Summary of cm2522
Page 1
Océ cm3522/ cm2522 enlarge display operations user’s guide printing for professionals.
Page 2: Introduction
Océ cm3522/cm2522 x-1 introduction thank you for choosing this machine. The océ cm3522/cm2522 user’s guide [enlarge display operations] contains details on the operation of the various functions available in the enlarge display mode of the océ cm3522/cm2522 and on the various operating precautions. ...
Page 3
Océ cm3522/cm2522 x-2 [ ] names highlighted as shown above indicate keys on the control panel and buttons in the touch panel..
Page 4: Contents
Océ cm3522/cm2522 x-3 contents 1 before use 1.1 names of control panel parts and their functions ................... 1-2 1.2 adjusting the angle of the control panel ................................... 1-4 1.2.1 to adjust the angle of the control panel ......................................1-4 1.3 s...
Page 5: 3 Using Fax/scan Functions
Océ cm3522/cm2522 x-4 2.5 selecting original and copy settings ....................................... 2-11 2.5.1 selecting single-sided or double-sided copies .........................2-12 2.6 selecting a combined copy setting ......................................... 2-14 2.7 selecting finishing s...
Page 6
Océ cm3522/cm2522 x-5 3.3.3 resolution ..................................................................................3-17 3.3.4 density .......................................................................................3-19 3.3.5 file type .......................................................
Page 7
Océ cm3522/cm2522 x-6.
Page 8: Before Use
1 before use.
Page 9: Before Use
Océ cm3522/cm2522 1-2 before use 1 1 before use 1.1 names of control panel parts and their functions 2 note for details, refer to the user’s guide [copy operations], the user’s guide [network scan/fax/network fax operations]. No. Part name description 1 touch panel displays various screens and messa...
Page 10
Océ cm3522/cm2522 1-3 before use 1 6 [reset] key press to clear all settings (except programmed settings) entered in the control panel and touch panel. 7 [stop] key pressing the [stop] key during an operation temporarily stops the operation. 8 [proof copy] key press to print a single proof copy to b...
Page 11: 1.2
Océ cm3522/cm2522 1-4 before use 1 1.2 adjusting the angle of the control panel the control panel can be adjusted to either of three angles. In addition, the control panel can be tilted to the left. Adjust the control panel to the angle that allows for easy operation. 1.2.1 to adjust the angle of th...
Page 12
Océ cm3522/cm2522 1-5 before use 1 2 to tilt the control panel to the left, hold the bottom of the control panel, and then tilt the panel to the left. – do not grab the touch panel when turning the control panel to the left or right..
Page 13: 1.3
Océ cm3522/cm2522 1-6 before use 1 1.3 screens in enlarge display mode 1.3.1 displaying screens in enlarge display mode 1 press the [copy] or [fax/scan] key in the control panel to display the desired screen. 2 press the [enlarge display] key in the control panel. – depending on the settings specifi...
Page 14
Océ cm3522/cm2522 1-7 before use 1 ! Detail the default settings for enlarge display mode can be changed. To change the default settings, specify desired settings in enlarge display mode, and then press the [accessibility] key. On the accessibility setting screen 2/2, touch [default enlarge display ...
Page 15: 1.4
Océ cm3522/cm2522 1-8 before use 1 1.4 touch panel 1.4.1 touch panel operation to activate a function or to select a setting, lightly touch the button in the touch panel for the desired function or setting. 2 reminder do not apply extreme pressure to the touch panel, otherwise it may be scratched or...
Page 16: 1.4.3
Océ cm3522/cm2522 1-9 before use 1 1.4.3 paper type icons 2 note for details, refer to the user’s guide [copy operations]. If paper other than plain paper is specified for the selected paper tray when using a copy function, the icon indicating the paper type appears under "paper" in the basic screen...
Page 17: 1.4.4
Océ cm3522/cm2522 1-10 before use 1 1.4.4 paper supply icons the amount of paper remaining is indicated in the copy mode screen where the paper size is selected. For details about the screen for selecting the paper size, refer to "selecting the paper settings" on page 2-6 . Paper supply icons that a...
Page 18: 1.5
Océ cm3522/cm2522 1-11 before use 1 1.5 feeding the original 2 note for details, refer to the user’s guide [copy operations] and the user’s guide [network scan/fax/network fax operations]. The original can be fed in either of the following ways. Be sure to position the original correctly according t...
