Oce ColorWave 600 User Manual - page 8
Power plug
Caution
■
For machines that are connected via a fixed connection to the electricity grid: The
disconnect device in the fixed connection must be easily accessible.
Grounding
Caution
■
Connect the power cord to an electrical outlet (wall socket) that is equipped with a
grounding terminal.
■
This equipment has not been designed for connection to an IT power system. An IT
power system is a voltage network in which the neutral wire is not connected to ground.
■
In particular for Finland (FI), Norway (NO) and Sweden (SE), according to National
Deviations to EN/IEC 60950-1.
#
Laite on liitetävä suojamaadoituskoskettimilla varustettuun pistorasiaan
FI
Apparatet må tilkoples jordet stikkontakt
NO
Apperaten skall anslutas till jordat uttag
SE
[1] Figure: 1. The power connection at the back of the printer.
Installation
Caution
■
Make sure that the machine is placed on a level, horizontal surface of sufficient strength.
■
Do not place this machine on an unstable or tilted bench.
■
Do not place this machine in a location that is subject to lots of vibrations and shocks.
■
Do not use flammable sprays, liquids or gases near this product, because this could
cause a fire.
■
Make sure that the stabilizing studs are placed correctly after installing or moving the
machine.
Chapter 1 - Instructions for safe use
8
Instructions for safe use