- DL manuals
- Oce
- Printer
- ColorWave 600
- User Manual
Oce ColorWave 600 User Manual - Océ License Logic
283
Océ License Logic
Océ License Logic
Introduction
When you navigate to the 'Support' - 'Licenses' tab in the Océ Express WebTools,
you get access to the Océ License Logic application. Before you can work with
licenses, you must access the home page of the Océ. The following workflow
describes per step when to use which possibility.
Overview OcéLicense Logic functionality
[120]
Function
Description
View the current active licenses.
You can make a list of new options you need
and make a list of license numbers. Océ
needs the list of new options and the license
numbers to create a new license file.
Get the host id of the Océ system.
Océ needs the host id of your Océ system to
create a new license file.
Send the list of new options you need, the list
of license numbers and the host id to Océ.
Océ creates and delivers one or more new
license files.
Create a back-up of the current active
licenses if necessary.
Save the current active licenses to do so.
Activate the licenses.
Perform a license activation job to do so.
The license activation job guides you
through the following steps.
■
1. Locate the license file
■
2. Preview the new active licenses
■
3. Accept the end user license agreement
■
4. Finish the license activation job
■
5. Restart the controller of the Océ
system.
Note:
Perform the license
activation job for each license
file.
Summary of ColorWave 600
Page 1
Océ colorwave ™ 600 océ user manual operating information.
Page 2: Océ-Technologies B.V.
Edition 2007-11 us océ-technologies b.V. Océ-technologies b.V. Copyright © 2007, océ-technologies b.V. Venlo, the netherlands. All rights reserved. No part of this work may be reproduced, copied, adapted, or transmitted in any form or by any means without written permission from océ. Océ-technologie...
Page 3: Trademarks
3 trademarks trademarks océ, océ colorwave ™ 600 and the océ express webtools are registered trademarks of océ-technologies b.V. Adobe ® and postscript ® 3 ™ are registered trademarks of adobe ® systems incorporated. Macintosh ® is a registered trademark of apple ® computer, inc. Microsoft ® , windo...
Page 4
4 trademarks.
Page 5: Contents
5 contents contents chapter 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 notes for the reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 how to use this manual . . . . . . . . ....
Page 6
6 contents complete the printer configuration in the océ express webtools . . . . . 73 configure the regional settings of the océ colorwave ™ 600 . . . . . . . . . . 77 print the customer acceptance test (cat) demo print . . . . . . . . . . . . . 78 chapter 4 configure the printing system . . . . . ...
Page 7
7 contents unpack the media roll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 load a media roll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 define the media type and the core size . . . . . . . . . . . . . . . . . . . 134 the output delivery...
Page 8
8 contents replace a media roll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 the 'media drawer' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 remove a media roll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 9
9 contents print examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253 your océ print quality advisor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253 2d cad monochrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 10
10 contents appendix c addresses of local océ organizations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311 addresses of local océ organizations . . . . . . . . . . . . . . . . . . . . . . . . . . 312.
Page 11: Chapter 1
11 chapter 1 introduction.
Page 12: Notes For The Reader
12 chapter 1 introduction notes for the reader notes for the reader introduction this manual helps you to use the océ colorwave ™ 600. The manual contains a description of the product and guidelines to use and operate the océ colorwave ™ 600. Definition attention getters parts of this manual require...
Page 13
13 notes for the reader [1] safety information the safety information for this product is included in a separate manual with the title safety information. This manual is part of the documentation set that you received with your product. [1] overview of the attention getters word icon indicates note ...
Page 14: How to Use This Manual
14 chapter 1 introduction how to use this manual how to use this manual introduction you can access a topic quickly with the following methods. ■ refer to the alphabetical index at the end of the manual. ■ refer to the table of contents at the beginning of this manual. Before you turn to the complet...
Page 15
15 how to use this manual 7 print quality and print productivity ■ settings that influence the print quality / print productivity. ■ color management settings. ■ print examples. ■ check, analyze and solve output quality problems of print jobs. 8 license management manage licenses. Appendix a specifi...
Page 16: Available Documentation
16 chapter 1 introduction available documentation available documentation introduction this manual is part of a complete documentation set. The following table shows a complete overview of the available documentation. Available documentation [3] note: visit océ on the internet at www.Oce.Com for the...
Page 17: Chapter 2
17 chapter 2 get to know the printing system.
Page 18: The Océ Colorwave
18 chapter 2 get to know the printing system the océ colorwave ™ 600 printing system the océ colorwave ™ 600 printing system introduction the océ colorwave ™ 600 is the first wide format tonerpearl printer in the world and consequently also the first of a new family of color wide format printers tha...
Page 19
19 the océ colorwave ™ 600 printing system illustration [9] the main components of the océ colorwave ™ 600 printing system [4] component description / function the 'océ colorwave ™ 600 printer' creates the printed output. The 'océ express webtools' the 'océ express webtools' provide multiple users a...
Page 20: The Océ Colorwave
20 chapter 2 get to know the printing system the océ colorwave ™ 600 printing system consumables the océ colorwave ™ 600 printing system consumables [5] consumable consumable part description 'media' 'roll' roll that caries the media. A roll can have a 2" core or a 3" core. 'core' the core of the me...
Page 21: The Océ Colorwave
21 printer working area [footprint] the océ colorwave ™ 600 printer printer working area [footprint] the océ colorwave ™ 600 requires a floor space / working area of at least 3100 mm x 2270 mm (122 inch x 90 inch). [10].
Page 22
22 chapter 2 get to know the printing system the printer hardware components (front) the printer hardware components (front) illustration [11] component - function table [6] 16 2 9 6 4 3 14 12 11 10 13 19 1 7 5 8 17 18 20 21 15 nr component description / function 1 'lower left cover' 2 'media drawer...
Page 23
23 the printer hardware components (front) 9 'toner cartridge' (cyan) toner cassette for cyan 'océ tonerpearls ™ ' 10 'toner cartridge' (yellow) toner cassette for yellow 'océ tonerpearls ™ ' 11 'toner cartridge' (black) toner cassette for black 'océ tonerpearls ™ ' 12 'toner cartridge' (magenta) to...
Page 24
24 chapter 2 get to know the printing system the printer hardware components (back) the printer hardware components (back) illustration [12] component - function table [7] 11 1 9 7 4 2 3 8 6 5 13 12 10 nr component description / function 1 'wheel' 2 'left cover of the media drawer' 3 'back cover of ...
Page 25
25 the printer hardware components (back) 8 'top back left cover' 9 'top back cover' used for error recovery. Note: it is possible to install an optional 'receiving rack (basket)' or a folder. Note: if you select 'external output (back)', the printed output is lead through the slot below the 'top ba...
Page 26: The 'Media Drawer'
26 chapter 2 get to know the printing system the 'media drawer' the 'media drawer' illustration [13] component - function table attention: only use intact media rolls. Dented media rolls can damage the 'imaging devices'. [8] number component description / function 1 'roll' 1 media roll 3 or 5 in oth...
Page 27
27 the 'media drawer' 4 'roll loading station' groove integrated behind the front cover of the media drawer. To load new media on the printer, the operator must proceed as follows ■ place the new media roll temporarily on the roll loading station ■ insert the roll holder into the new media roll ■ pl...
Page 28: The 'Imaging Section'
28 chapter 2 get to know the printing system the 'imaging section' the 'imaging section' illustration [14] [14] when you open the 'top cover' you get access to the 'imaging section'. Component - function table [9] nr component description / function 1 'print surface' the print surface is designed to...
Page 29: The Printer Operator Panel
29 the hardware of the printer operator panel the printer operator panel the hardware of the printer operator panel illustration [15] component - function table [10] nr component description / function 1 'numeric keys' keys with the numeric values 0-9 in the lower part of the 'printer operator panel...
Page 30
30 chapter 2 get to know the printing system the hardware of the printer operator panel 4 'status light' the status light indicates the status of the printer. ■ a green light indicates that the printer is ready. ■ a blinking green light indicates that the printer is busy. ■ a red light can indicate ...
Page 31
31 the hardware of the printer operator panel 1 functionality not available in v 1.0. 10 'green start key' the green key on the printer operator panel that allows the operator to start a print job from the 'queue' or 'mailbox' 1 . 11 'red stop key' the red key on the 'printer operator panel' that al...
Page 32
32 chapter 2 get to know the printing system the main screens on the printer operator panel the main screens on the printer operator panel [11] screen function screen dump 'home' basic screen that displays only the most relevant information: the condition of the system and what it is doing now. Task...
Page 33
33 the main screens on the printer operator panel 'queue' monitor and control the progress of print jobs. Tasks (performed by 'any user'): ■ monitor print jobs - what is the progress (= the 'queue' pane). ■ solve problems with jobs - media requests. ■ pause and resume print jobs. Note: the 'queue' s...
Page 34
34 chapter 2 get to know the printing system the main screens on the printer operator panel 1 functionality not available in v 1.0. 'maintenance' maintenance and troubleshooting tasks. Tasks (performed by 'any user', but most likely by the 'key operator') to solve problems with the printer: ■ 'calib...
Page 35: The Finishing Options
35 the finishing options the finishing options introduction the océ colorwave ™ 600 is delivered with a 'top delivery tray' to collect your printed output. [22] the 'top delivery tray' can collect 50 - 100 a0 plain paper prints with a maximum length of 48" [120mm]. Note: the media type you use influ...
Page 36
36 chapter 2 get to know the printing system the finishing options the finishing options [12] [13] 'receiving rack (basket)' illustration the 'receiving rack (basket)' is hooked at the rear side of the printer. It can collect 2 - 5 prints. The 'receiving rack (basket)' bends the printed output. Not ...
Page 37: Chapter 3
37 chapter 3 prepare the printing system for use and get started.
Page 38: Introduction
38 chapter 3 prepare the printing system for use and get started introduction introduction this chapter contains all the information you need to prepare your océ colorwave ™ 600 for use. You can learn more about the following. ■ how to move the printer. ■ how to connect the power supply cable and th...
