Ocean Rodeo Sle Kite Manual - page 24
of
28
LEadINg EdgE bLaddER REmovaL
1 Get two lines each approximately 2/3 the length of the
leading edge tube
2 Open the Velcro at the tip of both ends of the LE tube.
Gently pull a bit of the bladder out and tie one line each
to the 2 ends of the bladder [15]
3 Have a friend hold the wingtip (or use weight)
4 Detach clamps and tubing from LE.
5 Gently push the two valves into the leading edge tube
[16]
6 Open the zipper and gently remove the bladder [17]
7 Disconnect the lines from the bladder but be sure to
leave them threaded in the LE tube.
8 (see Bladder Repairs above)
24
13
14
12