Oce PlotWave 900 Specifications

Océ 

Double Decker

Pro stacker

Rising Above

Stack more prints, save precious time

Make your plotter workflow even more productive with the Océ Double Decker 

Pro stacker. This high volume stacker can store up to 1500 sheets on two trays. 

It works seamlessly with your Océ plotter to allow unattended operation. To 

streamline your workflow automatic operation can be configured to match the 

way you work.

Fast, high capacity stacker

Prints from your plotter are automatically 

stacked in neatly aligned piles at very high 

speeds. Two separate trays can hold up to 

750 sheets per tray. This enables your plotter 

to run unattended. If one tray is full, prints 

are automatically sent to the other tray. If 

both trays have reached their maximum 

capacity, an audio signal will notify the 

operator to remove the prints.

Easy tray selection

There are two ways to select the destination 

for your stacked output. You can use the 

manual switch to stack your output on the 

upper or lower tray, or you can set it to auto-

matic. If it is set to automatic the system 

will choose the tray automatically, allowing 

you to switch trays between each job or set. 

This way you can take out a set for finishing 

without disturbing the printing process.

Convenient, unattended 

operation

Your Océ plotter works seamlessly with

the Océ Double Decker Pro stacker

to allow unattended operation. When

running in continuous mode it will

switch trays automatically when one tray

is full. In addition, the printer will stop

automatically when the trays are full to

avoid wasting time and resources.

Quiet and compact

The Océ Double Decker Pro stacker runs 

very quietly to make working conditions as 

comfortable as possible. The stacker takes up 

a small amount of floor space so it can easily 

fit into offices with limited space. This makes 

it easy to upgrade your Océ PlotWave 900 or 

Océ TDS750 plotter with the Océ Double 

Decker Pro.