Page 39: 600 Printer
39 how to move the océ colorwave ™ 600 printer how to move the océ colorwave ™ 600 printer introduction [25] attention: if connected you must first switch off and disconnect the océ colorwave ™ 600. Switch on or switch off the printer on page 149 . Attention: close the media drawers. Note: be aware ...
Page 40
40 chapter 3 prepare the printing system for use and get started how to move the océ colorwave ™ 600 printer step action remarks 1 use both hands to pull at the 'lower left cover'. Remove the 'lower left cover'. [26] 2 pull at the foot cover. Remove the 'foot' cover. [27] 3 push the handle [1]. The ...
Page 41
41 how to move the océ colorwave ™ 600 printer 5 move the océ colorwave ™ 600 printer. Note: be aware of the printer working area. [29] 6 pull out the left 'foot' [1] until it touches the ground and locks [2]. You should hear a click as it locks. Note: if you do not hear a click place your foot on t...
Page 42
42 chapter 3 prepare the printing system for use and get started how to move the océ colorwave ™ 600 printer 7 replace the 'foot' covers. Place the pin into the notch. [31] [31] pin [32] [32] notch [33] step action remarks.
Page 43
43 how to move the océ colorwave ™ 600 printer 8 replace the 'lower left cover'. Place the pin into the notch. [34] [34] pin [35] [35] notch [36] 9 repeat action 6 till 8 at the right hand side. Replace the 'lower right cover' step action remarks.
Page 44: Connect The Océ Colorwave
44 chapter 3 prepare the printing system for use and get started how to connect the network cable connect the océ colorwave ™ 600 printer how to connect the network cable [15] step action remarks 1 remove the cover of the 'connection panel' at the rear side of the printer. [37] 2 lead the connection...
Page 45
45 how to connect the network cable 3 connect one side of the data cable (utp cable with a rj45 connector) to the indicated network connection on the connection panel of the 'océ powerm controller'. Connect the other side of the network cable to your company network. [39] 4 replace the cover of the ...
Page 46
46 chapter 3 prepare the printing system for use and get started how to connect the mains supply cable how to connect the mains supply cable [16] step action remarks 1 plug in the 'power' cable at the power connection on the 'connection panel' at the back of the printer. Note: make sure the main pow...
Page 47: How to Switch On The Printer
47 how to switch on the printer how to switch on the printer [17] step action 1 switch on the green main switch at the rear side of the océ colorwave ™ 600. [42] 2 switch on the océ colorwave ™ 600 at the front side of the printer. 'on / off switch' [19] [43] 19.
Page 48: The Installation Procedure
48 chapter 3 prepare the printing system for use and get started introduction the installation procedure introduction to install the printer and integrate the océ colorwave ™ 600 system in your company network you must follow four main steps. ■ run the installation wizard from the printer operator p...
Page 49
49 run the installation wizard from the printer operator panel run the installation wizard from the printer operator panel introduction if you integrate the printer according to a network policy, please contact your network administrator to get information about the network infrastructure and parame...
Page 50
50 chapter 3 prepare the printing system for use and get started run the installation wizard from the printer operator panel how to run the installation wizard [18] step action remarks 1 if you connect the network cable to your company network and you switch on your océ colorwave ™ 600 for the first...
Page 51
51 run the installation wizard from the printer operator panel 5 the printer operator panel displays the number of rolls detected. Use the 'upper right softkey' to go to the next step. [49] 6 use the 'scroll wheel' to select 'yes' when asked if you want to configure the network settings now. Confirm...
Page 52
52 chapter 3 prepare the printing system for use and get started run the installation wizard from the printer operator panel 8 select one of the following options. ■ 'auto detect' use the 'scroll wheel' to select 'auto detect' if the system must automatically detect your network settings. Confirm yo...
Page 53
53 run the installation wizard from the printer operator panel 10 the printer operator panel now displays the network settings. Record the ip address (for example, 134.188.26.173). You need this ip address to access the 'océ express webtools' later in order to complete the printer configuration. Use...
Page 54
54 chapter 3 prepare the printing system for use and get started configure the network settings manually configure the network settings manually introduction if you want configure the network settings manually, please contact your network administrator to get information about the network infrastruc...
Page 55
55 configure the network settings manually 4 enter your ip address. Use the 'scroll wheel' to select the first numeric field. Confirm your selection with the 'confirmation key' above the 'scroll wheel'. Use the 'numeric keys' to enter the first value of your ip address. Confirm your entries with the...
Page 56
56 chapter 3 prepare the printing system for use and get started configure the network settings manually 6 enter your default gateway. Use the 'scroll wheel' to select the first numeric field. Confirm your selection with the 'confirmation key' above the 'scroll wheel'. Use the 'numeric keys' to ente...
Page 57
57 load or replace a toner cartridge load or replace a toner cartridge illustration [63] [20] 9 12 11 10 number component description / function 9 'toner cartridge' (cyan) toner cassette for cyan 'océ tonerpearls ™ ' 10 'toner cartridge' (yellow) toner cassette for yellow 'océ tonerpearls ™ ' 11 'to...
Page 58
58 chapter 3 prepare the printing system for use and get started load or replace a toner cartridge how to load or replace a toner cartridge [21] step action remarks 1 the printer operator panel displays a request when you must load or replace a toner cartridge. [64] 2 unpack the toner cartridge. Not...
Page 59
59 load or replace a toner cartridge 4 place the new toner cartridge. Note: you must place the toner cartridge in the correct color position. The toner cartridges have fixed positions. [67] 5 when the new toner cartridge is placed correctly, the following message is displayed on the printer operator...
Page 60: Replace The Maintenance Tray
60 chapter 3 prepare the printing system for use and get started replace the maintenance tray replace the maintenance tray illustration [69] [22] how to replace the maintenance tray attention: always replace the maintenance tray when the 'toner cartridge' is replaced. [23] 7 number component descrip...
Page 61
61 replace the maintenance tray step action remarks 1 the printer operator panel displays a request when you must replace the maintenance tray. [70] 2 follow the instructions in the wizard. Note: please note that the 'maintenance tray drawer' is located at the rear side of the océ colorwave ™ 600 pr...
Page 62
62 chapter 3 prepare the printing system for use and get started replace the maintenance tray 4 lift the old maintenance tray out. [73] 5 place the empty maintenance tray. [74] 6 push the 'maintenance tray drawer' shut. [75] 7 when the new maintenance tray is placed correctly, press 'finish' on the ...
Page 63: Load A Media Roll
63 the 'media drawer' load a media roll the 'media drawer' illustration [77] component - function table attention: only use intact media rolls. Dented media rolls can damage the 'imaging devices'. [24] number component description / function 1 'roll' 1 media roll 3 or 5 in other media drawers 2 'rol...
Page 64
64 chapter 3 prepare the printing system for use and get started the 'media drawer' 4 'roll loading station' groove integrated behind the front cover of the media drawer. To load new media on the printer, the operator must proceed as follows ■ place the new media roll temporarily on the roll loading...
Page 65: Unpack The Media Roll
65 unpack the media roll unpack the media roll how to unpack the media roll attention: handle the media roll with care. A dented media roll can damage the imaging devices. Attention: please note down the media code (for example lfm090) indicated on the sticker on the media box. You need this code to...
Page 66
66 chapter 3 prepare the printing system for use and get started unpack the media roll step description illustration 1 place the media box on a table and open it. [78] 2 remove the plug from the media roll. [79] 3 carefully remove the media roll from the box. [80] 4 remove the other plug and plastic...
Page 67: Load A Media Roll
67 load a media roll load a media roll how to load a media roll attention: do not use dented media rolls to prevent damage to the imaging devices. Attention: do not open the media drawer during the print process. Attention: do not open more than one media drawer at the same time to prevent overbalan...
Page 68
68 chapter 3 prepare the printing system for use and get started load a media roll step description illustration 1 open the correct media drawer to load the new media roll. [81] 2 place the new media roll on the roll loading station. [82] 3 pull the handle of the roll holder locking mechanism toward...
Page 69
69 load a media roll 5 align the roll with the correct size indicator on the roll holder (at the left and right hand side). Release the handle of the locking mechanism. [85] 6 remove the two tapes from the new media roll. Use both hands (as indicated) to place the media roll in the media drawer. [86...
Page 70
70 chapter 3 prepare the printing system for use and get started load a media roll 9 close the media drawer. Note: do not open the 'media drawer' during loading. [89] 10 the next screen appears on the printer operator panel. [90] step description illustration.
Page 71
71 define the media type and the core size define the media type and the core size how to define the media type and the core size [27] step screen screen dump 1 if the displayed media type and core size is correct you can press 'next ' and go to step 4. Otherwise, press 'other media' and continue wi...
Page 72
72 chapter 3 prepare the printing system for use and get started define the media type and the core size 4 use the 'scroll wheel' to select the clean-cut length for your new media roll and confirm your entry with the 'confirmation key' note: select 'long strip' for new media. [94] 5 press 'finish' a...
Page 73: Webtools
73 complete the printer configuration in the océ express webtools complete the printer configuration in the océ express webtools 1. Open a web browser on a customer workstation connected to the network. 2. Enter the following address: 'http://' (for example http://134.188.26.173) to access the océ e...
Page 74
74 chapter 3 prepare the printing system for use and get started complete the printer configuration in the océ express webtools [98] 5. Use the password 'sysadm' or the new password to logon as system administrator. See change the password on page 91.
Page 75
75 complete the printer configuration in the océ express webtools [99] note: it is advised to change the password change the password on page 91 . 6. Once logged in, enter the printer 'host name' (for example: ocecolorwave600) in the 'identification' window, in order to address the océ colorwave ™ 6...
Page 76
76 chapter 3 prepare the printing system for use and get started complete the printer configuration in the océ express webtools [101] if an error page ('page cannot be displayed') appears, contact the network administrator. Check the host name and the other web browser security and network settings....
Page 77: 600
77 configure the regional settings of the océ colorwave ™ 600 configure the regional settings of the océ colorwave ™ 600 purpose the regional settings are configured during the installation of your océ colorwave ™ 600. If you want to change the initial configuration, you can do so in the 'regional s...
