Ocean Rodeo Sle Kite Manual - Ocean Rodeo Sle Kite.
• Carefully work your way towards kite. If your lines are
severely twisted, work in short segments starting near
the loose end working away from the bar.
• Unwinding lines directly into the wind stops the lines
from twisting together.
• Always remove seaweed from lines as it dries and can
cause tangles.
• be sure there are no knots in your flying lines as
they create a weak point!
aTTachINg fLYINg LINES To YouR
ocEaN RodEo SLE KITE.
1. Before you attach your lines have your kite pumped up
leading edge down and weighted with sand or gravel.
2. Your flat kite has two front line attachments and two
back line attachments supported by line bridles, locate
these line attachment points.
• Front line attachment pigtails are located about 1/4
of the way up from the wing tip on the leading edge
tube. [6]
• Rear line attachment lark’s head connectors are
located at the very tip of the leading edge tube. [7]
3. With the front and back attachment points free from
their Velcro storage tabs pull the pigtails / lark’s head
connectors forward so that the bridles are in clear
view.
12
6
7