Page 19: 1.5.2
Océ cm3522/cm2522 1-12 before use 1 2 slide the lateral guides against the edges of the original. 1.5.2 placing the original on the original glass 1 lift open the adf or the original cover. – when placing the original on the original glass, be sure to lift open the adf or the original cover at least...
Page 20
Océ cm3522/cm2522 1-13 before use 1 3 align the original with the mark in the back-left corner of the original scales. 4 close the adf or the original cover. Original scales.
Page 21: 1.6
Océ cm3522/cm2522 1-14 before use 1 1.6 specifying original settings 2 note for details, refer to the user’s guide [copy operations]. To make desired copies, specify status, direction and other setting items for originals. For details on selecting the original type when using fax/scanning functions,...
Page 22
Océ cm3522/cm2522 1-15 before use 1 3 place the original in the original feed tray in the order to be scanned with the side to be scanned faces up. – slide the lateral guides against the edges of the original. – load the original pages into the adf so that the top of the pages is toward the left sid...
Page 23: 1.6.2
Océ cm3522/cm2522 1-16 before use 1 5 touch [mixed original]. – to cancel the "mixed original" setting, touch [mixed original] again to deselect it. 1.6.2 loading folded originals ("z-folded original" setting) if folded originals are loaded into the adf to be copied, the original size is correctly d...
Page 24
Océ cm3522/cm2522 1-17 before use 1 2 in the main screen, touch the original/density tab. The original/density screen appears. 3 touch [z-folded original]. – to cancel the "z-folded original" setting, touch [z-folded original] again to deselect it..
Page 25: 1.6.3
Océ cm3522/cm2522 1-18 before use 1 1.6.3 selecting the original orientation (original direction settings) when copying double-sided originals or making double-sided copies or combined copies, specify the original orientation, otherwise the copies may not be printed in the correct page order or corr...
Page 26
Océ cm3522/cm2522 1-19 before use 1 3 touch [original direction]. From the duplex/combine screen from the original/density screen the original direction screen appears. 4 touch the button for the orientation of the loaded original, and then touch [ok]. – to return to the main screen, touch [main scr...
Page 27: 1.6.4
Océ cm3522/cm2522 1-20 before use 1 1.6.4 selecting the position of the binding margin (original binding position/binding position settings) if a double-sided original is loaded into the adf, specify the position of the top of the back side of the original by specifying the binding margin position f...
Page 28
Océ cm3522/cm2522 1-21 before use 1 3 in the duplex/combine screen, touch [original binding pos.]. Otherwise, touch [binding position] in the original/density screen. From the duplex/combine screen from the original/density screen 4 touch the button for the desired binding margin position, and then ...
Page 29
Océ cm3522/cm2522 1-22 before use 1 from the binding position screen – to return to the main screen, touch [main screen]..
Page 30: Using Copy
2 using copy functions.
Page 31: Using Copy Functions
Océ cm3522/cm2522 2-2 using copy functions 2 2 using copy functions 2.1 general copy operation 2 note for details on the copy operation, refer to the user’s guide [copy operations]. This section contains information on the general operation for making copies. 1 press the [copy] key in the control pa...
Page 32
Océ cm3522/cm2522 2-3 using copy functions 2 – for details on selecting the original image quality, refer to page 2-23 . – for details on selecting a copy density setting, refer to page 2-26 . – to cancel the setting and select the default, press the [reset] key. 4 using the keypad, type in the desi...
Page 33: 2.2
Océ cm3522/cm2522 2-4 using copy functions 2 2.2 selecting a color setting when making copies, a printing color can be selected. The following color settings are available. Follow the procedure described below to select the color setting. 1 in the basic screen, touch [color]. The color screen appear...
Page 34
Océ cm3522/cm2522 2-5 using copy functions 2 2 select the desired color setting. – to return to the main screen, touch [main screen]. – if the "2 color" setting was selected, touch the button for the desired color, and then touch [ok]. 3 touch [ok]. The basic screen appears again..
Page 35: 2.3
Océ cm3522/cm2522 2-6 using copy functions 2 2.3 selecting the paper settings the paper size can be selected automatically according to the original size or it can be specified manually. Specify the paper size according to the corresponding procedure, depending on the desired copy settings. 2.3.1 au...