Page 78
78 chapter 3 prepare the printing system for use and get started print the customer acceptance test (cat) demo print print the customer acceptance test (cat) demo print when to do when you installed the printer and prepared the printer for use, you can print the customer acceptance test demo print. ...
Page 79
79 print the customer acceptance test (cat) demo print how to print the customer acceptance test (cat) demo print [28] step action remarks 1 from the 'home' screen on the printer operator panel select the 'system' tab. [102] 2 select the 'maintenance' tab with the upper left softkey. [103] 3 use the...
Page 80
80 chapter 3 prepare the printing system for use and get started print the customer acceptance test (cat) demo print result evaluate the customer acceptance test print. Check if the print does not show any of the following output quality problems: ■ banding across the print with differences in color...
Page 81: Chapter 4
81 chapter 4 configure the printing system.
Page 82: Webtools
82 chapter 4 configure the printing system purpose of the océ express webtools introduction to the océ express webtools purpose of the océ express webtools definition the océ express webtools is an application that runs on the embedded océ colorwave ™ 600 web server. You can use an internet browser ...
Page 83
83 purpose of the océ express webtools illustration [108] 'jobs' tab editable for any user. When you access the 'jobs' tab you can do the following. ■ get an overview of job queue. ■ delete jobs in the queue. ■ move jobs in the queue to the top of the queue (increase priority). ■ submit a new job. T...
Page 84
84 chapter 4 configure the printing system purpose of the océ express webtools [29] 'configuration' tab editable for system administrator and power user user roles and authorizations on page 88 . The 'configuration' tab contains the settings to install the system in your infrastructure, according to...
Page 85
85 purpose of the océ express webtools [31] tab groups 'support' 'about' ■ information about the océ colorwave ™ 600 system software version. ■ view total area click counter. The total area click or 'tac' is a new click that is a function of print volume (square meter) and of toner coverage (grams /...
Page 86
86 chapter 4 configure the printing system set another language for the océ express webtools set another language for the océ express webtools introduction the language setting of the internet browser you use defines the language in which the user interface of the océ express webtools is displayed. ...
Page 87
87 set another language for the océ express webtools 7. Click ok to confirm or cancel to close both windows again. 8. Click reload in the toolbar or open another page. The language of the application will be changed..
Page 88
88 chapter 4 configure the printing system user roles and authorizations user roles and authorizations introduction the settings in the océ express webtools must be configured and managed to enable the optimal performance of the océ colorwave ™ 600. You can view all the settings in the océ express w...
Page 89: Log In As An Authorized User
89 log in as an authorized user log in as an authorized user purpose in order to have write access for certain groups of settings, you must log in as an authorized user. There are 3 user roles, system administrator, key operator and power user who have authorization to edit specific groups of settin...
Page 90: Log Out After Your Session
90 chapter 4 configure the printing system log out after your session log out after your session purpose when you have finished the modification of a setting, it is advised to log out again. This way, it is not possible for another user to access and change the settings. How to log out after you hav...
Page 91: Change The Password
91 change the password change the password when to do for security reasons it is advised to periodically change the password for the 3 access modes (key operator, system administrator, power user) to the océ express webtools. How to change the password 1. Click 'preferences' - 'system defaults' - 'p...
Page 92: Update The Océ Colorwave
92 chapter 4 configure the printing system update the océ colorwave ™ 600 software update the océ colorwave ™ 600 software introduction the océ express webtools allow you to update your system software. Before you begin this setting is editable for the system administrator or power user. How to upda...
Page 93: View and Check The Settings
93 view and check the settings view and check the settings purpose view and check the settings and the values that are stored when you create a back-up file. When to do ■ before you create a back-up file of the data in the océ express webtools. ■ to check which settings are no longer set to the fact...
Page 94
94 chapter 4 configure the printing system create a back-up file of the settings create a back-up file of the settings purpose create a back-up file with the settings and the values that you configured in the océ express webtools. When to do ■ duplicate the settings very easily to another printer. ■...
Page 95: Restore A Back-Up File
95 restore a back-up file restore a back-up file when to do ■ duplicate the settings to another printer. ■ go back to the settings that you have saved in a previous back-up file. Note: not all settings are restored in the back-up file. The network settings and the passwords are excluded from the bac...
Page 96: Restore The Factory Defaults
96 chapter 4 configure the printing system restore the factory defaults restore the factory defaults when to do ■ when you want to restore the factory default settings and values of your océ express webtools. How to restore the factory defaults 1. Click the 'configuration' tab or the 'preferences' t...
Page 97: Check Your Licenses
97 check your licenses check your licenses about the licenses the 'support' - 'licenses' tab in the océ express webtools allows you to manage the licenses that are active on your system. A license is needed to activate certain functions on your océ colorwave ™ 600. You can use the 'support' - 'licen...
Page 98
98 chapter 4 configure the printing system check your licenses [33] information description 'option' this field displays the name of the option. For océ colorwave ™ 600 the following licenses are available. ■ océ colorwave ™ 600 base license. ■ adobe ® postscript 3 / pdf. ■ japanese postscript fonts...
Page 99
99 save the currently active licenses save the currently active licenses introduction you can save all current active licenses of different licenses types into one single file. Purpose save the current active licenses for the following purposes. ■ collect and save all active licenses of different ty...
Page 100: Get A New License
100 chapter 4 configure the printing system get a new license get a new license introduction the océ applications and optional functions are protected against unauthorized use. You need to activate the license to enable an application or optional function for use. The 'licenses' tab enables you to u...
Page 101
101 get a new license result ■ if you have updated an expired license, the new license file overwrites the previous license file. ■ if you have uploaded a new license, the license state in the overview is changed from 'not authorized' to 'authorized'..
Page 102: Configure The Printer
102 chapter 4 configure the printing system configure the regional settings of the océ colorwave ™ 600 configure the printer the 'system defaults' tab in the océ express webtools configure the regional settings of the océ colorwave ™ 600 purpose the regional settings are configured during the instal...
Page 103
103 define the display languages of the printer define the display languages of the printer introduction the océ express webtools allows you to define the 'first language' (the default display language) and the 'second language' (the alternative display language) for the printer operator panel. The ...
Page 104
104 chapter 4 configure the printing system configure the 'media request time-out' configure the 'media request time-out' introduction the printer operator panel displays a media request when a media is requested that is not available. When this setting is disabled, the media request will be display...
Page 105
105 configure the 'printer panel time-out' configure the 'printer panel time-out' introduction the printer operator panel can automatically return to the home screen. When this setting is disabled, the panel never returns to the home screen automatically. Note: when enabled, the printer operator pan...
Page 106: 600
106 chapter 4 configure the printing system configure the energy save modes of the océ colorwave ™ 600 configure the energy save modes of the océ colorwave ™ 600 introduction the océ colorwave ™ 600 offers two energy save modes that you can set if the printer is idle for a defined period. The config...
Page 107: 600
107 define the media configuration of the océ colorwave ™ 600 define the media configuration of the océ colorwave ™ 600 introduction you must indicate in the océ express webtools the following settings. ■ the core size of the media rolls ■ the folder value ■ the media series how to define the core s...
Page 108
108 chapter 4 configure the printing system define the media configuration of the océ colorwave ™ 600 how to define the media series attention: access the océ express webtools. This setting is editable for the key operator and the power user. 1. Navigate to 'preferences' - 'system defaults' - 'hardw...
Page 109: Webtools
109 configure the network settings in the océ express webtools the 'configuration' tab in the océ express webtools configure the network settings in the océ express webtools how to configure the network settings in the océ express webtools 1. Click 'configuration' - 'network' - 'adapter 1, tcp/ip'. ...
Page 110
110 chapter 4 configure the printing system change the display language of the printer relevant settings on the printer operator panel change the display language of the printer introduction the océ express webtools allows you to define the 'first language' (the default display language) and the 'se...
Page 111
111 change the display language of the printer 2 use the upper right softkey to select the 'configuration' tab. [111] 3 press the lower left softkey to toggle between the first language and the second language. Note: only the first language (default language) and the second language (alternative lan...
Page 112
112 chapter 4 configure the printing system configure the network settings on the printer operator panel configure the network settings on the printer operator panel when to do when you have no connection to the océ colorwave ™ 600 printer you cannot use the océ express webtools to edit the network ...
Page 113
113 configure the network settings on the printer operator panel 3 use the scroll wheel to select 'configure network settings' and press the confirmation key. [115] 4 the printer operator panel displays the current network settings. To change these settings press 'begin' - lower right softkey - to s...
Page 114
114 chapter 4 configure the printing system configure the network settings on the printer operator panel 6 select one of the following options. ■ 'auto detect' use the 'scroll wheel' to select 'auto detect' if the system must automatically detect your network settings. Confirm your entry with the 'c...
Page 115
115 configure the network settings on the printer operator panel 8 the printer operator panel now displays the network settings. Record the ip address (for example, 134.188.26.173). You need this ip address to access the 'océ express webtools' later in order to complete the printer configuration. Us...
Page 116: Configure Print Jobs
116 chapter 4 configure the printing system set the default print job settings configure print jobs relevant settings in the océ express webtools set the default print job settings definition you can use the océ express webtools to configure the default values for the print job settings. The print j...
Page 117
117 set the default print job settings 'preferences' - 'print job defaults' - 'basic' [37] overview of the default print job settings - sheet editable for key operator and power user. 'preferences' - 'print job defaults' - 'sheet' setting description 'number of sets' enter the default value for the ...
Page 118
118 chapter 4 configure the printing system set the default print job settings [38] overview of the default print job settings - image editable for key operator and power user. 'preferences' - 'print job defaults' - 'image' setting description 'media source' the 'media source' setting can be used to...
Page 119
119 set the default print job settings [39] overview of the default print job settings - layout editable for key operator and power user. 'preferences' - 'print job defaults' - 'layout' [40] setting description 'scale' 'scales the image to the defined percentage.' (100% is no scaling) 'mirror' [127]...
