Ocean Signal PLB1 User Manual - page 6
PLB1 USER MANUAL
6
Part No 912S-01260
2.
PLB1 OVERVIEW
1)
Antenna rewind knob
2)
Antenna pull grip
3)
Strobe light
4)
Indicator LED
5)
ON key (under flap)
6)
TEST key (under flap)
7)
Lift up flap
8)
Lanyard fixing (on rear of case)
The PLB is supplied with a clear label to protect the UIN information on the rear of the
product. Please fit this before use.
The unique cradle mounting system
allows the PLB to be easily attached
to a belt, clothing or other
protective equipment. Simply fit the
rubber strap around the mounting
point and attach to the cradle as
shown.
The cradle then clips to the PLB at
the four fixing points.
The PLB can also be carried in the
supplied flotation pouch. Secure
the pouch to your clothing using the
belt loop on the rear of the pouch.
Once affixed using the cradle or pouch, the PLB should be securely tethered to your
person or clothing using the supplied lanyard. This will guard against accidental
loss if the PLB is unknowingly removed from its housing.
1
7
8
2
3
4
5
6