Page 36
Océ cm3522/cm2522 2-7 using copy functions 2 2 touch [auto]. – to return to the main screen, touch [main screen]. 3 touch [ok]. The basic screen appears again..
Page 37: 2.3.2
Océ cm3522/cm2522 2-8 using copy functions 2 2.3.2 manually selecting the desired paper size the paper tray loaded with paper of the desired size can be selected manually. By also selecting the auto zoom setting, the most appropriate zoom ratio is selected based on the size of the loaded original an...
Page 38: 2.4
Océ cm3522/cm2522 2-9 using copy functions 2 2.4 specifying a zoom setting the zoom ratio can be set in order to make a copy on paper with a size different than the original or to enlarge or reduce the size of the copy image. The zoom ratio can be specified in any of the following ways. *1 the "auto...
Page 39: 2.4.1
Océ cm3522/cm2522 2-10 using copy functions 2 2.4.1 selecting a zoom ratio 1 in the basic screen, touch [zoom]. The zoom screen appears. 2 touch the button for the desired zoom ratio. – to return to the main screen, touch [main screen]. – if "enlarge", "reduce" or "set zoom ratio" was selected, sele...
Page 40: 2.5
Océ cm3522/cm2522 2-11 using copy functions 2 2.5 selecting original and copy settings the type of original and copy can be specified. The following original and copy settings are available. *1 if "1 > 2" or "2 > 2" is selected, specify the binding margin position for the copy and the orientation of...
Page 41: 2.5.1
Océ cm3522/cm2522 2-12 using copy functions 2 2.5.1 selecting single-sided or double-sided copies 1 in the basic screen, touch [duplex/combine]. The duplex/combine screen appears. 2 touch [original > copy]. – to return to the main screen, touch [main screen]. The duplex settings screen appears..
Page 42
Océ cm3522/cm2522 2-13 using copy functions 2 3 touch the button for the desired settings, and then touch [ok]. – if "1 > 2" or "2 > 2" is selected, touch [output bind direction], select the binding position for the copy, and then touch [ok]. – if "auto" is selected, the binding margin is set at the...
Page 43: 2.6
Océ cm3522/cm2522 2-14 using copy functions 2 2.6 selecting a combined copy setting two original images can be combined and printed on a single page, reducing paper use. 1 in the basic screen, touch [duplex/combine]. The duplex/combine screen appears. 2 touch [combine]. – to return to the main scree...
Page 44
Océ cm3522/cm2522 2-15 using copy functions 2 3 touch [2in1], and then touch [ok]. 4 touch [close]. The basic screen appears again..
Page 45: 2.7
Océ cm3522/cm2522 2-16 using copy functions 2 2.7 selecting finishing settings various settings can be selected for sorting and finishing copies fed into the output tray. The following finishing settings are available. *1 if no finisher or separator is installed and all of the following conditions a...
Page 46: 2.7.1
Océ cm3522/cm2522 2-17 using copy functions 2 *5 the half-fold and center staple settings are available only if the saddle stitcher is installed on optional finisher 9356. *6 the center staple & fold settings are available if the saddle stitcher is installed on optional finisher 9356 or optional fin...
Page 47: 2.7.2
Océ cm3522/cm2522 2-18 using copy functions 2 2.7.2 selecting staple/punch settings 1 in the basic screen, touch [finishing]. 2 touch [staple/punch]. – to return to the main screen, touch [main screen]. The staple/punch screen appears..
Page 48
Océ cm3522/cm2522 2-19 using copy functions 2 3 touch the button for the desired settings, and then touch [position setting]. 4 select the desired position. – touch [auto] to automatically determine the stapling or hole-punching position according to the orientation of the loaded original. The paper...
Page 49: 2.7.3
Océ cm3522/cm2522 2-20 using copy functions 2 2.7.3 selecting a folding or binding setting 1 in the basic screen, touch [finishing]. 2 touch [center staple/fold] or [center staple & fold]. – to return to the main screen, touch [main screen]. A screen appears, allowing folding or binding settings to ...
Page 50
Océ cm3522/cm2522 2-21 using copy functions 2 3 select the desired settings. – when finisher 9355 is installed, touch the button for the desired center erase setting. To erase the area along the center, touch [erase]. To not erase the area along the center, touch [none]. – to cancel the setting, tou...