Page 120
120 chapter 4 configure the printing system set the color management settings set the color management settings introduction in most cases, you define the color management settings for a print job during the job submission process. You can select the color management settings in your print job submi...
Page 121
121 set the color management settings [41] setting group setting description 'for hp-gl, hp-gl/2 and hp-rtl files' 'color feel' use this setting to define the default 'look and feel' for print files if you use the océ windows ® printer driver to send your print jobs. If you select 'océ enhanced colo...
Page 122
122 chapter 4 configure the printing system set the color management settings predefined color management settings per input file type [42] [42] color management settings input file type color feel 'océ enhanced colors' 'for hp-gl, hp-gl/2 and hp-rtl files' 'océ cad colors' n.A. 'for tiff and jpeg f...
Page 123: Chapter 5
123 chapter 5 use the printing system.
Page 124: Work With The Océ Colorwave
124 chapter 5 use the printing system the 'media drawer' work with the océ colorwave ™ 600 printer set up the printer the 'media drawer' illustration [130] component - function table attention: only use intact media rolls. Dented media rolls can damage the 'imaging devices'. [43] number component de...
Page 125
125 the 'media drawer' 4 'roll loading station' groove integrated behind the front cover of the media drawer. To load new media on the printer, the operator must proceed as follows ■ place the new media roll temporarily on the roll loading station ■ insert the roll holder into the new media roll ■ p...
Page 126: Remove A Media Roll
126 chapter 5 use the printing system remove a media roll remove a media roll how to remove a media roll attention: do not open the media drawer during the print process. Attention: do not open more than one media drawer at the same time to prevent overbalance of the printer. Caution: watch your fin...
Page 127
127 remove a media roll 3 put the roll holder with the media roll on the roll loading station. [133] 4 pull the handle of the roll holder locking mechanism towards you. [134] 5 remove the roll holder from the core of the media roll. [135] 6 remove the media roll from the roll loading station. Step d...
Page 128: Unpack The Media Roll
128 chapter 5 use the printing system unpack the media roll unpack the media roll how to unpack the media roll attention: handle the media roll with care. A dented media roll can damage the imaging devices. Attention: please note down the media code (for example lfm090) indicated on the sticker on t...
Page 129
129 unpack the media roll [45] step description illustration 1 place the media box on a table and open it. [136] 2 remove the plug from the media roll. [137] 3 carefully remove the media roll from the box. [138] 4 remove the other plug and plastic around the media roll..
Page 130: Load A Media Roll
130 chapter 5 use the printing system load a media roll load a media roll how to load a media roll attention: do not use dented media rolls to prevent damage to the imaging devices. Attention: do not open the media drawer during the print process. Attention: do not open more than one media drawer at...
Page 131
131 load a media roll step description illustration 1 open the correct media drawer to load the new media roll. [139] 2 place the new media roll on the roll loading station. [140] 3 pull the handle of the roll holder locking mechanism towards you. [141] 4 slide the roll holder in the core of the new...
Page 132
132 chapter 5 use the printing system load a media roll 5 align the roll with the correct size indicator on the roll holder (at the left and right hand side). Release the handle of the locking mechanism. [143] 6 remove the two tapes from the new media roll. Use both hands (as indicated) to place the...
Page 133
133 load a media roll 9 close the media drawer. Note: do not open the 'media drawer' during loading. [147] 10 the next screen appears on the printer operator panel. [148] step description illustration.
Page 134
134 chapter 5 use the printing system define the media type and the core size define the media type and the core size how to define the media type and the core size [47] step screen screen dump 1 if the displayed media type and core size is correct you can press 'next ' and go to step 4. Otherwise, ...
Page 135
135 define the media type and the core size 4 use the 'scroll wheel' to select the clean-cut length for your new media roll and confirm your entry with the 'confirmation key' note: select 'long strip' for new media. [152] 5 press 'finish' and return to the 'home' screen. Note: when the strip is cut ...
Page 136: The Output Delivery
136 chapter 5 use the printing system the output delivery the output delivery introduction there are three factors that can influence the delivery destination of the printed output. 1. The media profile of the media you use. Some media profiles require a specific output delivery. If the correct medi...
Page 137
137 the output delivery [154] the output delivery attention: the table below gives an overview of the common output delivery destination. If the media profile of the media you use requires a specific output delivery, the common delivery destination will be overruled. [48].
Page 138
138 chapter 5 use the printing system the output delivery when the media roll you use has a and the default 'delivery destination' is then the printed output 3" roll core 'top delivery tray' is delivered at the 'top delivery tray' [155] 3" roll core 'external output (back)' is lead through the slot ...
Page 139: Panel
139 make a new media profile available on the printer operator panel make a new media profile available on the printer operator panel how to make a new media profile available on the printer operator panel 1. Download the correct media profile from the océ website ( download a media profile from the...
Page 140
140 chapter 5 use the printing system load or replace a toner cartridge load or replace a toner cartridge illustration [157] [49] 9 12 11 10 number component description / function 9 'toner cartridge' (cyan) toner cassette for cyan 'océ tonerpearls ™ ' 10 'toner cartridge' (yellow) toner cassette fo...
Page 141
141 load or replace a toner cartridge how to load or replace a toner cartridge [50] step action remarks 1 the printer operator panel displays a request when you must load or replace a toner cartridge. [158] 2 unpack the toner cartridge. Note: please do not throw away the empty packaging of the new t...
Page 142
142 chapter 5 use the printing system load or replace a toner cartridge 4 place the new toner cartridge. Note: you must place the toner cartridge in the correct color position. The toner cartridges have fixed positions. [161] 5 when the new toner cartridge is placed correctly, the following message ...
Page 143: Replace The Maintenance Tray
143 replace the maintenance tray replace the maintenance tray illustration [163] [51] how to replace the maintenance tray attention: always replace the maintenance tray when the 'toner cartridge' is replaced. [52] 7 number component description / function 7 'maintenance tray drawer'.
Page 144
144 chapter 5 use the printing system replace the maintenance tray step action remarks 1 the printer operator panel displays a request when you must replace the maintenance tray. [164] 2 follow the instructions in the wizard. Note: please note that the 'maintenance tray drawer' is located at the rea...
Page 145
145 replace the maintenance tray 5 place the empty maintenance tray. [168] 6 push the 'maintenance tray drawer' shut. [169] 7 when the new maintenance tray is placed correctly, press 'finish' on the 'printer operator panel' to continue. [170] step action remarks.
Page 146: Monitor The Printer
146 chapter 5 use the printing system the system monitor and the system states monitor the printer the system monitor and the system states introduction you can activate the system monitor to get an overview of the current status of the printing system. How to activate the system monitor [53].
Page 147
147 the system monitor and the system states if you use the then printer operator panel from the 'home' screen select 'system' with the 'lower left softkey'. [171] océ express webtools click on the 'system' tab in the lower left corner of the screen. The system monitor pops-up. [172].
Page 148
148 chapter 5 use the printing system the system monitor and the system states how to view the system states the system states provide you with additional information about the printer. The system state messages are displayed on the printer operator panel and in the océ express webtools. 1. On the p...
Page 149: Control The Printer
149 switch on or switch off the printer control the printer switch on or switch off the printer how to switch on or switch off the printer [55] on / off switch. Illustration the 'on / off switch' at the front side of the printer. Use this switch in your daily work to switch on and switch off the pri...
Page 150: Pause Or Resume The Printer
150 chapter 5 use the printing system pause or resume the printer pause or resume the printer introduction if you do not want the printer to start printing you can pause the printer. If the printer can start printing again you can resume the printer. How to 'pause' or 'resume' the printer [56] actio...
Page 151: Introduction
151 introduction solve problems with the printer introduction introduction if there is a problem with the printer that the operator can solve, the printer operator panel displays the following message. [178] please follow the instructions on the printer operator panel step by step. For additional in...
Page 152: Cover Or Drawer Opened
152 chapter 5 use the printing system cover or drawer opened cover or drawer opened introduction the media drawers and certain covers must only be opened if you are asked to do so in a wizard on the printer operator panel. Attention: when you open one of the indicated covers or drawers while you are...
Page 153
153 cover or drawer opened displayed warning position of the component [179] 'media drawer' [2, 3, 4] [180] note: normally you open a media drawer to load or replace a media roll or in case of a media jam. [181] 'front cover' [6] [182] note: normally you open the front cover in case of a media jam. ...
Page 154
154 chapter 5 use the printing system cover or drawer opened [183] 'top cover' [14] [184] note: normally you open the top cover in case of a media jam, to check the guide flap check and clean the guide flap on page 161 or to check the print surface check and clean the print surface on page 158 . [18...
Page 155
155 remove the 'top delivery tray' and open the 'top cover' remove the 'top delivery tray' and open the 'top cover' how to remove the 'top delivery tray' and open the 'top cover' [58] step action remarks 1 pull up the left part of the top delivery tray. [187] 2 lock the left part of the top delivery...
Page 156
156 chapter 5 use the printing system remove the 'top delivery tray' and open the 'top cover' 3 open the 'top cover'. [189] 4 check and clean the print surface on page 158 [1] or check and clean the guide flap on page 161 [2]. [190] step action remarks.
Page 157
157 close the 'top cover' and replace the 'top delivery tray' close the 'top cover' and replace the 'top delivery tray' if you are ready [59] step action remarks 1 close the 'top cover'. [191] 2 unlock the metal locking mechanisms of the left and the right part of the top delivery tray. [192] 3 flap...
Page 158
158 chapter 5 use the printing system check and clean the print surface check and clean the print surface introduction this document describes how to check and clean the print surface. When to do when a media jam occurs or when there is pollution on your printed output, one of the steps to solve the...
Page 159
159 check and clean the print surface how to check and clean the print surface [60] step action remarks 1 remove the top delivery tray and open the 'top cover'. Remove the 'top delivery tray' and open the 'top cover' on page 155 [195] 2 check if toner drops are on the print surface. [196] 3 remove t...
