Og8020 assembly instructions failure to follow instruction manual can void warranty.
Og8020 instruction manual step 2: open box 1 and remove all the packing materials. Then take the base out of the box and get rid of the plastic bag which covers the base. As pictured below. Box 2: backrest box 1:the base box 3: side boards step 1: og8020 massage chair arrives in three boxes. The bas...
Step 4: step 5: cut the cable tie, used for shipping, securing the backrest actuator. Remove the protective material which wrapped on the head of backrest actuator. Remove the cotter pin and bolt and set aside. As pictured below. Remove the protective material. Remove the cotter pin and bolt and set...
Step 9: locate connector on pcb tray.Securely attach the backrest harness to pcb tray and lock it by screws on the connector. Step 10: recline the backrest until it locks into position. The air hose must upward. Locate the connecter on the inflator pump box. Step 8: push the backrest forward and let...
Step 13: step 12: connect the air hose and then the wire harness to their appropriate connectors. Carefully attach the side board onto the base. Align and insert the two metal bars on the base into the holes under the metal plate. As pictured below. Use two screws to attach the side board and close ...
. Step 16: connect the chair to power supply, turn on the power switch. Then you can enjoy your massage chair. . Locate the power switch step 15: attach the tablet holder onto right side armrest. Then attach the tablet cover onto the holder. As pictured below..
