1. DL manuals
  2. Oki
  3. Printer Accessories
  4. 43347501
  5. User Manual

Oki 43347501 User Manual

Other manuals for 43347501: Configuration Manual, User Manual, User Manual
Manual is about: Oki Printer Accessories User Manual

Summary of 43347501

  • Page 2

    Okilan 8300e network user’s guide copyright information - 2 copyright information copyright © 2006 by oki data americas, inc. All rights reserved document information okilan 8300e network user’s guide p/n 59385001, revision 1.1 january, 2006 disclaimer every effort has been made to ensure that the i...

  • Page 3: Table of Contents

    Okilan 8300e network user’s guide table of contents - 3 table of contents copyright information . . . . . . . . . . . . . . . . . . . . . . .2 document information. . . . . . . . . . . . . . . . . . . . . . . . . . . 2 disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 4

    Okilan 8300e network user’s guide table of contents - 4 microsoft windows. . . . . . . . . . . . . . . . . . . . . . . . .64 overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 installation of tcp/ip protocol . . . . . . . . . . . . . . . . . . . . .65 windows 95/98/me...

  • Page 5: Configuration

    Okilan 8300e network user’s guide configuration - 5 configuration introduction the okilan internal print server is a fast 100base-tx/10base-t network interface. This network print server supports ieee802.2, ieee802.3, ethernet-ii and snap and can detect those frame types automatically. Also, it supp...

  • Page 6

    Okilan 8300e network user’s guide configuration - 6 specifications self-diagnostic test with the printer power switched on, press the print server test button for more than three seconds and release. The self-diagnostic test results and configuration settings are printed. Printed self-diagnostic tes...

  • Page 7

    Okilan 8300e network user’s guide configuration - 7 printed configuration settings sample networkinfo_pg1.Jpg.

  • Page 8

    Okilan 8300e network user’s guide configuration - 8 networkinfo_pg2.Jpg.

  • Page 9

    Okilan 8300e network user’s guide configuration - 9 configuration utility available utilities you can configure the print server by using one of the following methods: utility features system requirements quick setup configure the print server easily and simply without installing any software packag...

  • Page 10

    Okilan 8300e network user’s guide configuration - 10 setup assistant configure multiple printers into groups. Filter out printers. Search and manage ip addresses. Includes firmware upgrade tool. Create mib template. Windows 95 (osr2 and above), windows 98, me. Windows nt4.0, 2k and xp can be used on...

  • Page 11

    Okilan 8300e network user’s guide configuration - 11 using quick setup quick setup utility allows you to configure the print server easily and simply without installing any software packages. You can configure the following: > enable/disable tcp/ip, ethertalk, netbeui protocols. > set ip address, su...

  • Page 12

    Okilan 8300e network user’s guide configuration - 12 4. Select the language. Admgr_qsetbut.Gif sel_lang.Gif 5. Select quick setup. Sel_quicksetup.Gif 6. Follow the on-screen instructions. 7. If the settings are correct, click [execute]. The new settings are transmitted to the network card but the ne...

  • Page 13

    Okilan 8300e network user’s guide configuration - 13 using a web browser if the print server is connected to the network using tcp/ip, its settings and the printer menu settings can be configured using a web browser, such as microsoft internet explorer version 4.0 and higher, or netscape navigator v...

  • Page 14

    Okilan 8300e network user’s guide configuration - 14 3. To ensure correct operation, follow the procedure below for the appropriate network browser. Microsoft internet explorer a. Select [internet options] in the [tools] menu. B. Click on the [general] tab and click [settings] in [temporary internet...

  • Page 15

    Okilan 8300e network user’s guide configuration - 15 6. After the new values are transmitted to the network card, the following screen is displayed. If a different message is displayed, check the settings. Enterpassword.Bmp for example: for ethernet address 00:80:92:01:00:d2, a default password is [...

  • Page 16

    Okilan 8300e network user’s guide configuration - 16 standard setup using adminmanager adminmanager is a powerful microsoft windows-based utility to configure all print server functions by using a graphical user interface. Configuration requires a pc with windows 95/98/me, windows 2000 advanced serv...

  • Page 17

    Okilan 8300e network user’s guide configuration - 17 installation the following explanation uses windows 98 as an example. 1. Insert the cd-rom provided with your printer into the cd-rom drive. If the menu installer does not start automatically, click start → run → browse. Browse to your cd-rom and ...

  • Page 18

    Okilan 8300e network user’s guide configuration - 18 6. Follow the on-screen instructions. If you want to install adminmanager on your local drive, select [install and execute]. Otherwise, select [execute from cd-rom]. Adminmgr_execute.Bmp.

  • Page 19

    Okilan 8300e network user’s guide configuration - 19 interface select [start] → [programs] → [oki setup utility] → [admin manager]. File menu in the [file] menu, the following item can be selected: item function search search printers in your network and list all printers that have the okilan instal...

