OHAUS EXPLORER PRO Instruction Manual - 1. Introduction
Explorer
Pro
EN-3
1. INTRODUCTION
1.1 Description
Thank you for deciding to purchase an Explorer Pro
®
Balance from Ohaus. Explorer
®
Pro’s software design allows
direct access to 7 application modes and all menus. The backlit
dot matrix display, is capable displaying either limited or multiple
data fields at each application. Explorer
®
Pro’s optional AutoCal™
automatically calibrates the balance due to temperature changes
that may affect calibration. Panel controls and soft key functions
on the display clearly indicate functions and data. Operation is
extremely simplified, you enter a menu, select an item, modify
the item according to menu selections and exit.
Capacities from 62 grams to 8,100 grams are available. Legal
for Trade versions are also available.
To ensure you make full use of the possibilities offered by your
Explorer
®
Pro balance, we advise you to read through these
operating instructions.
1.2 Features
• Ready to weigh without complicated setup
• 3 soft keys are application mode specific.
• Operating languages include English, Spanish, French,
German and Italian.
• Simplified menu navigation and balance setup.
• Capacity Bar guide and Fill bar guide.
• Flexibility to display either simple weighing results or
more advanced results including piece count, average piece
weight, sample size, tare weight, weight, under and over.
• Dot Matrix display with backlight
• Weighing, Parts Counting, Animal Weighing, Percent
Weighing, Check Weighing, Gross/Net/Tare Weighing and
Filling.
1.3 Safety Precautions
Please follow the safety precautions as listed.
CAUTION:
• Do not operate the balance around corrosive fumes.
• Only use the adapter provided with the balance.
• Do not try to service the Explorer
®
Pro balance.
2. INSTALLATION
2.1 Unpacking
Open the package and remove the instrument and the
accessories. Check the completeness of the delivery. The
following accessories are part of the standard equipment of your
new Explorer
®
Pro balance.
Pan 3.5”, 90mm Round - Analytical 62g, 110g, 162g, 210g,
210/100g
Pan 4.7", 120mm Round - Precision 210g 410g, 510, 610g,
410/100g
Pan 6.8", 152mm Square (0.01 g units) - Precision 610g,
1500g, 2100g, 4100g, 6100g, 4100/1000g
Pan 8", 203mm Square (0.1 g units) - Precision* 6100g,
4100g, 8100g
Draft Shield - Analytical 62g, 110g, 162g, 210g, 210/100g
Draft Shield (0.001g units)- Precision 210g 410g, 610g,
410/100g
Wind Shield (0.01g Units) - Precision 610g, 1550g, 2100g,
4100g, 6100g, 4100/1000g
* 4100 g, 6100 g and 8100 g balances with internal calibration
are equipped with a 6" Pan and Windshield.
The following items are supplied with all balances:
AC Power Adapter, Instruction Manual, Warranty Card, In Use
Cover
• Remove packing material from the instrument.
• Check the instrument for transport damage. Immediately
inform your Ohaus dealer if you have complaints or parts
are missing.
• Store all parts of the packaging. This packaging
guarantees the best possible protection for the transport of your
instrument.