Ojocam PRO 2 User Manual

Manual is about: Dash Cameras Ojocam

Summary of PRO 2

  • Page 2

    1 contents preface ............................................................................. 2 cautions before use ............................................................... 2 operational condition ............................................................. 2 product warranty and liabilit...

  • Page 3

    2 preface cautions before use because of “distracted driving legislation” in many countries, do not operate the product while you are operating the vehicle. Avoid exposing this product to dusty, dirty, or sandy areas to reduce the risk of damaging components. Do not expose the product to high temper...

  • Page 4

    3 1 product description the ojocam pro2 is equipped with a windshield mount and an optional built-in gps receiver for location tracking purposes. Images from the camera are stored on microsd card (optional) for future reference. The camera uses the leading video compression technology (h.264) for th...

  • Page 5

    4 1. Windshield mount w/ gps receiver (gps is optional); attach 3m sticker here and stick to windshield. If no gps receiver is included, it is as a bracket only. 2. Micro usb port (connect to car charger or usb) 3. Analog video out port 4. Up/menu/mute 5. Ok 6. Down/emergency 7. System indicator 8. ...

  • Page 6

    5 000:00:15 remaining recording time on the micro sd card. 1296p current recording resolution battery level indicator white balance mode: auto white balance mode: cloudy acquiring gps signal white balance mode: florescent gps signal locked white balance mode: sunny wide dynamic range mode on. This f...

  • Page 7

    6 2.3 setting date and time turn on the camera using the power button. Press menu (long press the up button) then press up and down buttons to choose date and time. Press ok button to confirm. 2.4 recycle setting/loop recording off, 1 minute, 3 minutes, 5 minutes 1. Off mode a. The camera cannot sta...

  • Page 8

    7 6. Ldws calibration: red line is the skyline, yellow line is hood line 7. Flicker: 50/60hz (for united states and canada, please choose 60hz) 8. White balance: auto (recommended), sunny, cloudy, fluorescent, incandescent (white balance is for correction under different lighting conditions. When wh...

  • Page 9

    8 3.4 gps: on/off gps tracking (only available with optional gps module installed) 1. Plug the gps module into the device. Satellite searching will begin automatically. 2. When a gps signal is located, will be showed on the display. 3. When taking picture in camera mode, the location will be automat...

  • Page 10

    9 4.3 file protection 4.3.1 when reviewing the video: 1. Long press the down button and select movie reviewing to display the latest video files on the lcd screen 2. Long press the up button to select the protect file option, then setup protection for one file or all, etc. - files marked with are pr...

  • Page 11

    10 1. Open video file: browse to the microsd card and browse to the video file 2. Delete a file from the playlist 3. Jump to the previous file on the playlist 4. Play video 5. Jump to the next file on the playlist 6. Stop video playback 7. Take a snapshot of the video 8. Volume control (when audio r...

  • Page 12

    11 appendix specifications image sensor ar0330 cmos chip ambarella ,a7la50d 1296p@30fps lens 130 wide angle storage media up to 32gb microsd card (class 6) iso auto display 1.5″ tft still images format: jpeg (image resolution:3mp) quality: auto videos compression format: h.264 (mov) resolution: 2304...

  • Page 13

    12 troubleshooting question possible reasons solutions the device suddenly turned off auto off function is on; low battery turn on the recorder and check settings; charge the battery the memory card is full, delete the files or format card (backup important files to a backup device). Captured images...

  • Page 14

    13 glossary of terms codec - in communications engineering, a codec is usually a coder/decoder. Codecs are used in integrated circuits or chips that convert e.G. Analog video and audio signals into a digital format for transmission. The codec also converts received digital signals back into analog f...

  • Page 15

    14 about the user’s manual we have tried our best to make sure that what in this user’s manual is correct and up to date, however, we cannot guarantee that all content without error. If there is a difference between the manual and device, please take the device as standard. We reserve the right to c...

  • Page 16

    15.