Page 51: 2.8
Océ cm3522/cm2522 2-22 using copy functions 2 2.8 selecting not to rotate the image copies can be printed with the image not rotated to fit the orientation of the loaded paper. 2 note depending on the paper size and zoom ratio, some parts of the image may be lost. Follow the procedure described belo...
Page 52: 2.9
Océ cm3522/cm2522 2-23 using copy functions 2 2.9 selecting the quality of the original select an original quality setting. Select the setting for the original type to better adjust the copy quality. The following original type settings are available. If "text/photo" or "photo" is selected, the phot...
Page 53
Océ cm3522/cm2522 2-24 using copy functions 2 2 touch the original/density tab. The original/density screen appears. 3 touch [original type]. The original type screen appears. 4 touch the button for the quality setting most appropriate for the loaded original..
Page 54
Océ cm3522/cm2522 2-25 using copy functions 2 – if "text/photo" or "photo" is selected, select the photo type, and then touch [ok]. – to return to the main screen, touch [main screen]. 5 touch [ok]. The original/density screen appears again..
Page 55
Océ cm3522/cm2522 2-26 using copy functions 2 2.10 selecting the density settings the copy density and the background density can be adjusted according to the original. The following density adjustments are available. Follow the procedures described below to select the density settings. 2.10.1 adjus...
Page 56: Settings)
Océ cm3522/cm2522 2-27 using copy functions 2 3 select the desired density setting. – each time [light] or [dark] is touched, the density is lightened or darkened by one level. – to select the center setting (default setting), touch [standard]. – to return to the main screen, touch [main screen]. 4 ...
Page 57
Océ cm3522/cm2522 2-28 using copy functions 2 2 touch [background removal]. The background removal screen appears. 3 select the desired background removal setting. – each time [light] or [dark] is touched, the density is lightened or darkened by one level. – to select the third setting from the righ...
Page 58
Océ cm3522/cm2522 2-29 using copy functions 2 2.11 selecting the paper settings 2.11.1 selecting a paper type setting if paper other than plain paper, such as ohp transparencies or special paper, is loaded in a paper tray, be sure to change the paper type setting for that tray. The following procedu...
Page 59
Océ cm3522/cm2522 2-30 using copy functions 2 2 touch the button for the bypass tray, and then touch [change settings]. – to return to the main screen, touch [main screen]. – to specify a special paper for any paper tray other than the bypass tray, touch the button for the corresponding paper tray. ...
Page 60
Océ cm3522/cm2522 2-31 using copy functions 2 4 select the appropriate setting for the type of special paper that is loaded. Touch the button for the desired paper type. – to print on letterheads, colored paper or envelopes, touch [ ↓] or [↑]. 5 touch [ok], and then touch [ok] in the next two screen...
Page 61
Océ cm3522/cm2522 2-32 using copy functions 2 2.11.2 printing double-sided copies manually the "duplex 2nd side" setting is used to print double-sided copies on paper that cannot be fed through the automatic duplex unit. The paper to be used for printing the duplex second side can be loaded into the...
Page 62
Océ cm3522/cm2522 2-33 using copy functions 2 3 touch [paper type]. 4 select the type of paper to be loaded and touch [duplex 2nd side]. 5 touch [ok], and then touch [ok] in the next two screens that appear. Otherwise, touch [main screen]. The basic screen appears again..
Page 63
Océ cm3522/cm2522 2-34 using copy functions 2 2.11.3 selecting a paper size setting the paper size can be set for the paper tray so that it can be used with the specified paper size. 2 note for details on loading paper, refer to the user’s guide [copy operations]. The paper size can be selected for ...
Page 64
Océ cm3522/cm2522 2-35 using copy functions 2 1 in the basic screen, touch [paper]. The paper screen appears. 2 touch the button for the bypass tray, and then touch [change settings]. – to return to the main screen, touch [main screen]. – to change the setting of special paper for any paper tray oth...
Page 65
Océ cm3522/cm2522 2-36 using copy functions 2 3 touch [paper size]. 4 touch either [auto detect] or select the desired paper size. – if a button other than [auto detect] was touched, select the desired paper size, and then touch [ok]. 5 touch [ok], and then touch [ok] in the next two screens that ap...