Page 160
160 chapter 5 use the printing system check and clean the print surface 4 check if the holes in the print surface are open. If not: use the edge of the clean card to open the holes. [198] 5 place back the clean card in the clean card holder. 6 close the top cover and replace the top delivery tray. C...
Page 161
161 check and clean the guide flap check and clean the guide flap introduction this document describes how the check and clean the guide flap. When to do when a media jam occurs or when there is pollution on your printed output, one of the steps to solve the problem is to clean the guide flap. Requi...
Page 162
162 chapter 5 use the printing system check and clean the guide flap step action remarks 1 remove the top delivery tray and open the 'top cover'. Remove the 'top delivery tray' and open the 'top cover' on page 155 [201] 2 check if the guide flap is polluted with toner. [202] 3 remove the toner pollu...
Page 163
163 check and clean the guide flap 4 place back the clean card in the clean card holder. 5 close the top cover and replace the top delivery tray. Close the 'top cover' and replace the 'top delivery tray' on page 157 [204] step action remarks.
Page 164
164 chapter 5 use the printing system adjust the 'top delivery tray' adjust the 'top delivery tray' introduction this document describes how to adjust the 'top delivery tray'. When to do when you want to increase the distance between the guides of the top delivery tray in order to collect more print...
Page 165
165 adjust the 'top delivery tray' how to adjust the top delivery tray [62] step action remarks 1 pull up the metal guide of the 'top delivery tray'. [206] 2 use your finger or the cross screwdriver to adjust the position of the metal guide (both sides). [207] 3 flap back the metal guide to check if...
Page 166
166 chapter 5 use the printing system adjust the 'top delivery tray' 4 repeat step 1 to 3 for the second metal guide. [209] 5 check if both metal guides are in the same position. Correct the position if necessary. [210] step action remarks.
Page 167: Handle A Media Jam
167 handle a media jam handle a media jam introduction when a media jam occurs, one of the steps to solve the problem is to cut the jammed media. The printer operator panel displays the following message. [211] how to cut the media [63] step action remarks 1 use your right hand to push down the meta...
Page 168: Create Print Jobs
168 chapter 5 use the printing system create, manage and print jobs create print jobs create, manage and print jobs introduction in a normal workflow environment you can identify several components that enable you to create, manage and print jobs. Illustration [213] [64] note: you can find detailed ...
Page 169
169 create, manage and print jobs ■ the 'océ publisher select' online help ■ the 'océ publisher select' user manual.
Page 170: Set Up Print Jobs
170 chapter 5 use the printing system what you need to know before you send your print jobs set up print jobs what you need to know before you send your print jobs definition before you send print jobs to the océ colorwave ™ 600, remember the following. ■ the values defined in the océ express webtoo...
Page 171
171 use 'océ publisher express' to send a print job use 'océ publisher express' to send a print job introduction 'océ publisher express' is a job submitter that is integrated in the 'océ express webtools'. Illustration [214].
Page 172
172 chapter 5 use the printing system use 'océ publisher express' to send a print job how to use 'océ publisher express' to send a print job [65] step action remarks 1 open your web browser. Use one of the following web browsers ■ microsoft ® internet explorer 6.0 (or higher) ■ mozilla firefox ™ 1.5...
Page 173
173 use océ publisher select to send a print job use océ publisher select to send a print job introduction océ provides océ publisher select as a job submission software application that allows you to send print jobs to your océ colorwave ™ 600. Illustration [215] how to use océ publisher select to ...
Page 174
174 chapter 5 use the printing system use océ publisher select to send a print job note: more information about how to install, configure and use the job submission application is available in the documentation provided with océ publisher select. ■ the océ publisher select online help ■ the océ publ...
Page 175: Use The Océ Windows
175 use the océ windows ® printer driver to send a print job use the océ windows ® printer driver to send a print job introduction océ provides the océ windows ® printer driver that allows you to send print jobs to your océ colorwave ™ 600. This driver is a mixed raster-vector hp-gl/2 printer driver...
Page 176
176 chapter 5 use the printing system use the océ windows ® printer driver to send a print job note: more information about how to install, configure and use the driver is available in the documentation provided with the océ windows ® printer driver. ■ the océ windows ® printer driver online help ■ ...
Page 177: Use The Océ Postscript
177 use the océ postscript ® 3 driver to send a print job use the océ postscript ® 3 driver to send a print job introduction océ provides the océ postscript ® 3 driver that allows you to send print jobs to your océ colorwave ™ 600. Illustration [217] how to use the océ postscript ® 3 driver to send ...
Page 178
178 chapter 5 use the printing system use the océ postscript ® 3 driver to send a print job note: more information about how to install, configure and use the driver is available in the documentation provided with the océ postscript ® 3 driver. ■ the océ postscript ® 3 driver online help ■ the océ p...
Page 179: 600
179 use ftp to send a print job to the océ colorwave ™ 600 use ftp to send a print job to the océ colorwave ™ 600 introduction the océ colorwave ™ 600 supports printing through ftp. If you send your print job through ftp the default océ express webtools settings are leading. How to send a print job ...
Page 180: 600
180 chapter 5 use the printing system use lpr to send a print job to the océ colorwave ™ 600 use lpr to send a print job to the océ colorwave ™ 600 introduction the océ colorwave ™ 600 supports printing through lpr. If you send your print job through lpr the default océ express webtools settings are...
Page 181: Monitor Print Jobs
181 the job states monitor print jobs the job states [70] state description 'active job' the active job that the system is currently printing. 'waiting job' the waiting jobs are all not-active jobs, regardless of their state. 'processing job' the system is processing the job data. 'attention job' a ...
Page 182: Control Print Jobs
182 chapter 5 use the printing system pause, resume or delete an active job control print jobs pause, resume or delete an active job introduction this section describes how to pause, resume or delete an active job. How to 'pause' or 'resume' an active print job [71] how to delete an active print job...
Page 183
183 how to solve problems with print jobs solve problems with print jobs how to solve problems with print jobs introduction if there is a problem with a print job, the color of the green 'jobs - queue' bar in the océ express webtools turns red. The system monitor section of the océ express webtools ...
Page 184
184 chapter 5 use the printing system how to solve problems with print jobs.
Page 185: Chapter 6
185 chapter 6 manage media on the océ colorwave ™ 600 printing system.
Page 186
186 chapter 6 manage media on the océ colorwave ™ 600 printing system overview of the media related settings overview of the media related settings introduction it is important to make sure that the media related settings of your system are set to generate an optimal print result. You can set media ...
Page 187
187 overview of the media related settings media related settings description in the océ express webtools the océ express webtools allow you to manage the media profiles on the printer. In the 'support' - 'media' tab your can download new media profiles, upload media profiles to the 'océ powerm cont...
Page 188: 600
188 chapter 6 manage media on the océ colorwave ™ 600 printing system define the media configuration of the océ colorwave ™ 600 define the media configuration of the océ colorwave ™ 600 introduction you must indicate in the océ express webtools the following settings. ■ the core size of the media ro...
Page 189
189 define the media configuration of the océ colorwave ™ 600 how to define the media series attention: access the océ express webtools. This setting is editable for the key operator and the power user. 1. Navigate to 'preferences' - 'system defaults' - 'hardware configuration'. 2. Click the value f...
Page 190: Manage The Media Profiles
190 chapter 6 manage media on the océ colorwave ™ 600 printing system manage the media profiles manage the media profiles introduction the océ express webtools allow you to manage the media profiles on the printer. Before you begin this setting is editable for the key operator or power user. How to ...
Page 191
191 manage the media profiles 2. Click the media type, for example 'océ red label 75gr', to check the media profile information. 3. Click the check box of a media profile and click the 'enable' button in the toolbar above the media profiles list to make the media profile available on the printer ope...
Page 192
192 chapter 6 manage media on the océ colorwave ™ 600 printing system download a media profile from the océ web site download a media profile from the océ web site when to do when a new media profile is available or an existing media profile needs to be updated you can retrieve the required media pr...
Page 193
193 download a media profile from the océ web site [225] [226] 3. Download the correct zip file to a location on your workstation. 4. Extract the files in the zip file. The zip file contains at least an instruction file how to handle the media profiles. 5. Follow the steps described in the instructi...
Page 194: Upload A Media Profile
194 chapter 6 manage media on the océ colorwave ™ 600 printing system upload a media profile upload a media profile when to do when you have downloaded the zip file of a new or updated media profile from the corporate web site you need to upload this media profile to the océ colorwave ™ 600 embedded...
Page 195: Replace A Media Roll
195 the 'media drawer' replace a media roll the 'media drawer' illustration [227] component - function table attention: only use intact media rolls. Dented media rolls can damage the 'imaging devices'. [75] number component description / function 1 'roll' 1 media roll 3 or 5 in other media drawers 2...
Page 196
196 chapter 6 manage media on the océ colorwave ™ 600 printing system the 'media drawer' 4 'roll loading station' groove integrated behind the front cover of the media drawer. To load new media on the printer, the operator must proceed as follows ■ place the new media roll temporarily on the roll lo...
Page 197: Remove A Media Roll
197 remove a media roll remove a media roll how to remove a media roll attention: do not open the media drawer during the print process. Attention: do not open more than one media drawer at the same time to prevent overbalance of the printer. Caution: watch your fingers when you handle the media rol...
Page 198
198 chapter 6 manage media on the océ colorwave ™ 600 printing system remove a media roll 3 put the roll holder with the media roll on the roll loading station. [230] 4 pull the handle of the roll holder locking mechanism towards you. [231] 5 remove the roll holder from the core of the media roll. [...
Page 199: Unpack The Media Roll
199 unpack the media roll unpack the media roll how to unpack the media roll attention: handle the media roll with care. A dented media roll can damage the imaging devices. Attention: please note down the media code (for example lfm090) indicated on the sticker on the media box. You need this code t...
Page 200
200 chapter 6 manage media on the océ colorwave ™ 600 printing system unpack the media roll step description illustration 1 place the media box on a table and open it. [233] 2 remove the plug from the media roll. [234] 3 carefully remove the media roll from the box. [235] 4 remove the other plug and...
