1. DL manuals
  2. Octava
  3. Matrix Switcher
  4. HDHC48MX-V1.3
  5. Installation Manual

Octava HDHC48MX-V1.3 Installation Manual

Other manuals for HDHC48MX-V1.3: Installation manual
Manual is about: 4x4 HD over Car 6

Summary of HDHC48MX-V1.3

  • Page 1

    1 installation guide model: hdhc44mx-v1.3.

  • Page 2: Contents

    2 contents application diagram ........................................................ 3 features .......................................................................... 3 configuring smart scan tm ................................................ 4 installation .....................................

  • Page 3: Application Diagram

    3 application diagram features: watch any 4 hd programs simultaneously on 4 displays! V1.3, 1080p 4 hdmi inputs 4 hdmi outputs 4 cat 5/6 ethernet outputs matrix allows 256 viewing combinations 1 ru mountable rs-232 control works with hdmi or dvi-d, hdcp-enabled hdtv supports high resolution video 48...

  • Page 4: Configuring Smart Scan

    4 configuring smart scan tm : the smart scan is disabled before shipment. It is recommended to leave smart scan disabled in most applications. To enable the smart scan tm 1) set the configuration switch #1 to the up position. 2) re-power the matrix. To disable smart scan tm 1) set the configuration ...

  • Page 5: Front View

    5 front view back view switch number 1 2 3 4 name smart scan switch edid switch edid switch programming/lock switch function enable/disable smart scan edid mode select edid mode select programming/lock. Down = smart scan off up= smart scan on down= edid programming mode up= locked display led indica...

  • Page 6: Front Panel Control:

    6 front panel control: source selection: you may use the front panel buttons to select the sources connected to each display. For example, to set display a to input 2. Simply press and release the a display button until the led shows 2..

  • Page 7: Receiver

    7 connecting using cat 5/6 outputs: 1) connect cat5e -1 of the hdmi matrix and receiver with cat5e/6 cable. 2) connect cat5e -2 of the hdmi matrix and receiver with cat5e/6 cable. 3) connect the i.R. Receiver cable (optional) to the i.R. Of hdmi ethernet receiver unit. 4) connect the i.R. Transmitte...

  • Page 8: Remote Control Guide:

    8 remote control guide: using the remote: use the remote control to select the display that you wish to control followed by the input (dvd, settop) that you wish to watch. For example: -pressing “c4” will switch input “4” to hdmi out “c”. Pressing on/off turns on/off the hdmi matrix pressing led tur...

  • Page 9: Edid Configuration:

    9 edid configuration: the matrix can be configured to 4 edid settings. It is recommended to keep the edid in the default factory mode 1. To change the edid settings, please see section “changing edid settings ” for programming instructions. Mode video audio description switch settings 1 480p,720 i/p...

  • Page 10: Changing Edid Mode:

    10 changing edid mode: it is recommended to keep the edid in the factory default mode1. If necessary, you may set to different edid mode by following these instructions. Step action notes 1 set the smart scan switch to off 2 disconnect all sources and display from matrix 3 set the progam/lock switch...

  • Page 11

    11 7 press the a button on the front panel. Led will count from 000 to 100 while programming. Led will count from 000 to 100 while programming. 8 wait. Programming is complete when led indicates “1” 9 set to lock position 10 connect all video sources and displays and turn on 11 re-power the matrix..

  • Page 12: Rs-232 Control Commands

    12 rs-232 control commands the octava 4x4 hd - cat 5/6 matrix switch can be easily integrated with 3 rd party control systems via rs232 control. The following shows the control protocol for controlling the hdhc44mx. Rs-232 protocol baud rate 9600 data bits 8 parity check none stop bits 1 flow contro...

  • Page 13: Switching Commands

    13 switching commands note: the commands are in hex. No spaces between hex codes. Output a switching commands hex code select out a to input port 1 0x02 0x32 0x31 0x31 0x03 select out a to input port 2 0x02 0x32 0x31 0x32 0x03 select out a to input port 3 0x02 0x32 0x31 0x33 0x03 select out a to inp...

  • Page 14: 1 Ru Rackmount :

    14 1 ru rackmount : the octava 4x4 hd - cat 5/6 matrix switch can be installed in a 1 ru rack by simply installing the rack mounts included. Disabling /enabling front panel ir remote receiver: to disable the front panel ir remote receiver-insert the plastic plug into the ir jack as shown. Front pane...

  • Page 15

    15 i.R. Remote control over cat 5/6: ir remote signals can be carried over the cat 5/6 cables to control the 1) matrix and 2) video sources. 1) connect the ir receiver cable to the cat 6/hdmi receiver as shown above 2) connect the ir transmitter cables to the matrix ir tx 1-4 as shown above. 3) plac...

  • Page 16

    16 warranty octava warrants the equipment purchased to be free from defects in material and workmanship under normal use and service for a period of 1 year. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 1 year from the date of receipt. If octav...

  • Page 17: Description

    17 rev.D description specifications model hdhc44mx-v1.3 hdmi inputs 4 hdmi outputs 4 rj-45 cat 5/6 output 4 version 1.3 hdcp yes in/out connectors 19 pin hdmi female type-a rs-232 control port 1 display selection remote, manual, smart scan,rs-232 video resolution 480 p, 720 i/p, 1080 i/p video data ...