free voice service that comes with every obi device) yes digitmap digit map to restrict numbers that can be dialed or called with this s...
Page 137
Copyright 2010-2013 obihai technology, inc. 137 is in a busy state (such as ringing, dialing, playing reorder, or already having 2 calls in progress) note: it is possible for a user to set this parameter from the phone using a star code callforwardonbusynumber directory number to forward all incomin...
Page 138
Copyright 2010-2013 obihai technology, inc. 138 from the caller before making a second call to brige with the original call. This option is useful since inband dtmf detection on a bt channel is not very reliable. Obibluetooth device settings parameter guide: parameter description default setting dis...
Page 139
Copyright 2010-2013 obihai technology, inc. 139 - repeat dial calls are not logged to call history, except the last and successful one when the called party rings or answers..
Page 141
Copyright 2010-2013 obihai technology, inc. 141 phone port parameter guide: parameter description default setting phone port enable enable the phone port yes digitmap this digit map serves to restrict the numbers that can be dialed or called from the phone port. If the caller dials a number that is ...
Page 142
Copyright 2010-2013 obihai technology, inc. 142 for obi202/obi302 phone1: {([1-9]x?*(mpli)):pp}, {():li}, {():ph2}, {((mli)):li}, {((mbt2)):bt2}, {((mbt)):bt}, {((mbt)):bt}, {**0:aa},{***:aa2}, {((msp1)):sp1}, {((msp2)):sp2}, {((msp3)):sp3}, {((msp4)):sp4}, {((mpp)):pp}, {(mpli):pli} for obi202/obi3...
Page 143
Copyright 2010-2013 obihai technology, inc. 143 {sp2:(xx.)}, {sp3:(xx.)}, {sp4:(xx.)}, {pp:(xx.)} primaryline by primary line we mean the service that does not require any access code prefix (such as **1 or **9) when dialing; it is the default service to be used for making the call when no explicit ...
Page 144
Copyright 2010-2013 obihai technology, inc. 144 will cause the obi to interleave the ring signal applied to each port to reduce the chance of overloading the power supply. Note: option available only on obi202/obi302 port settings onhooktipringvoltage tip/ring voltage when the attached phone is on h...
Page 145
Copyright 2010-2013 obihai technology, inc. 145 callcommandsignalmethod select the method to signal a command to the obi when the phone is off-hook with an active call in connected state, while there is a second call on hold or ringing. The two choices are: - n. America (uses hook switch events only...
Page 146
Copyright 2010-2013 obihai technology, inc. 146 callwaitingcalleridenable enable call waiting caller id (cwcid) signal generation. Cwcid signal is sent to the phone when it is in the off hook state. It starts with a handshake between the obi device and the attached phone, by exchanging audible short...
Page 147
Copyright 2010-2013 obihai technology, inc. 147 conference calls (sip only). In addition, the following rule {cbridge:spx(bridge-userid)} must also added to the phone port’s outboundcallroute parameter, where x=1,2,3,4, and bridge-userid the userid of the conference bridge sua. Note that the keyword...
Page 148
Copyright 2010-2013 obihai technology, inc. 148 otherwise. This option is only available on the obi110 and devices with an attached obiline usb to fxo adapter accessory. Enablephoneportbargein enable the caller to barge in when he calls the other phone port from this phone port while the other phone...
Page 149
Copyright 2010-2013 obihai technology, inc. 149 switch from off-hook state to on-hook state, and back to off-hook state. This parameter specifies the upper time limit in milliseconds such that if the hook switch stays at the intermediate on-hook state for longer than this time limit, the obi device ...
Page 150
Copyright 2010-2013 obihai technology, inc. 150 note: option not available on obi100 and obi110 (where the short inter-digit timer is always 2s) tip ring voltage polarity idlepolarity tip/ring voltage polarity the line is idle, before a call is connected, or after one side hangs up. Choices are: for...
Page 151
Copyright 2010-2013 obihai technology, inc. 151 " where … - ver is a monotonically increasing integer on each notify, starting with 0 - full-or-partial is either o full (for the immediate notify triggered by a subscribe), or o partial (for the notify triggered by a status change on the line port) - ...
Page 152
Copyright 2010-2013 obihai technology, inc. 152 port. Typically this is a very short distinctive ring pattern that serves as a reminder to the user that a call is being on hold. The ring pattern is taken from the selected ring profile. Valid choices are: no ring, or 1-10 tone profile select a tone p...
