OHAUS ranger 7000 Quick Start Manual
Quick Start Guide Ranger
™
7000
Ohaus Corporation www.ohaus.com
iii
Ranger 7000 Quick Start Guide
Safety Precautions
Caution: Read all safety warnings before installing, making connections, or servicing this
equipment. Failure to comply with these warnings could result in personal injury and/or
property damage. Retain all instructions for future reference.
Verify that the input voltage range printed on the data label and the plug type matches the local AC
power to be used.
Only connect models supplied with a grounded power cord to a compatible grounded power
receptacle.
Do not position the scale such that it is difficult to disconnect the power cord from the power
receptacle.
Make sure that the power cord does not pose a potential obstacle or tripping hazard.
This scale is for indoor use only.
Use the scale in dry locations only.
Do not drop loads on the pan.
Use only approved accessories and peripherals.
Operate the equipment only under ambient conditions specified in these instructions.
Disconnect the equipment from the power supply when cleaning.
Do not operate the equipment in hazardous or unstable environments.
Service should only be performed by authorized personnel.
Installation
Unpacking
Carefully remove your Ranger 7000 scale and each of its components from the package. The included
components vary depending on the scale model (see table below). Save the packaging to ensure safe storage
and transport.
Included Component
Photo
R71MHD3
R71MHD6
R71MD3
R71MD6
R71MHD15
R71MHD35
R71MD15
R71MD35
R71MD60
Terminal
X
X
X
X
Weighing
Base
X
X
X
X
Weighing
Platform
200 x 200 mm
X
Weighing
Platform
240 x 240 mm
X
Weighing
Platform
311 x 371 mm
X
X
Wind Shield
X
Compact
Disc
Instruction
Manual
X
X
X
X