Octava HDMXA71 Pro HD Home Theater Series Installation Manual - Back View
7
1. Power input (5VDC)
5. Optical
audio
out
3. HDMI Inputs
8. RS232
2. HDMI output A and B
6. Aux 2 CH Audio In
4. Analog 7.1 out
7. LAN/Telnet
8. RS232
10. EDID
switch
Back View
*Note 1: Analog output supports only LPCM audio format. Unit does NOT decode Dolby or
DTS.
Note 2: You must set your PS3, or source to LPCM mode in order to use the Analog Audio
Output from HDMI.
Note 3: Aux Input port allows connecting a 2nd analog audio source and "loop thru " to the
Analog Audio Output. Does not convert Analog Audio to HDMI .
Back Side Connectors
Function
1
Power In
5V DC
2
HDMI Outputs A/B
Connect High Speed HDMI cables
to AVR or Display device.
3
HDMI Inputs
Connect High Speed HDMI cables
to Source device.
4
7.1 Analog Audio Output
Connect to Audio Amp/receiver.
Note 1,2
HDMI Mode
Analog Audio Output is from the
selected HDMI source.
Note 1,2
Aux Input Mode ( Loop
Thru)
Analog Audio Output is from the
(see 6) connected analog audio
connection.
Note 3.
5
Optical Digital Output
Audio will play the Out A source
selection.
6
Aux 2ch audio input
- Routes the 2 CH Analog Audio
Input to Front L/R Analog Audio
Output. Routes from 6 to 4.
Note 3.
7
LAN/Telnet
For LAN Control port for controlling
the matrix via Telnet Commands
8
RS-232
For external control of Matrix via PC
or 3rd party Control system.
9
USB Port
for custom EDID/ code updates
10
EDID Mode Switch
Allows selection of various EDIDs
9. USB Port
AUX audio indictor led will illuminate when
Aux input Mode (Loop thru) is selected