Observint MC104DVR Quick setup manual - Example
5
To navigate the Video, Capture and Play modes configuration menus and change settings:
1.
Power on the Camera/DVR unit, if needed.
2.
If the unit is recording video, stop recording by pressing the REC/SNAP button.
3.
Press the MENU button once to open the configuration menu for the mode the camera is operating in. The mode is indicated by
the icon in the upper right corner (see the scene examples above) for Video mode (
), Capture mode ( ), and
Play mode (
).
4.
Use the UP and DOWN buttons to highlight the parameter you want to change, then press the REC/SNAP button to open the
options list.
5.
Use the UP and DOWN buttons to highlight the option you want to select, then press the REC/SNAP button to select the
option and return to the parameters list.
6.
Repeat steps 4 and 5 to select the other options you want to use in the current mode.
7.
Press the MENU button to close the configuration menu.
8.
Press the MODE button to select a different mode, then repeat the steps above to select the options you prefer for the mode.
9.
Repeat this steps 1 through 8 to configure the third mode.
To navigate the SETUP configuration menus and change settings:
To procedure to make configuration changes in the Setup menus is the same as the procedure to configure the modes, except that,
to open the Setup menus, press the MENU button twice when in any mode, then follow steps 4 through 7 above to select the
configuration options you want to use and close the menus. See the following example.
Example
: Formatting the SD or MMC card
It is highly recommended that you format SD or MMC cards with the Camera/DVR before using them for the first time.
1.
If the unit is recording video, stop recording by pressing the REC/SNAP button.
2.
Press the MENU button twice to open the Setup configuration menu.
3.
Since the FORMAT parameter is automatically highlighted, press the REC/SNAP button to open the options list.
4.
Press the DOWN button once to highlight Execute.