Page 66
Océ cm3522/cm2522 2-37 using copy functions 2 2.12 scanning the next original to be copied while a copy job is being printed (next job reservation) the settings for the next copy job can be specified and the original can be scanned while a job is being printed so that it can be printed once the curr...
Page 67
Océ cm3522/cm2522 2-38 using copy functions 2 2.13 pausing scanning/printing follow the procedure described below to temporarily stop scanning the original and stop the printing operation. 1 press the [stop] key while an original is being scanned or a job is being printed. – scanning/printing tempor...
Page 68
Océ cm3522/cm2522 2-39 using copy functions 2 2.14 printing a proof to check the settings (proof copy) before printing a large number of copies, a single proof copy can first be printed so that it can be checked. This prevents copy errors from occurring. 2 note when printing a proof copy, specify mu...
Page 69
Océ cm3522/cm2522 2-40 using copy functions 2 5 touch [print]. The remaining copies are queued as a copy job..
Page 70: Using Fax/scan
3 using fax/scan functions.
Page 71: Using Fax/scan Functions
Océ cm3522/cm2522 3-2 using fax/scan functions 3 3 using fax/scan functions 3.1 general fax/scan operation 2 note for details on performing fax and scan operations, refer to the user’s guide [network scan/fax/network fax operations]. ! Detail specify the fax settings and network settings and registe...
Page 72
Océ cm3522/cm2522 3-3 using fax/scan functions 3 – to erase the entered destination, press the [c] (clear) key. 4 specify the necessary scanning settings. – for details on specifying scanning settings, refer to page 3-13 . – to cancel the setting and select the default, press the [reset] key. 5 pres...
Page 73: 3.2
Océ cm3522/cm2522 3-4 using fax/scan functions 3 3.2 specifying a destination ! Detail destinations must first be registered in utility mode. Fax transmission destinations can also be registered. For details on registering destinations, refer to the user’s guide [network scan/fax/network fax operati...
Page 74: 3.2.1
Océ cm3522/cm2522 3-5 using fax/scan functions 3 ! Detail multiple destinations can be specified at the same time. To send or receive faxes manually, touch [off-hook]. When this button is touched, the dial tone can be heard from the speaker. For more details, refer to the user’s guide [network scan/...
Page 75
Océ cm3522/cm2522 3-6 using fax/scan functions 3 2 touch the button for the desired destination type. – to select the index characters, touch [next →]. – to select a destination from registered group, touch [group]. To select all destinations registered with the selected group, touch [select all] in...
Page 76: 3.2.2
Océ cm3522/cm2522 3-7 using fax/scan functions 3 3 touch the button for the desired destination, and then touch [ok]. – to cancel a selection, touch the button for a selected destination again. 4 touch [close]. 3.2.2 selecting a destination from the job log follow the procedure described below to se...
Page 77: 3.2.3
Océ cm3522/cm2522 3-8 using fax/scan functions 3 3.2.3 selecting a destination with an ldap search follow the procedure described below to search for an e-mail address registered with the ldap server and select the destination. ! Detail in order to perform an ldap search, ldap must be enabled and an...
Page 78
Océ cm3522/cm2522 3-9 using fax/scan functions 3 2 select the search method. – to specify a search word, touch [search]. To specify multiple search conditions, touch [advanced search]. – when there is only one ldap server – when there are multiple ldap servers – authentication may be necessary, depe...
Page 79: 3.2.4
Océ cm3522/cm2522 3-10 using fax/scan functions 3 for an advanced search the search results are displayed. 4 touch the button for the desired destination, and then touch [ok]. – to cancel a selection, touch the button for a selected destination again. 3.2.4 directly typing in the number follow the p...
Page 80
Océ cm3522/cm2522 3-11 using fax/scan functions 3 2 using the control panel keypad or the keypad that appears in the touch panel, type in the fax number. – otherwise, touch [enter registered no.], use the keypad to type in destination registration number, and then touch [apply]. – to specify an addi...
Page 81
Océ cm3522/cm2522 3-12 using fax/scan functions 3 3 touch [ok]. – if a destination registration number is entered, touch [ok], and then touch [ok] in the next screen that appears..