Page 201: Load A Media Roll
201 load a media roll load a media roll how to load a media roll attention: do not use dented media rolls to prevent damage to the imaging devices. Attention: do not open the media drawer during the print process. Attention: do not open more than one media drawer at the same time to prevent overbala...
Page 202
202 chapter 6 manage media on the océ colorwave ™ 600 printing system load a media roll step description illustration 1 open the correct media drawer to load the new media roll. [236] 2 place the new media roll on the roll loading station. [237] 3 pull the handle of the roll holder locking mechanism...
Page 203
203 load a media roll 5 align the roll with the correct size indicator on the roll holder (at the left and right hand side). Release the handle of the locking mechanism. [240] 6 remove the two tapes from the new media roll. Use both hands (as indicated) to place the media roll in the media drawer. [...
Page 204
204 chapter 6 manage media on the océ colorwave ™ 600 printing system load a media roll 9 close the media drawer. Note: do not open the 'media drawer' during loading. [244] 10 the next screen appears on the printer operator panel. [245] step description illustration.
Page 205
205 define the media type and the core size define the media type and the core size how to define the media type and the core size [79] step screen screen dump 1 if the displayed media type and core size is correct you can press 'next ' and go to step 4. Otherwise, press 'other media' and continue w...
Page 206
206 chapter 6 manage media on the océ colorwave ™ 600 printing system define the media type and the core size 4 use the 'scroll wheel' to select the clean-cut length for your new media roll and confirm your entry with the 'confirmation key' note: select 'long strip' for new media. [249] 5 press 'fin...
Page 207: The Output Delivery
207 the output delivery the output delivery introduction there are three factors that can influence the delivery destination of the printed output. 1. The media profile of the media you use. Some media profiles require a specific output delivery. If the correct media profile is available on your pri...
Page 208
208 chapter 6 manage media on the océ colorwave ™ 600 printing system the output delivery [251] the output delivery attention: the table below gives an overview of the common output delivery destination. If the media profile of the media you use requires a specific output delivery, the common delive...
Page 209
209 the output delivery when the media roll you use has a and the default 'delivery destination' is then the printed output 3" roll core 'top delivery tray' is delivered at the 'top delivery tray' [252] 3" roll core 'external output (back)' is lead through the slot below the 'top back cover' at the ...
Page 210: Panel
210 chapter 6 manage media on the océ colorwave ™ 600 printing system make a new media profile available on the printer operator panel make a new media profile available on the printer operator panel how to make a new media profile available on the printer operator panel 1. Download the correct medi...
Page 211
211 define the correct media for your jobs define the correct media for your jobs definition to achieve optimal output quality, make sure that you load and define the correct media type on the printer. Make sure you define the correct media type for your job. Check if the media type (with the correc...
Page 212: Laminate The Media
212 chapter 6 manage media on the océ colorwave ™ 600 printing system laminate the media laminate the media introduction for durability or protection purposes you can decide to laminate your printed output. Please refer to preferred océ laminates on page 305 to find an overview of the advised océ la...
Page 213: Handle A Media Jam
213 handle a media jam handle a media jam introduction when a media jam occurs, one of the steps to solve the problem is to cut the jammed media. The printer operator panel displays the following message. [254] how to cut the media [83] step action remarks 1 use your right hand to push down the meta...
Page 214
214 chapter 6 manage media on the océ colorwave ™ 600 printing system handle a media jam.
Page 215: Chapter 7
215 chapter 7 print quality and print productivity.
Page 216
216 chapter 7 print quality and print productivity main settings that influence the print quality main settings that influence the print quality overview table print quality settings to increase the print quality of your system, you can define the following default settings to configure the system t...
Page 217
217 main settings that influence the print productivity main settings that influence the print productivity overview table of print productivity settings to increase the print productivity of your system, you can change the following settings to let the printer print faster and more efficiently. Bea...
Page 218: Set The 'Color Mode'
218 chapter 7 print quality and print productivity set the 'color mode' set the 'color mode' introduction use the océ express webtools to set the printer's default setting for the 'color mode' for a print job. Note: if you select this setting in your print job submission application (océ windows ® p...
Page 219: Set The 'Print Setting'
219 set the 'print setting' set the 'print setting' introduction the 'print setting' in the 'print job defaults' section allows you to set the printer's default value if no quality mode has been set in the print job. Note: if you select this setting in your print job submission application (océ wind...
Page 220
220 chapter 7 print quality and print productivity set the 'print setting' before you begin this setting is editable for the key operator or power user. How to set the 'print setting' 1. Click 'preferences'- 'print job defaults' - 'basic'. 2. Click 'edit' in the 'basic' bar or click the value of the...
Page 221
221 set the 'océ print assistant behavior' set the 'océ print assistant behavior' introduction this setting is only used when the 'print setting' is set to 'océ print assistant'. The 'océ print assistant' decides what print setting ('production', 'presentation' or 'economy') must be used, based on t...
Page 222
222 chapter 7 print quality and print productivity set the 'production plus' setting set the 'production plus' setting introduction with this setting you can define how the océ colorwave ™ 600 must interpret the 'print setting''production'. Before you begin this setting is editable for the key opera...
Page 223
223 set the 'automatic roll switch' set the 'automatic roll switch' introduction you can choose one of following values. ■ 'enable' select this value if you have two or more media rolls that contain identical media (the same media type and media size). In that case, the printer can automatically swi...
Page 224: Set The 'Spool Threshold'
224 chapter 7 print quality and print productivity set the 'spool threshold' set the 'spool threshold' introduction when the job memory is full the printer can not receive new jobs. You can tune the 'spool threshold' to define the spool capacity for specific job types. Allow a higher capacity for sm...
Page 225: Set The 'Rotation' Mode
225 set the 'rotation' mode set the 'rotation' mode introduction the 'rotation' setting allows you to rotate the image according to predefined rotation values or you can let the printer perform the rotation automatically. Choose one of the following values. ■ 'no rotation' ■ '90°' ■ '180°' ■ '270°' ...
Page 226: Set The 'Alignment' Mode
226 chapter 7 print quality and print productivity set the 'alignment' mode set the 'alignment' mode introduction you can optimize the print productivity by reducing the distance the print carriage needs to travel to print the output. To do so you can align the image to the top-right hand corner of ...
Page 227
227 set the 'network duplex mode' set the 'network duplex mode' introduction use the océ express webtools to set 'network duplex mode' for your network adapter. The list of values you can select depends on the type of network card. Before you begin this setting is editable for the system administrat...
Page 228: Set The 'Network Speed'
228 chapter 7 print quality and print productivity set the 'network speed' set the 'network speed' introduction use the océ express webtools to set 'network speed' for your network adapter. The list of values you can select depends on the type of network card. Before you begin this setting is editab...
Page 229: Color Management
229 what is color management? Color management what is color management? Definition the 'color management' settings help you to reproduce the colors of your input as precisely as possible on the printed output. With the 'color management' settings you define how to convert the color-information of t...
Page 230
230 chapter 7 print quality and print productivity what is an input profile / standardization? What is an input profile / standardization? Definition an input profile / standardization defines what color space you must use to interpret the color information of the file you want to print in a correct...
Page 231
231 what is an input profile / standardization? [257] you can define the input profile if you use the 'color feel' setting 'océ enhanced colors'. The table below gives an overview of the possible input profiles / standardization settings. [88] input profile / standardization description rgb - 'srgb'...
Page 232
232 chapter 7 print quality and print productivity what is an input profile / standardization? Cmyk - 'us web coated (swop)' this setting indicates an offset press standard, frequently used in the us to print separations and proofs on coated media. Cmyk - 'us web uncoated' this setting indicates an ...
Page 233: What Is Color Feel?
233 what is color feel? What is color feel? Definition with the 'color feel' setting you can fine-tune the look and feel of the printed colors. The 'color feel' setting defines the color space conversion method..
Page 234
234 chapter 7 print quality and print productivity what is color feel? [89] 'color feel' description 'océ cad colors' use this setting to get a print with bright, saturated colors. Advised for vector drawings (like hp-gl). All primary and secondary colors are clean, because they are printed with pur...
Page 235
235 what is color feel? * the output quality of a simulated non-océ printer setting depends on the selected input profile for simulated printers. Make sure you use the correct input profile for simulated printers. Océ colorwave ™ 600 path: support - input profiles. 'simulated non-océ printer: no col...
Page 236: What Is Rendering Intents?
236 chapter 7 print quality and print productivity introduction what is rendering intents? Introduction normally the color space of a print file is larger than the océ colorwave ™ 600 color space. In other words, the input color space is larger than the output color space. Consequently some of the d...
Page 237
237 rendering intents: 'perceptual (photo)' rendering intents: 'perceptual (photo)' [90] this setting optimizes the output to produce best results for photos, artwork, gis or images. Perceptual rendering tries to preserve some relationship between out of gamut colors, even if this results in inaccur...
Page 238
238 chapter 7 print quality and print productivity rendering intents: 'saturation (business graphics)' rendering intents: 'saturation (business graphics)' [91] this setting optimizes the output of bright, saturated colors. Saturation rendering intent preserves saturated colors, and is advised if you...
Page 239
239 rendering intents: 'relative colorimetric' rendering intents: 'relative colorimetric' [92] relative colorimetric keeps an almost exact relationship between in gamut colors, even if this clips out of gamut colors. The relative colorimetric rendering method replaces the colors to align the old whi...
Page 240
240 chapter 7 print quality and print productivity rendering intents: 'absolute colorimetric' rendering intents: 'absolute colorimetric' [93] absolute colorimetric is similar to relative colorimetric, but uses a different method to handle the white point. Absolute and relative colorimetric both keep...
Page 241: What Is An Output Profile?
241 what is an output profile? What is an output profile? The output profile is used to adjust the converted cmyk color space, depending on the output device (via the océ colorwave ™ 600 printer calibration module) and the media type you select (via the omp océ media profile file). The output profil...
