Octava HDMX42-V1.3 Installation Manual - page 6
Pressing +/-
Increments/Decrements
to the next available
Source.
5
Remote Control Guide:
Octava’s Remote control uses discrete code so can be easily
integrated with most Universal Remote Controls such as Logitech’s
Harmony.
EDID Configuration:
The Matrix can be configured to 3 EDID settings.
It is recommended to keep the EDID in the default factory mode 1.
Button Function Notes
+, -
Increments/Decrements to the next
available Source
1,2,3,4 Selects
the
corresponding numbered
source.
Turns ON/OFF the LED light.
Turns ON/OFF the HDMI switch
Other
Not used
Mode Video
Audio
Description
Switch
settings
1 480I,720I/P,
1080I/P
PCM,
Bitstream
(Dolby
Digital, DTS)
Default
Mode
2 480I,
720I/P,
1080I/P.
Reads EDID of
all monitors
and sets to :
Video=min.
Resolution of
displays
connected.
PCM, Bitstream
(Dolby Digital,
Dolby Tru
HD,DTS,DTS
Master Audio)
Read EDID
from Monitor
and AV receiver
connected and
set AUDIO to
Maximum
capability.
Parsing/
Read Mode
3 480I,720I/P,
1080I
2 CH PCM
Basic Mode
5
Pressing ON/OFF
Turns On/Off the
HDMI switch
Pressing LED
Turns on/off the
Blue LED light.
Pressing 1-4
Selects the
corresponding
numbered source.
10
Pressing A-D
Selects the Display
to be controlled.