Page 153
Copyright 2010-2013 obihai technology, inc. 153 from the phone using a star code callforwardunconditionalnumber directory number to forward all incoming calls on this service unconditionally. Maximum length is 127 characters. Note: it is possible for a user to set this parameter from the phone using...
Page 154
Copyright 2010-2013 obihai technology, inc. 154 note: it is possible for a user to set this parameter from the phone using a star code bridgedoutboundcallmaxduration limit on the call duration in seconds for all outbound calls that are bridged from another trunk. A blank or 0 value implies the call ...
Page 155
Copyright 2010-2013 obihai technology, inc. 155 detectpolarityreversal enable polarity reversal detection yes detectfarendlongsilence eanble the detection of long period of voice inactivity as a trigger to end the current call yes silencedetectsensitivity pstn line silence detection servers the purp...
Page 156
Copyright 2010-2013 obihai technology, inc. 156 ringindicationdelaytime time in ms between ring signal validated and valid ring signal indicated 512 ringtimeout time (ms) elapsed since last ring threshold crossing to declare ring is over 1408 ringerimpedance synthesized ringer impedance to meet spec...
Page 160
Copyright 2010-2013 obihai technology, inc. 160 codec profile parameter guide: parameter description default setting g711u codec codec codec name g711u bitrate bit rate in bits/sec. Note: informational only; not configurable 64000 enable enable this codec yes silencesuppression enable silence suppre...
Page 161
Copyright 2010-2013 obihai technology, inc. 161 priority priority assigned to this codec (1 is the highest) 2 payloadtype standard payload type for g711-alaw note: informational only; not configurable 8 g729 codec codec codec name g729 bitrate bit rate in bits/sec note: informational only; not confi...
Page 162
Copyright 2010-2013 obihai technology, inc. 162 payloadtype dynamic payload type for this codec. Valid range is 96-127 105 ilbc codec 4 codec codec name ilbc bitrate bit rate in bits/sec two values to choose from: 13333 bps or 15200 bps 13333 enable enable this codec no silencesuppression enable sil...
Page 163
Copyright 2010-2013 obihai technology, inc. 163 tone & ring patterns note: tone and ring profile a default settings are set for usa telephone standards. Tone and ring profile b default settings are set for australia telephone standards. Tone profile features of the obi device the general format for ...
Page 164
Copyright 2010-2013 obihai technology, inc. 164 t(f_0/on_0+off_0,f_1/on_1+off_1,f_2/on_2+off_2,f_3/on_3+off_3) t: the cadence segment duration in seconds negative value: tone plays indefinitely no value: tone plays indefinitely zero value: the duration of this particular segment is zero positive val...
Page 165
Copyright 2010-2013 obihai technology, inc. 165 tone examples: with these examples, we will show the interpretation of a few common tone patterns: dial tone: dial, "350-18,440-18" dial tone is generated as a mixture of two frequency components: 350 hz at -18 dbm and 440 hz at -18 dbm the expiration ...
Page 166
Copyright 2010-2013 obihai technology, inc. 166 the 4th on-off section: only generate silence since no frequency component is specified. It has tone 0 second active time and 4 seconds inactive time. Stutter tone: stutter, "350-18,440-18;20;.2(.1+.1);()" stutter dial tone is generated from a mixture ...
Page 167
Copyright 2010-2013 obihai technology, inc. 167 tonename busy tone tonepattern obihai tone pattern script 480-18,620-18;10;(.5+.5) reorder tone tonename reorder tone or fastbusy tonepattern obihai tone pattern script 480-18,620-18;10;(.25+.25) confirmation tone tonename confirmation tone tonepattern...
Page 168
Copyright 2010-2013 obihai technology, inc. 168 tone profile parameter guide: continued . . . Parameter description default setting call forwarded dial tone tonename call forwarded dial tone: a special dial tone to indicate call-forward-all is active (not configurable) tonepattern obihai tone patter...
Page 169
Copyright 2010-2013 obihai technology, inc. 169 tonepattern obihai tone pattern script 914-16,1371-16,1777- 16;20;(1/.274+0,2/.274+0,4/.380+0,0/0+4) sit tone 3 tonename special information tone - 3 (not configurable) tonepattern obihai tone pattern script 914-16,1371-16,1777- 16;20;(1/.380+0,2/.380+...