Page 242
242 chapter 7 print quality and print productivity 'color management' settings in the océ express webtools 'color management' settings in the océ express webtools depending on the type of file you want to print, the océ colorwave ™ 600 offers different color-information conversions. You can select t...
Page 243
243 color management settings and job submission color management settings and job submission the way in which you submit a print job to the printer defines in most cases the file type of the document. If you use a printer driver, the original file type will be changed by the driver into a standard ...
Page 244
244 chapter 7 print quality and print productivity color management settings and job submission [94] job submission method file type color management settings océ windows ® printer driver the driver converts all files into hp-gl/2 you can define the color settings in: ■ the printer driver. ■ the océ...
Page 245
245 priorities in the color management settings priorities in the color management settings when you want to print a document in color on the océ colorwave ™ 600 the color information that is defined in the files can be set in the different steps of the process from document creation to document pro...
Page 246
246 chapter 7 print quality and print productivity priorities in the color management settings [95] stages in the process of making a color print priority document the color settings are already embedded in the document (only applicable for pdf files). 1 application the color settings can be defined...
Page 247
247 priorities in the color management settings note: it is advised to align the color management settings that have been made in the different stages before you start the print job. The color space of the document and the settings for the print have to match. This means that if you have set the col...
Page 248
248 chapter 7 print quality and print productivity default settings 'for hp-gl, hp-gl/2 and hp-rtl files' default settings 'for hp-gl, hp-gl/2 and hp-rtl files' the default settings are emphasized. [96] * the output quality of a simulated non-océ printer setting depends on the selected input profile...
Page 249
249 default settings 'for tiff and jpeg files' (rgb input) default settings 'for tiff and jpeg files' (rgb input) the default settings are emphasized. [97] * the output quality of a simulated non-océ printer setting depends on the selected input profile for simulated printers. Make sure you use the ...
Page 250
250 chapter 7 print quality and print productivity default settings 'for tiff and jpeg files' (cmyk input) default settings 'for tiff and jpeg files' (cmyk input) the default settings are emphasized. [98] * the output quality of a simulated non-océ printer setting depends on the selected input profi...
Page 251
251 default settings 'for postscript and pdf files' (rgb input) default settings 'for postscript and pdf files' (rgb input) the default settings are emphasized. [99] * the output quality of a simulated non-océ printer setting depends on the selected input profile for simulated printers. Make sure yo...
Page 252
252 chapter 7 print quality and print productivity default settings 'for postscript and pdf files' (cmyk input) default settings 'for postscript and pdf files' (cmyk input) the default settings are emphasized. [100] * the output quality of a simulated non-océ printer setting depends on the selected ...
Page 253: Print Examples
253 your océ print quality advisor print examples your océ print quality advisor introduction get the best out of your océ colorwave ™ 600! Your océ print quality advisor is available as a demo print on the printer operator panel. The océ print quality advisor gives an overview of different types of...
Page 254
254 chapter 7 print quality and print productivity your océ print quality advisor how to print the océ print quality advisor [101] step action remarks 1 from the 'home' screen on the printer operator panel select the 'system' tab. [269] 2 select the 'maintenance' tab with the upper left softkey. [27...
Page 255
255 your océ print quality advisor result the océ print quality advisor is printed on a1 format. 5 press 'finish' to print the océ print quality advisor. [273] 6 select ' back' and 'home' to revert to the 'home' screen. [274] step action remarks.
Page 256: 2D Cad Monochrome
256 chapter 7 print quality and print productivity 2d cad monochrome 2d cad monochrome [275] océ print quality advisor note: for optimal print quality please verify that the name of the loaded media corresponds with the media name on the printer operator panel. [102] setting advised value advised re...
Page 257: 2D Cad Color
257 2d cad color 2d cad color [276] océ print quality advisor note: for optimal print quality please verify that the name of the loaded media corresponds with the media name on the printer operator panel. [103] setting advised value advised rendering intent value 'color mode' 'color' 'print setting'...
Page 258: 2D Cad and Rendering
258 chapter 7 print quality and print productivity 2d cad and rendering 2d cad and rendering [277] océ print quality advisor note: for optimal print quality please verify that the name of the loaded media corresponds with the media name on the printer operator panel. [104] setting advised value advi...
Page 259: Map
259 map map [278] océ print quality advisor note: for optimal print quality please verify that the name of the loaded media corresponds with the media name on the printer operator panel. [105] setting advised value advised rendering intent value 'color mode' 'color' 'print setting' 'océ print assist...
Page 260: Logo and Business Colors
260 chapter 7 print quality and print productivity logo and business colors logo and business colors [279] océ print quality advisor note: for optimal print quality please verify that the name of the loaded media corresponds with the media name on the printer operator panel. [106] setting advised va...
Page 261: Point of Sales Graphics
261 point of sales graphics point of sales graphics [280] océ print quality advisor note: for optimal print quality please verify that the name of the loaded media corresponds with the media name on the printer operator panel. [107] setting advised value advised rendering intent value 'color mode' '...
Page 262: Consumer Graphics
262 chapter 7 print quality and print productivity consumer graphics consumer graphics [281] océ print quality advisor note: for optimal print quality please verify that the name of the loaded media corresponds with the media name on the printer operator panel. [108] setting advised value advised re...
Page 263: Photo
263 photo photo [282] océ print quality advisor note: for optimal print quality please verify that the name of the loaded media corresponds with the media name on the printer operator panel. [109] setting advised value advised rendering intent value 'color mode' 'color' 'print setting' 'océ print as...
Page 264: Photo Realistic Impression
264 chapter 7 print quality and print productivity photo realistic impression photo realistic impression [283] océ print quality advisor note: for optimal print quality please verify that the name of the loaded media corresponds with the media name on the printer operator panel. [110] setting advise...
Page 265: Mixed Content
265 mixed content mixed content [284] océ print quality advisor note: for optimal print quality please verify that the name of the loaded media corresponds with the media name on the printer operator panel. [111] setting advised value advised rendering intent value 'color mode' 'color' 'print settin...
Page 266: Business Graphics
266 chapter 7 print quality and print productivity business graphics business graphics [285] océ print quality advisor note: for optimal print quality please verify that the name of the loaded media corresponds with the media name on the printer operator panel. [112] setting advised value advised re...
Page 267: 3D Cad
267 3d cad 3d cad [286] océ print quality advisor note: for optimal print quality please verify that the name of the loaded media corresponds with the media name on the printer operator panel. [113] setting advised value advised rendering intent value 'color mode' 'color' 'print setting' 'océ print ...
Page 268: Problems of Print Jobs
268 chapter 7 print quality and print productivity banding across the print with differences in color and gloss check, analyze and solve output quality problems of print jobs banding across the print with differences in color and gloss description of the problem your print contains a banding across ...
Page 269
269 banding across the print with differences in color and gloss how to solve the problem 1. Check if the media name on the 'printer operator panel' matches the media that you currently use. 2. Activate the 'production plus ' setting for the production mode or switch from the 'production' mode to th...
Page 270
270 chapter 7 print quality and print productivity horizontal, wavy lines across your print horizontal, wavy lines across your print description of the problem your print contains horizontal, wavy lines across the media. These light or dark lines ■ appear in all colors ■ can vary in thickness from l...
Page 271
271 horizontal, wavy lines across your print [116] illustration [288] [288] example of horizontal, wavy lines across the customer acceptance test how to solve the problem 1. Check if the correct media setting is used. 2. Check if the media name on the printer operator panel matches the media that yo...
Page 272
272 chapter 7 print quality and print productivity thin horizontal, colored or white lines across your print thin horizontal, colored or white lines across your print description of the problem your print has one of the following problems. ■ thin horizontal, colored lines in the multiple color areas...
Page 273
273 thin horizontal, colored or white lines across your print [117] how to solve the problem 1. Check if the system compensates for the nozzle dropout during the next swath. 2. If the system does not compensate for the nozzle dropout, you must print the customer acceptance test. 3. Check the colored...
Page 274: Calibrate The Océ Colorwave
274 chapter 7 print quality and print productivity calibrate the océ colorwave ™ 600 printer calibrate the océ colorwave ™ 600 printer when to do note: only roll position 1 can be used for calibrations. Note: use only océ 'media' for reliable calibrations. Note: the printer will do the calibration a...
Page 275
275 calibrate the océ colorwave ™ 600 printer 3 use the 'scroll wheel' to select 'calibration' and confirm with the 'confirmation key' (above the 'scroll wheel'). [292] 4 the wizard assists you to do a calibration. Press 'next ' to start the calibration. [293] 5 now you can select: ■ paper length ca...
Page 276
276 chapter 7 print quality and print productivity calibrate the océ colorwave ™ 600 printer result evaluate the customer acceptance test print. Check if the print does not show any of the following output quality problems: ■ banding across the print with differences in color and gloss on page 268 ■...
Page 277: Error Codes
277 error codes error codes when to do note: error-codes are only displayed at the 'printer operator panel'. Before or during the calibration, it is possible that the calibration failed. In that case, you will be informed immediately through an error code on the 'printer operator panel'. Overview er...
Page 278
278 chapter 7 print quality and print productivity error codes.
Page 279: Chapter 8
279 chapter 8 license management.
Page 280
280 chapter 8 license management introduction to managing licenses introduction to managing licenses introduction the océ applications and options are protected against unauthorized use. You need to activate the license to enable an application or option for use. The 'support' - 'licenses' tab in th...
Page 281
281 the 'licenses' tab in the océ express webtools the 'licenses' tab in the océ express webtools introduction the 'support' - 'licenses' tab has the following possibilities. Possibilities ■ view the current active licenses ■ get the host id of the océ system ■ save the active licenses ■ perform a l...
Page 282
282 chapter 8 license management the basic workflow of 'support' - 'licenses' activation the basic workflow of 'support' - 'licenses' activation introduction before you can work with licenses, you must access the home page of the océ express webtools. The following workflow describes per step when t...
Page 283: Océ License Logic
283 océ license logic océ license logic introduction when you navigate to the 'support' - 'licenses' tab in the océ express webtools, you get access to the océ license logic application. Before you can work with licenses, you must access the home page of the océ. The following workflow describes per...