Page 82: 3.3
Océ cm3522/cm2522 3-13 using fax/scan functions 3 3.3 specifying scanning settings (scan settings) touch [scan settings] in the fax/scan mode screen, and then specify the original scanning settings. 3.3.1 simplex/duplex select the appropriate adf scanning method according to your original. The follo...
Page 83
Océ cm3522/cm2522 3-14 using fax/scan functions 3 2 touch [simplex/duplex]. – to return to the address book screen, touch [main screen]. The simplex/duplex screen appears. 3 select the scanning method. 4 touch [ok], and then touch [ok] in the next screen that appears. Otherwise, touch [main screen]..
Page 84: 3.3.2
Océ cm3522/cm2522 3-15 using fax/scan functions 3 3.3.2 original type select the appropriate original type setting according to your original. The following original type settings are available. If "text/photo" or "photo" is selected, the photo type can also be selected. 1 touch [scan settings] in t...
Page 85
Océ cm3522/cm2522 3-16 using fax/scan functions 3 2 touch [original type]. – to return to the address book screen, touch [main screen]. The original type screen appears. 3 touch the button for the quality setting most appropriate for the loaded original. – if "text/photo" or "photo" is selected, sel...
Page 86: 3.3.3
Océ cm3522/cm2522 3-17 using fax/scan functions 3 4 touch [ok], and then touch [ok] in the next screen that appears. Otherwise, touch [main screen]. 3.3.3 resolution select the detailedness for scanning originals. The following resolution settings are available. 1 touch [scan settings] in the fax/sc...
Page 87
Océ cm3522/cm2522 3-18 using fax/scan functions 3 2 touch [resolution]. – to return to the address book screen, touch [main screen]. The resolution screen appears. 3 select the resolution. – a more finely scanned original has more information to be sent, therefore, the transmission time increases. –...
Page 88: 3.3.4
Océ cm3522/cm2522 3-19 using fax/scan functions 3 3.3.4 density select the appropriate density setting according to your original. The density can be adjusted to one of nine levels. 1 touch [scan settings] in the fax/scan mode screen. The scan settings screen appears. 2 touch [density]. – to return ...
Page 89: 3.3.5
Océ cm3522/cm2522 3-20 using fax/scan functions 3 3 select the desired density setting. – each time [light] or [dark] is touched, the density is lightened or darkened by one level. – to select the center setting (default setting), touch [std.]. 4 touch [ok], and then touch [ok] in the next screen th...
Page 90
Océ cm3522/cm2522 3-21 using fax/scan functions 3 1 touch [scan settings] in the fax/scan mode screen. The scan settings screen appears. 2 touch [file type]. – to return to the address book screen, touch [main screen]. The file type screen appears. 3 select the file format and the page setting..
Page 91: 3.3.6
Océ cm3522/cm2522 3-22 using fax/scan functions 3 – if "single page" is selected under "scan setting", a file is created in a format where the data for each page can be saved when downloading. – if "multi page" is selected under "scan setting", a single file is created from the entire scanned origin...
Page 92
Océ cm3522/cm2522 3-23 using fax/scan functions 3 the scan settings screen appears. 2 touch [image adjust]. – to return to the address book screen, touch [main screen]. The image adjust screen appears. 3 select the color type. 4 touch [ok], and then touch [ok] in the next screen that appears. Otherw...
Page 93: 3.3.7
Océ cm3522/cm2522 3-24 using fax/scan functions 3 3.3.7 background removal (image adjust) the scanning density of the original background can be adjusted. When originals printed on colored paper are scanned in color, the background may become black. In that case, the density of the background can be...
Page 94
Océ cm3522/cm2522 3-25 using fax/scan functions 3 3 touch [background removal]. The background removal screen appears. 4 adjust the density as desired. – each time [light] or [dark] is touched, the density is lightened or darkened by one level. – to select the third setting from the right (default s...
Page 95: 3.3.8
Océ cm3522/cm2522 3-26 using fax/scan functions 3 3.3.8 scan size specify the size of paper to be scanned. The scan size can be specified with any of the following methods. 1 touch [scan settings] in the fax/scan mode screen. The scan settings screen appears. 2 touch [scan size]. – to return to the ...
