Octava HD41-ARC Installation Manual - Usb Service Port:
9
USB Service Port:
The USB port is for service and updates if needed. Contact us if you
need service.
Set the switch to USB/Program side as
shown.
Smart Scan
TM
:
Smart Scan
TM
will automatically switch to the HDMI input source
when the input source is turned on and detected. If no HDMI sources
are detected, then the switch will go into standby mode. The Scan is
ON as default.
Turning Scan OFF:
In the event that you wish to Turn OFF the Smart Scan
feature please follow these steps:
To Disable Scan
1
Connect Power to the
switch
2
Press and hold down the HDMI
select AND Toslink Audio Select
Button for 5 seconds until LED
display shows 0
3
Done. Scan is now
turned off
Turning Scan ON:
You can turn the Smart Scan feature back on by simply
recycling the power to the switch. This will enable the
Smart Scan feature.
8