Page 284
284 chapter 8 license management the structure of license files and licenses the structure of license files and licenses introduction a license file contains a license per option of your océ system. You can view the current active licenses with océ 'support' - 'licenses' tab in the océ express webto...
Page 285
285 the structure of license files and licenses preview the resale licenses during the license activation job if you use the license file that contains the resale licenses. You see the following. ■ all current active resale licenses ■ all new active resale licenses. Note: you can not see the current...
Page 286: Check Your Licenses
286 chapter 8 license management check your licenses check your licenses about the licenses the 'support' - 'licenses' tab in the océ express webtools allows you to manage the licenses that are active on your system. A license is needed to activate certain functions on your océ colorwave ™ 600. You ...
Page 287
287 check your licenses [122] information description 'option' this field displays the name of the option. For océ colorwave ™ 600 the following licenses are available. ■ océ colorwave ™ 600 base license. ■ adobe ® postscript 3 / pdf. ■ japanese postscript fonts. ■ simplified chinese postscript font...
Page 288
288 chapter 8 license management save the currently active licenses save the currently active licenses introduction you can save all current active licenses of different licenses types into one single file. Purpose save the current active licenses for the following purposes. ■ collect and save all a...
Page 289: Get A New License
289 get a new license get a new license introduction the océ applications and optional functions are protected against unauthorized use. You need to activate the license to enable an application or optional function for use. The 'licenses' tab enables you to upload new license files to activate a li...
Page 290
290 chapter 8 license management get a new license result ■ if you have updated an expired license, the new license file overwrites the previous license file. ■ if you have uploaded a new license, the license state in the overview is changed from 'not authorized' to 'authorized'..
Page 291: Appendix A
291 appendix a specifications of the océ colorwave ™ 600
Page 292: Controller '
292 appendix a specifications of the océ colorwave ™ 600 specifications 'océ powerm controller'/'océ powerm plus controller ' specifications 'océ powerm controller'/'océ powerm plus controller ' 'océ powerm controller' hardware [123] 1 : for an average file size of 100 mb per a0. Topic 'océ powerm c...
Page 293
293 specifications 'océ powerm controller'/'océ powerm plus controller ' [124] 'océ powerm controller' software the océ powerm controller software consists of a basic module and a print module. [125] [126] platform océ controller with real-time os standard interface 10/100/1000base-t with rj45 netwo...
Page 294
294 appendix a specifications of the océ colorwave ™ 600 specifications 'océ powerm controller'/'océ powerm plus controller ' color management supported on the controller (océ express webtools). 'color feel' ■ 'océ cad colors' ■ 'océ enhanced colors' ■ simulated printer (simulation of océ and non- o...
Page 295: 600 Printer
295 specifications océ colorwave ™ 600 printer specifications océ colorwave ™ 600 printer [127] technology 'océ crystalpoint ™ ' technology. Océ own developed 'imaging devices' and 'océ tonerpearls ™ '. Instant dry print technology. 'imaging carriage' and 'imaging devices' [cmyk] carriage that conta...
Page 296
296 appendix a specifications of the océ colorwave ™ 600 specifications océ colorwave ™ 600 printer demofiles the system will standard have 3 demofiles on the 'océ powerm controller'. One for 'economy', one for 'production' and one for 'presentation'. The files are designed to show both quality of o...
Page 297
297 specifications océ colorwave ™ 600 printer media sources / ergonomics multiple front loadable rolls. Multi-roll media feeding. 1 - 6 rolls (free configurable). [299] [299] media drawer that contains the media roll 1 and/or 2. Roll maximum load weight per position roll maximum load weight per pos...
Page 298
298 appendix a specifications of the océ colorwave ™ 600 specifications océ colorwave ™ 600 printer output delivery 'top delivery tray' (standard) 'receiving rack (basket)' (option) folder (option) output sizes width ■ din: from a4 (landscape) to a0, 42", 36", a1 and b2 ■ ansi: from 11" to 42" (incl...
Page 299
299 preferred océ media types and sizes preferred océ media types and sizes introduction océ machines and media are matched for the best quality and performance. Océ advises only approved océ media. You can receive a full list of the océ media that you can use in your printer (that includes plain pa...
Page 300
300 appendix a specifications of the océ colorwave ™ 600 preferred océ media types and sizes [129] [130] [131] note: visit océ on the internet at www.Oce.Com for the latest information. [129] preferred media types - europe - transparent papers media code description g/m 2 , mil or mu core name on th...
Page 301
301 preferred océ media types and sizes note: to make sure that your print quality is optimal you can download the omp-file (océ media profiles-file) with the right media code from the océ website for all media types. Media types - usa the following preferred media types are available for the océ co...
Page 302
302 appendix a specifications of the océ colorwave ™ 600 supported non-océ media types and sizes supported non-océ media types and sizes introduction océ machines and media are matched for the best quality and performance. However, océ provides a limited number of media profiles for non-océ media ty...
Page 303
303 supported non-océ media types and sizes [134] [135] [136] note: visit océ on the internet at www.Oce.Com for the latest information. Note: the media profiles for non-océ media types are generic media profiles that give the best possible result for a variety of the specified non-océ media types. ...
Page 304
304 appendix a specifications of the océ colorwave ™ 600 supported non-océ media types and sizes media sizes [137] maximum minimum media width 42 inch 297 millimeters 11 inch roll length 200 meters not applicable.
Page 305: Preferred Océ Laminates
305 preferred océ laminates preferred océ laminates introduction océ machines and media are matched for the best quality and performance. Océ advises only approved océ media. You can receive a full list of the océ media that you can use in your printer (that includes plain paper, transparent paper, ...
Page 306
306 appendix a specifications of the océ colorwave ™ 600 specifications drivers and job submission software specifications drivers and job submission software océ drivers [139] note: visit océ on the internet at www.Oce.Com for the latest information. Optional application software [140] software env...
Page 307: Appendix B
307 appendix b reader's comment sheet.
Page 308: Reader'S Comment Sheet
308 appendix b reader's comment sheet reader's comment sheet reader's comment sheet questions have you found this manual to be accurate? O yes o no were you able to operate the product, after reading this manual? O yes o no does this manual provide sufficient background information? O yes o no is th...
Page 309
309 reader's comment sheet date: this reader's comment sheet is completed by: (if you prefer to remain unknown, please do fill in your occupation) name: occupation: company: phone: address: city: country: please return this sheet to: océ-technologies b.V. For the attention of itc user documentation....
Page 310
310 appendix b reader's comment sheet reader's comment sheet.
Page 311: Appendix C
311 appendix c addresses of local océ organizations.
Page 312
312 appendix c addresses of local océ organizations addresses of local océ organizations addresses of local océ organizations [141] océ-australia ltd. P.O. Box 363 ferntree gully mdc vic 3165 australia http://www.Oce.Com.Au/ océ-Österreich gmbh postfach 95 1233 vienna austria http://www.Oce.At/ océ-...
Page 313
313 addresses of local océ organizations océ-hungaria kft. 1241 budapest pf.: 237 hungary http://www.Oce.Hu/ océ-ireland ltd. 3006 lake drive citywest business campus saggart co. Dublin ireland http://www.Oce.Ie/ océ-italia s.P.A. Strada padana superiore 2/b 20063 cernusco sul naviglio (mi) italia h...
Page 314
314 appendix c addresses of local océ organizations addresses of local océ organizations note: the web site http://www.Oce.Com gives the current addresses of the local océ organizations and distributors. Note: the addresses of local océ organizations for information about the wide format printing sy...
Page 315: Index
315 index index a about licenses . . . . . . . . . . . . . . . . . . . . . . . . . 97 , 286 absolute colorimetric rendering intents . . . . . . . . . . . . . . . . . . . . . 240 action after media request time-out configuration . . . . . . . . . . . . . . . . . . . . . . . 104 activate system monito...
Page 316
316 index media request time out . . . . . . . . . . . . . . . . 104 network settings . . . . . . . . . . . . . . . . . . . . . 112 network settings in the océ express webtools 109 configuration tab océ express webtools . . . . . . . . . . . . . . . . . 84 configure network settings manually . . . ....
Page 317
317 index e economy print setting . . . . . . . . . . . . . . . . . . . . . . . . 219 energy save modes configuration . . . . . . . . . . . . . . . . . . . . . . . 106 error codes overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 277 errors cover or drawer opened . . . . . . . . . . . ....
Page 318
318 index save the license information . . . . . . . . .99 , 288 set the 'oce print assistant behavior' . . . . . 221 set the alignment mode . . . . . . . . . . . . . . . . 226 set the automatic roll switch . . . . . . . . . . . . 223 set the color mode . . . . . . . . . . . . . . . . . . . . 218 se...
Page 319
319 index job submission . . . . . . . . . . . . . . . . . . . . . . 180 m mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 main settings print quality . . . . . . . . . . . . . . . . . . . . . . . . 219 main settings that influence the print quality . . 216 mains supply ca...
Page 320
320 index print setting . . . . . . . . . . . . . . . . . . . . . . . . . 219 oce print assistant behavior . . . . . . . . . . . . . . 221 océ publisher express job submission . . . . . . . . . . . . . . . . . . . . . . 171 océ publisher select job submission software . . . . . . . . . . . . . . . 1...
Page 321
321 index print the customer acceptance test (cat) demo print how to . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 print the océ print quality advisor how to . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254 print width margin tolerance . . . . . . . . . . . . . . 119 pr...
Page 322
322 index roll holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 roll loader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 rotation . . . . . . . . . . . . . . . . . . . . . . . . . . .118 , 225 run the installation wizard . . . . . . . . . . . . . . . . . . 49 h...
Page 323
323 index t tac . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 , 84 the océ print quality advisor demo print . . . . . . . . . . . . . . . . . . . . . . . . . 253 the output delivery . . . . . . . . . . . . . . . . . 136 , 207 tiff and jpeg . . . . . . . . . . . . . . . . . . . . ....
Page 324
324 index.