  • Page 20

    Okilan 8300e network user’s guide configuration - 20 status menu in the [status] menu, the following items can be selected: item function printer status current printer status is displayed: bmp10.Bmp system status displays current okilan configuration. Configuration data can be saved as log file. Bm...

  • Page 21

    Okilan 8300e network user’s guide configuration - 21 setup menu in this menu, the following items can be selected: item function oki device setup configure the okilan. Setup by http launch the default browser in your environment to access the selected printer’s web page. Setup by telnet launch telne...

  • Page 22

    Okilan 8300e network user’s guide configuration - 22 oki device setup in this section you can configure the print server. It contains details for the following selectable tabs: > general > tcp/ip > netbeui > snmp > e-mail (send) > sntp > maintenance the following section explains each tab’s function...

  • Page 23

    Okilan 8300e network user’s guide configuration - 23 tcp/ip tab this allows you to configure tcp/ip related items. Bmp22.Bmp to find corresponding items in web and telnet, see the equivalent in the configurable items and default values table that starts on page 40. Netbeui tab this allows you to con...

  • Page 24

    Okilan 8300e network user’s guide configuration - 24 snmp tab this allows you to configure snmp related items. Bmp31.Bmp short printer name set a computer name for the okilan. Workgroup set a work group name to which the okilan belongs. Comment set the comments for the okilan. Location comments snmp...

  • Page 25

    Okilan 8300e network user’s guide configuration - 25 printer trap setup . . . By selecting the button, the following dialogue box is displayed: bmp32.Bmp in the dialogue box, the following items can be configured: printer trap community name this community name is assigned to outgoing printer status...

  • Page 26

    Okilan 8300e network user’s guide configuration - 26 printer trap setup . . . Detail . . . Cover open set sending a trap, enabled or disabled, when the printer cover opens. Printer error set sending a trap, enabled or disabled, when any errors occur. Trap enable set sending a trap packet, enabled or...

  • Page 27

    Okilan 8300e network user’s guide configuration - 27 printer trap setup . . . Detail . . . Cover open set sending a trap, enabled or disabled, when the printer cover opens. Printer error set sending a trap, enabled or disabled, when any errors occur. Location comments.

  • Page 28

    Okilan 8300e network user’s guide configuration - 28 e-mail (send) tab in e-mail tab, you can configure smtp related items. Location comments use smtp transmit protocol set sending e-mail via smtp, enabled or disabled. Smtp server name set server name. Priinter e-mail address set the e-mail address ...

  • Page 29

    Okilan 8300e network user’s guide configuration - 29 sntp tab in sntp tab, you can configure sntp related items. Location comments use sntp transmit protocol use sntp protocol. Ntp server 1 address set server 1 address. Ntp server 2 address set server 2 address. Adjust interval set interval that oki...

  • Page 30

    Okilan 8300e network user’s guide configuration - 30 maintenance tab in maintenance tab, you can configure the following: location comments lan scale set lan scale (normal/small) ip filter setup detail... By selecting the button, the following items can be configured: configuration admin ip address ...

  • Page 31

    Okilan 8300e network user’s guide configuration - 31 ip address setup if you only use tcp/ip and the okilan has not yet been configured, occasionally it may not be displayed on adminmanager. You can configure the ip address of the okilan by this function. 1. Select [ip address setup] from the [setup...

  • Page 32

    Okilan 8300e network user’s guide configuration - 32 option menu in the [option] menu, the following item can be selected: help menu in the [help] menu, [about] is available as well as revision information for adminmanager. Item function use tcp/ip protocol if this item is selected, adminmanager use...

  • Page 33

    Okilan 8300e network user’s guide configuration - 33 using telnet the okilan can be configured using telnet. Telnet requires the okilan to have a valid ip address configured. If the nic already has an ip address configured, skip steps one to three below. > note: please ensure that a valid ip address...

  • Page 34

    Okilan 8300e network user’s guide configuration - 34 interface card settings to default and try to set temporary ip address. If you still have the problem after resetting the network interface card, consult the network manager. 4. Login to the network card using telnet. Example: for ip address 172.1...

  • Page 35

    Okilan 8300e network user’s guide configuration - 35 please select (1-99)? 5. Enter the number of the items to be changed and the details screen for that item is displayed. The menu has the following hierarchical structure so for more details see the description in the appropriate numbers.

  • Page 36

    Okilan 8300e network user’s guide configuration - 36 telnet hierarchical structure level1 level2 level3 ref no. 1: setup tcp/ip 1: tcp/ip protocol — tcpip-1 2: ip address — tcpip-2 3: subnet — tcpip-3 4: gateway — tcpip-4 5: rarp protocol — tcpip-5 6: dhcp/bootp protocol — tcpip-6 7: dns server(pri....