Page 170
Copyright 2010-2013 obihai technology, inc. 170 field –2 to field –5 composition: field - 2/3/4/5 share the same definition, and each field describes one single cadence segment. Together, the four (4) fields form a macro-segment, which will be repeated until ringing expires. The expression is a stri...
Page 171
Copyright 2010-2013 obihai technology, inc. 171 parameter description default setting call waiting tone 1 tonename distinctive call waiting tone 1. An incoming sip invite may include the same name in an alert-info header to choose this ring bellcore-dr1 tonepattern obihai tone pattern script 440-18;...
Page 172
Copyright 2010-2013 obihai technology, inc. 172 call waiting tone 6 tonename distinctive call waiting tone 6. An incoming sip invite may include the same name in an alert-info header to choose this ring user-dr1 tonepattern obihai tone pattern script 440-18;30;(.1+.1,.3+.2,.3+10) call waiting tone 7...
Page 173
Copyright 2010-2013 obihai technology, inc. 173 ring profile parameter guide: parameter description default setting ring pattern 1 ringname name of the ring. An incoming sip invite may include the same name in an alert-info header to choose this ring bellcore-dr1 ringpattern obihai tone cadence scri...
Page 175
Copyright 2010-2013 obihai technology, inc. 175 star code profile features of the obi device star codes are short sequences of digits where each sequence serves as a command to the obi device to perform certain operation. Each sequence usually starts with the * key followed by a 2-digit code (such a...
Page 176
Copyright 2010-2013 obihai technology, inc. 176 $noec1 = disable echo canceller once in the next call on this phone port (phone-port specific; admissible value: 1) (not available on obi100/obi110) $noji1 = disable jitter buffer adjustment once in the next call on this phone port (phone-port specific...
Page 177
Copyright 2010-2013 obihai technology, inc. 177 set(var,token) = set the given var to the value represented by token. Call(token) = call the number represented by token. O phone port::outboundcallroute will be applied when making the call (but not the digitmap) rpdi(token) = repeat dial the number r...
Page 178
Copyright 2010-2013 obihai technology, inc. 178 - same as kat except applies the result on sp1 service only *67, block caller id once, set($bci1,1) - enable masking of caller id information once for the next call on any trunk *99, disable echo canceller for one call, set($noec1,1) - disable the echo...
Page 179
Copyright 2010-2013 obihai technology, inc. 179 star code profile parameter guide: parameter description default setting code1 default = redial star code *07, redial, call($ldn) code2 default = call return star code *69, call return, call($lcn) code3 default = block caller id (persistent) star code ...
Page 180
Copyright 2010-2013 obihai technology, inc. 180 (requires obiplus subscription) code35 *28, obibt discoverable, btdscvr(1) code36 code37 code38 code39 code40 note: code31 – code40 are not available on obi100 and obi110
Page 181
Copyright 2010-2013 obihai technology, inc. 181 user settings features of the obi device speed dial numbers each obi device supports 99 speed dial numbers. The 99 speed dial slots are numbered from 1 to 99 and are invoked by dialing a 1 or 2-digit number corresponding to the slot number. Speed dials...
Page 182
Copyright 2010-2013 obihai technology, inc. 182 parameter description default setting 1 speed dial 1 2 speed dial 2 3 speed dial 3 to to 99 speed dial 99 user defined digit maps for an explanation of this feature, please refer to the section user defined digit maps under digit map configuration. Use...
Page 183
Copyright 2010-2013 obihai technology, inc. 183 sharing files on an attached external usb storage device (obi202 only) file sharing settings there are three levels of access to the files stored on a usb storage device attached to the obi202: - admin: always enabled and requires login as the admin. A...
Page 184
Copyright 2010-2013 obihai technology, inc. 184 here is a screen short of the file sharing settings device web page..
Page 186
Copyright 2010-2013 obihai technology, inc. 186 file sharing parameter guide: parameter description default setting file sharing enableaccessfromwan while accessing files on the attached usb storage device from the lan side of the obi is always enabled, accessing the files from the wan side may be d...
Page 187
Copyright 2010-2013 obihai technology, inc. 187 password password is case-sensitive. It must be an alphanumeric string and must not contain any space. Maximum password length is 64 characters. Homedirectory the home directory for anonymous level access, such that user cannot navigate the file system...
