Oce cm3521 User Manual - 1.3
1
Before using the scan functions
1-8
cm3521
Be
fo
re
u
s
in
g t
he sca
n
f
unct
ion
s
Chapter 1
1.3
Settings for using network/scanning functions
It is recommended that the settings described below be specified before us-
ing the network/scanning functions. The network settings described in
“Specifying Network Settings” must be specified first. Set other items as
necessary.
!
Detail
For details on specifying network settings, refer to the chapters listed be-
low.
“TCP/IP settings” on page 3-47
“E-Mail TX (SMTP) settings” on page 3-87
“4 Specifying settings using Web Connection”
Specifying network settings
An IP address must be assigned to the machine and settings such as the
SMTP server must be specified to use the machine on the network. Be sure
to set them.
There are two methods for specifying settings. One method is to specify the
settings from the touch panel of this machine. The other method is to use
Web Connection from a Web browser on a computer on the network.
Registering destinations and specifying their settings
The destinations (recipients) of scanned data must be registered.
The following registration methods are available.
-
Register from the touch panel of the machine.
-
Use Web Connection from a computer on the network.
The following types of destinations can be registered.
2
Note
The destination can also be entered before scanning. This is called “di-
rect input”. For details, refer to “Entering the addresses directly” on
page 2-16.
Type
Description
Abbreviated Destination
The destination can be selected with one button.
Group
Multiple destinations can be registered in groups. E-mail, FTP,
SMB, and box destinations can be registered together in a single
group.