Oce cm3521 User Manual - page 195
7
Setting up the PPD driver (Windows)
7-2
cm3521
Graphics tab
Device Options tab
To specify the following printer-specific options, right-click the printer icon in
the Printers window, and then click “Properties” in the menu that appeared.
Item
Function
Resolution
Specifies the print resolution.
Color Control
Specifies whether to adjust the color to that on the screen.
Halftoning
Specifies the halftone number of lines and the pattern angle.
Special
Prints a negative or mirror image.
Scaling
Specifies the enlargement and reduction ratio.
Item
Function
Collated
Specifies whether to print multiple copies in sets.
Offset
When printing multiple copies, shifts the output position of each set.
Binding Position
Specifies the binding position.
Duplex
Specifies duplex printing.
Combination
Specifies booklet printing.
Staple
Performs stapling.
Hole Punch
Performs hole punching.
Fold & Staple
Performs folding.
Front Cover Page
Attaches a front cover page.
Paper Tray
(Front Cover Page)
Selects the input tray for the front cover.
Back Cover Page
Attaches a back cover page.
Paper Tray
(Back Cover Page)
Selects the input tray for the back cover.
Transparency Interleave
Inserts interleaves between overhead projector transparencies.
Paper Tray (Transparen-
cy Interleave)
Selects the input tray for the transparency interleaves.
Wait Mode
Stops printing temporarily after part of the document has been print-
ed so that the proof print can be checked.
Select Color
Specifies whether to print in color or grayscale.
Glossy Mode
Prints using a gloss finish.
Original Image Type
Prints with a quality suitable for the original document.
Color Matching (Text)
Adjusts the color quality of the text in a document.
Pure Black (Text)
Specifies whether to enable grayscale of the text in a document.
Screen (Text)
Specifies screening of the text in a document.