Page 188
Copyright 2010-2013 obihai technology, inc. 188 file explorer the file explorer web page can be launched by clicking the file explorer link on the obi device webpage or visit the link: http:///obi_share. You may be requested to login with a valid userid and password. To use the file explorer as an a...
Page 189
Copyright 2010-2013 obihai technology, inc. 189 the current directory path information is with respect to the home directory of the login user. The symbol represents the home directory which is always at the root of the path. Each level in the directory path is separated from the previous level with...
Page 190
Copyright 2010-2013 obihai technology, inc. 190 for entering the path name when you click this icon delete - remove the selected files and sub-directories permanently from the usb storage device. This operation cannot be undone. Available only when one or more files or sub- directories are selected....
Page 191
Copyright 2010-2013 obihai technology, inc. 191 obi call routing and digit map trunks, endpoints, and terminals an obi device is a voice service bridge (vsb) that supports multiple voice services. It can bridge calls across any of the supported services. By a call bridge we refer to a voice connecti...
Page 192
Copyright 2010-2013 obihai technology, inc. 192 - ph1 = the phone port (same as phone1 port) - ph2 = the phone2 port 5 - aa1 = the auto attendant unless stated otherwise, abbreviated endpoint names are case insensitive. A trunk or an endpoint is also referred to as a terminal in this document. The f...
Page 193
Copyright 2010-2013 obihai technology, inc. 193 inbound call route configuration every trunk has a corresponding inboundcallroute in the obi device configuration. It is a comma separated list of rules where each rule is also surrounded by a pair of curly braces { }. No extra white spaces are allowed...
Page 194
Copyright 2010-2013 obihai technology, inc. 194 - spoofed-caller-number is a literal string, such as 14081112233, to be used as the caller number for making a new call on the specified trunk - (mlabel) is a named digit map, where label is the abbreviated name of any terminal that has a digit map def...
Page 197
Copyright 2010-2013 obihai technology, inc. 197 - dial # key to connect to the line port; obi will take the line port hardware to off-hook but will not dial out any digit. The net result is that the user will hear dial tone generated by the pstn company if a working line is connected to the line por...
Page 198
Copyright 2010-2013 obihai technology, inc. 198 some extra digits in certain part of the dialed digits. The literals part can be empty also but the ‘:’ must not be omitted. This case is useful for removing part of dialed digits. Elements and literals must not be both empty. (map) – an embedded digit...
Page 199
Copyright 2010-2013 obihai technology, inc. 199 **1(msp1) – matches any number that starts with **1 and with the rest of digits matching the digitmap in the sp1 service – matches an empty phone number and replaces with 1234. This is the syntax for a hotline to 1234.
Page 200
Copyright 2010-2013 obihai technology, inc. 200 - indefinitely matched (im) – the rule matches the accumulated input sequence indefinitely, with a variable length such that the rule can potentially stay as im as more matching digits are entered. Example: 011853 indefinitely matches the rules xx., 01...
Page 202
Copyright 2010-2013 obihai technology, inc. 202 rb = ringback tone ro = reorder tone (same as fast busy) si1 – si4 = sit tone 1 – 4, respectively st = stutter tone 0 – 9, *, #, a – d = dtmf 0 – 9, *, #, a – d respectively change inter-digit long timer dynamically after partial match the obi starts o...
Page 203
Copyright 2010-2013 obihai technology, inc. 203 number will be translated into @... And @...: respectively. Here are some examples: 1234*192*168*15*113 maps to 1234@192.168.15.113 123456*192*168*15*180*5061 maps to 123456@192.168.15.180:5061.
Page 204
Copyright 2010-2013 obihai technology, inc. 204 specifications & environmental characteristics of the obi device obi100 general brand obihai browse obihai devices manufacturer obihai hardware designer obihai technology, inc. Model name obi100 release date march 2011 microprocessor chip vendor obihai...
Page 205
Copyright 2010-2013 obihai technology, inc. 205 rtp packet count (tx/rx) rtp byte count (tx/rx) peer clock differential rate - ppm packets in jitter buffer packets out-of-order packets interpolated packets late (dropped) packets lost packet loss rate % packet drop rate % jitter buffer length - ms re...
Page 206
Copyright 2010-2013 obihai technology, inc. 206 g.726 (40/32/24/16) g.729a codec pre-selection code voice processing per sip service – tx/rx audio gain, echo cancellation adjustable audio frames per packet codec name assignment codec profile per sip sp (2) & obitalk service dynamic audio payload pac...
