OJ Electronics UCG Quick Manual

1

67101 05/11 (MBC)

Q U I C K   G U I D E 

Introduction

This thermostat can switch on your heating system at predetermined 

times on different days of the week. For each day of the week, you can 

set individual temperatures for 4 periods, called events. The thermostat 

comes with a default schedule suitable for most installations. Unless you 

change the settings, the thermostat will operate in compliance with the 

default schedule. Lowering the temperature when the home is unoccu-

pied will reduce your energy costs without reducing comfort. 

Furthermore, the thermostat features an adaptive function that auto-

matically changes heating period start times so as to ensure that the 

required temperature is reached at the required time.

The full manual 

can be downloaded at:     

WWW.OJ-MICROLINE.COM/INTUITE

Up button

OK button

Down button

On/Off button

Reset GFCI

GFCI test button

FIRST TIME SETTINGS

•  Time and day:

  The first time you turn on the thermostat, time and day must be set. 

The time flashes. Set the current time using the 

Up

 or 

Down

 button. 

Then press the 

OK

 button to confirm the time. The day of the week 

will then flash. Select the current day using the 

Up

 or 

Down

 button. 

Press the 

OK

 button.

•  Select Mode: 

  The thermostat features 3 different modes of temperature control:

  Auto:

Controlled automatically via the 4-event schedule.

  Override:

Change the temperature for a single event.

  Manual:

 Set a temperature manually. 4-event program is 

cancelled.

  Press OK to access Mode and select the required mode using the 

Up

 or 

Down

 button. Press the 

OK

 button. 

•  Select Schedule:

  The weekly 4-event schedule:

  5:2

: Mon-Fri with 4 events/Sat-Sun with 2 events.

  6:1

: Mon-Sat with 4 events/Sun with 2 events.

  7:0

: Mon-Sun with 4 individual events. 

  Press the 

Up

 or 

Down

 button until the 

Schedule

 option flashes. 

Press 

OK

 and then press the 

Up

 or 

Down

 button until the required 

program (

5:2

, 

6:1

 or 

7:0

) flashes. Confirm with 

OK

.

The thermostat is now ready for use.

How to program the thermostat

The thermostat is pre-programmed with a 4-event program, see Fac-

tory Settings below. The program can be adapted individually for the 

following 4-events:

•  when I wake up in the morning 

•  when I am away at work 

•  when I come home 

•  and at night 

1  Press the 

Up

 or 

Down

 button until the 

Program

 option flashes. 

Press the 

OK

 button.

2   Press the 

Up

 or 

Down

 button until the day(s) that you wish to 

program flash in the lower part of the display, e.g. 

Mon Tue 

Wed Thu Fri

. Press 

OK

.

3  The symbol for the first event 

 will now flash.

The hour will flash, allowing you to set the hour at which you 

want the morning period to begin. Press the 

Up

 or 

Down

 button 

until the required hour is displayed.

4  Press the 

OK

 button. The minutes will flash.

Press the 

Up

 or 

Down

 button until the required minutes are 

displayed, press 

OK

.

5    The temperature setting will now flash in the upper part of the 

display. Press the 

Up

 or 

Down

 button to set the required tem-

perature. Press the 

OK

 button.

6    The symbol for the next event (e.g. at work) will now flash, allow-

ing you to set the time and temperature for this period of the day 

by repeating steps 3-5.

7    Once the four events have been set for all days, the display will 

return to the Program menu. Finally, select 

Exit

 to exit the 

Pro-

gram

 for a 5:2 schedule.

Ground Fault Circuit Interrupter (GFCI)

The thermostat has a built-in GFCI that ensures personal safety in case 

of ground faults.

It is important that the GFCI is checked monthly. See full manual on 

WWW.OJ-MICROLINE.COM/INTUITE.

Settings

The Settings option allows the following to be set:

Time: 

Set the hour and minutes.

Day: 

Set the actual day.

Child lock: 

Activate the child lock. To unlock, press OK to 

activate the menu, then hold the Up and Down 

buttons simultaneously for 3 seconds.

°C / °F: 

Choose between Celsius and Fahrenheit.

Application: 

Select the type of control used: 

Room/Floor/Regulator/Room limit*.

Offset temp: 

Adjust the measured temperature.

Readout:  

Readout of energy consumption in per cent, 

software version and application.

Adaptive:  

Ensures the required temperature is reached at 

the programmed time.

Display: 

Select what is shown on the default display.

Factory reset:   

Restore factory settings.

* Only UDG.

Exit Menu

The various menus and sub-menus contain an 

Exit

 option.

1   Press the 

Up

 or 

Down

 button until 

Exit

 flashes.

2   Press the 

OK

 button. You may have to repeat steps 1 and 2 to 

return to the final 

Exit

 option.

Should you enter a menu by mistake, you can exit it again without 

changing the setting by simply confirming the current setting, i.e. by 

clicking the 

OK

 button.

Factory Settings for Automatic 5:2 Program

Days 1-5 (Monday - Friday)

Event 

Time

Temperature

Morning

6:00 a.m. - 8:00 a.m.

77°F / 25°C

Out

8:00 a.m. - 4:00 p.m. 

68°F / 20°C

Home

4:00 p.m. - 10:00 p.m.

77°F / 25°C

Night

10:00 p.m. - 6:00 a.m.

68°F / 20°C

Days 6-7 (Saturday - Sunday)

Event 

Time

Temperature

Day

8:00 a.m. - 11:00 p.m.

77°F / 25°C

Night

11:00 p.m. - 08:00 a.m.

68°F / 20°C

English

 The trademark is registered and belongs to OJ Electronics A/S · © 2011 OJ Electronics A/S

Type UCG/UDG