Page 96: 3.3.9
Océ cm3522/cm2522 3-27 using fax/scan functions 3 3 select the desired size and orientation. – if a button other than [auto] was touched, select the desired paper size, and then touch [ok]. 4 touch [ok], and then touch [ok] in the next screen that appears. Otherwise, touch [main screen]. 3.3.9 origi...
Page 97
Océ cm3522/cm2522 3-28 using fax/scan functions 3 2 note [original direction] is not available with fax function. 1 touch [scan settings] in the fax/scan mode screen. The scan settings screen appears. 2 touch [original settings]. – to return to the address book screen, touch [main screen]. The origi...
Page 98
Océ cm3522/cm2522 3-29 using fax/scan functions 3 3 select the original settings. – touching [original direction] displays the original direction screen. Touch the button for the desired orientation, and then touch [ok]. – touching [binding position] displays the binding position screen. Touch the b...
Page 99: 3.4
Océ cm3522/cm2522 3-30 using fax/scan functions 3 3.4 using a program "program" refers to the set of destinations and scan settings that are registered together. These are convenient for frequently sending transmissions with the same settings. The following procedure describes how to send data by se...
Page 100
Océ cm3522/cm2522 3-31 using fax/scan functions 3 – to cancel the setting, touch the button again to deselect it. – only one program can be selected. 3 touch [ok] or [main screen]. – to specify multiple destinations, add a destination. For details, refer to "specifying a destination" on page 3-4 ..
Page 101: 3.5
Océ cm3522/cm2522 3-32 using fax/scan functions 3 3.5 checking the destinations the specified destinations can be checked. In addition, destinations can be removed or their information can be checked. 1 in the fax/scan mode screen, touch [dest. Settings]. The destination settings screen appears, and...
Page 102
Océ cm3522/cm2522 3-33 using fax/scan functions 3 3 touch [details], and then check the destination details. – to delete a destination, select a destination, and then touch [delete] to display a message requesting confirmation to delete the destination. 4 touch [close]..
Page 103
Océ cm3522/cm2522 3-34 using fax/scan functions 3.
Page 104: Logging On and
4 logging on and logging off.
Page 105: Logging On and Logging Off
Océ cm3522/cm2522 4-2 logging on and logging off 4 4 logging on and logging off 4.1 when a logon screen appears 2 note for details, refer to the user’s guide [copy operations]. 4.1.1 when the screen to enter the user name appears if the message "enter user name and password, and then touch [login] o...
Page 106
Océ cm3522/cm2522 4-3 logging on and logging off 4 – if the authentication unit (ic card type) has been installed, place the ic card on the authentication unit (ic card type) to complete authentication and display the basic screen. For details on performing authentication using the authentication un...
Page 107
Océ cm3522/cm2522 4-4 logging on and logging off 4 3 touch [password]. 4 using the control panel keypad or the keyboard that appears in the touch panel, type in the password, and then touch [ok]. – to return to the main screen without changing the settings, touch [cancel]. 5 touch [login] or press t...
Page 108: 4.1.2
Océ cm3522/cm2522 4-5 logging on and logging off 4 6 when you are finished performing the desired operations, press the [access] key. A message appears, requesting confirmation to log off. 7 touch [yes], and then touch [ok]. The main screen appears again. 4.1.2 when the screen to enter the account n...
Page 109
Océ cm3522/cm2522 4-6 logging on and logging off 4 1 touch [account name]. – the screen that appears differs depending on the authentication method settings in the administrator settings. 2 using the control panel keypad or the keyboard that appears in the touch panel, type in the account name, and ...
Page 110
Océ cm3522/cm2522 4-7 logging on and logging off 4 3 touch [password]. 4 using the control panel keypad or the keyboard that appears in the touch panel, type in the password, and then touch [ok]. – to return to the main screen without changing the settings, touch [cancel]. 5 touch [login] or press t...
Page 111
Océ cm3522/cm2522 4-8 logging on and logging off 4 6 when you are finished performing the desired operations, press the [access] key. A message appears, requesting confirmation to log off. 7 touch [yes], and then touch [ok]. – the original screen appears again. The screen that appears differs depend...
Page 112: Printing For
Printing for professionals beyond the ordinary océ north america document printing systems 100 oakview drive trumbull, ct 06611 www.Oce.Com copyright 2008, océ imagistics inc. All rights reserved.