Page 207
Copyright 2010-2013 obihai technology, inc. 207 anonymous call do not disturb call return repeat dialing call progress tones configurable call progress tone call progress tone profiles (2) dial tone busy tone ringback tone reorder tone confirmation tone holding tone second dial tone stutter tone how...
Page 208
Copyright 2010-2013 obihai technology, inc. 208 ices-003 yes rohs yes weee yes ul/cul yes – power adapter environmental operating temperature 0º to 45º c (32º to 113º f) storage temperature -25º to 85º c (-13º to 185º f) operating humidity 10% to 90% non-condensing non-operating humidity 10% to 90% ...
Page 209
Copyright 2010-2013 obihai technology, inc. 209 obi110 general brand obihai browse obihai devices manufacturer obihai hardware designer obihai technology, inc. Model name obi110 release date november 2010 microprocessor chip vendor obihai soc width of machine word 32 bit instruction set mips fxs sli...
Page 210
Copyright 2010-2013 obihai technology, inc. 210 caller id detect method: fsk (bell 202), fsk (v.23), dtmf (fi, se, dk) dtmf playback level fxo (line port) ring detection ring detection ring frequency min ring frequency max ring threshold: 40.50-49.50 vrms, 19.35-23.65 vrms, 13.50-16.50 vrms ring val...
Page 211
Copyright 2010-2013 obihai technology, inc. 211 network – application details data networking mac address (ieee 802.3) udp (rfc 768) tcp (rfc 793) ip version 4 (rfc 791) – static ip and dhcp support icmp (rfc 792) arp - address resolution protocol rtp (rfc 1889, 1890) rtcp (rfc 1889) dhcp client (rf...
Page 212
Copyright 2010-2013 obihai technology, inc. 212 sip service configurable inbound call routing rule (2) direct / single-stage dialing (route to voice gateway) fax pass through (g.711) modem pass through (g.711) in-band dtmf (g.711) out of voice band dtmf (rfc 2833) out of voice band dtmf (info method...
Page 213
Copyright 2010-2013 obihai technology, inc. 213 call return activate block caller id deactivate block caller id block caller id once unblock caller id once activate call forwarding (all calls) deactivate call forwarding (all calls) activate call forward on busy deactivate call forward on busy activa...
Page 214
Copyright 2010-2013 obihai technology, inc. 214 power supply type universal switching with fixed us, eu, uk or au style plug prongs (model dependent) input power ac input: 100 to 240 volts 0.3a 50-60hz (26-34 va) output power dc: +12v 1.0 amp max carton specifications units per carton 20 units carto...
Page 215
Copyright 2010-2013 obihai technology, inc. 215 obi202 / obi302 general brand obihai browse obihai devices manufacturer obihai hardware designer obihai technology, inc. Model name obi202 / obi302 release date april 2012 / june 2012 microprocessor width of machine word 32 bit instruction set arm fxs ...
Page 216
Copyright 2010-2013 obihai technology, inc. 216 packets interpolated packets late (dropped) packets lost packet loss rate % packet drop rate % jitter buffer length - ms received interarrival jitter - ms dtmf digits received jitter buffer underruns jitter buffer overruns sequence number discontinuiti...
Page 217
Copyright 2010-2013 obihai technology, inc. 217 - pptp (point-to-point tunneling protocol) - l2tp (layer 2 tunneling protocol) voip four (4) service provider configuration profile assignments (itsp 1-4) four (4) service /trunk subscription profile assignments (sp 1-4) sipv2 (rfc 3261, 3262, 3263, 32...
Page 218
Copyright 2010-2013 obihai technology, inc. 218 silence suppression comfort noise generation three way conference calling with local mixing hook flash event signaling flash hook timer caller id – name & number per bellcore, etsi and dtmf mwi – message waiting indicator visual message waiting indicat...
Page 219
Copyright 2010-2013 obihai technology, inc. 219 activate do not disturb deactivate do not disturb activate repeat dial deactivate repeat dial interfaces & indicator lights internet (wan) 1 x 10/100baset ethernet port (802.3) lan 1 x 10/100baset ethernet port (802.3) phone (fxs) 2 x rj-11 fxs analog ...
Page 220
Copyright 2010-2013 obihai technology, inc. 220 analog touch tone phone access to internet via a switched ethernet port on home or office router (optional) active internet phone service subscription with all required sip credentials to make & receive calls documentation quick start / installation gu...