Odys X10 User Manual - page 18
ODYS X10
18
EN
Parameters of the system setup options
z
Recording time: Setting up the date/time for recording the saving file.
1.
Press Mode to enter the interface of recoding time;
2. Press to change the figures;
3.
Press VOL to skip to the last/next frame;
4.
Exit by press Mode after completing the regulation;
z
Screen setup
1.
Brightness regulating: Regulating the brightness of the screen (0--7);
2.
Black Screen Mode: Setting up a back screen period (0-30);
3. Exit
z
Language selections: Chinese simplified, English, Chinese
Traditional, Japanese, Korean, French, German, Italian, Dutch,
Portuguese, Spanish, Swedish, Czech, Danish, Polish, Russian and
Turkish.
z
Off Configuration (configure a counting down time and the player will
be off automatically then)
z
Power-saving mode: It works only in the stopping mode. (0-60s); 0
represents that this function is off.
z
Sleep mode: It works in any mode. (0-120s); 0 represents that this
function is off.
z
Interface option: Static interface; dynamic interface
z
Re-reading configuration: Manu/Auto
PC connection mode: As some operational systems (Version Windows
2000/Sp4 or before) don’t support attaching two disc symbols) to one
USB disc, it is required to select which disc should be used currently
when a multiple space function has been adopted, i.e. “Connecting
multiple discs, single common disc and single and encrypted disc”, so
that the selected disc can be shown when the player is connected to a
PC.
z
Memory condition: Check memory and the Service condition of service
(The percentage shows the ratio of the used space)
z
Firmware version: showing the player’s firmware version currently
used
z
Firmware upgrading: used interface of upgrading the firmware. You
should enter this interface first when you upgrade this firmware.
Exit: exiting from the menu.