  • Page 37

    Okilan 8300e network user’s guide configuration - 37 6: setup printer port 1: 2: ethertalk port name port 2 3: boj string — port-3 4: eoj string — port-4 5: boj string(kanji) — port-5 6: eoj string(kanji) — port-6 7: printer type — port-7 8: tab size (char.) — port-8 9: page width (char.) — port-9 1...

  • Page 38

    Okilan 8300e network user’s guide configuration - 38 8. When configuration is complete, select [exit setup] to save your change. To exit without saving your modification, select [quit]. 9: setup smtp (e-mail) 1: smtp transmit — smtp-1 2: smtp receive — smtp-2 3: smtp server name — smtp-3 4: smtp por...

  • Page 39

    Okilan 8300e network user’s guide configuration - 39 9. Turn the printer off and on again. The network card continues to use pre-transmission settings until the printer is turned off and back on again..

  • Page 40

    Okilan 8300e network user’s guide configuration - 40 using snmp the printer and network card can be managed via a standard snmp management station. The network card supports snmpv1 and mib-ii. The printer’s trap address can be set in five places using tcp/ip and in one place with ipx. Printer trap s...

  • Page 41

    Okilan 8300e network user’s guide configuration - 41 tcpip-6 [oki device setup]-[tcp /ip]-[use dhcp/ bootp] [network configuration]-[t cp/ip]-[method for assigning ip address]-[dhcp/ bootp] [setup tcp/ ip]-[dhcp/ bootp protocol] enable / disable set dhcp function, enabled/ disabled tcpip-7 [oki devi...

  • Page 42

    Okilan 8300e network user’s guide configuration - 42 snmp-2 [oki device setup]-[sn mp]-[trap community] [network configuration]-[ snmp traps]- [mib-ii information]- [trap community] [setup snmp]- [trap community] any alphanumeric characters up to 15 characters. (default is [ public ]) this community...

  • Page 43

    Okilan 8300e network user’s guide configuration - 43 ethertalk-1 [oki device setup]-[eth ertalk]-[use ethertalk protocol] [network configuration]-[ general settings]-[protoc ol options]-[ethert alk] [setup ethertalk]-[et hertalk protocol] enable / disable set ethertalk, enabled or disabled ethertalk...

  • Page 44

    Okilan 8300e network user’s guide configuration - 44 port-2 [oki device setup]-[eth ertalk]-[prin ter name] [network configuration]-[e thertalk]-[ethert alk printer name] [setup printer port]-[ethertal k port name] any alphanumeric characters up to 32 characters. (default is the printer name on whic...

  • Page 45

    Okilan 8300e network user’s guide configuration - 45 port-4 [setup printer port]-[eoj string] any alphanumeric and following control characters up to 31 characters. (default is null ) \b backspace (0x08) \t tab (0x09) linefeed (0x0a) \v vertical tab (0x0b) \f page feed (0x0c) \r carriage return (...

  • Page 46

    Okilan 8300e network user’s guide configuration - 46 port-6 [setup printer port]-[eoj string(kanji)] any alphanumeric and following control characters up to 31 characters. (default is null ) \b backspace (0x08) \t tab (0x09) linefeed (0x0a) \v vertical tab (0x0b) \f page feed (0x0c) \r carriage r...

  • Page 47

    Okilan 8300e network user’s guide configuration - 47 port-9 [setup printer port]-[page width (char.)] 0—255 ( 78 ) set page width when data is sent to sjis/euc logical printer/ directory. If the width of one line exceeds this value, carriage return and line feed are inserted automatical ly. The valu...

  • Page 48

    Okilan 8300e network user’s guide configuration - 48 trap-1 [oki device setup]-[sn mp]-[printer trap setup . . . ]-[printer trap community name] [network configuration]-[ snmp traps]- [trap destination]-[pri nter trap community name] [setup printer trap]-[prn-tra p community] any alphanumeric charac...

  • Page 49

    Okilan 8300e network user’s guide configuration - 49 trap-6 [oki device setup]-[sn mp]-[printer trap setup . . .]-[tcp#1— 5]-[detail . . .]-[paper jam] [network configuration]-[ snmp traps]- [trap assignments]-[p aper jam] [setup printer trap]-[setup tcp#1—5 trap] – [paper jam trap] enable/ disable ...

  • Page 50

    Okilan 8300e network user’s guide configuration - 50 trap-12 [oki device setup]-[sn mp]-[printer trap setup . . .]-[ipx]- [detail . . .]-[off-line] [network configuration]-[ snmp traps]-[trap assignments]- [off-line] [setup printer trap]-[ setup ipx trap] – [off-line trap] enable/ disable set sendin...

  • Page 51

    Okilan 8300e network user’s guide configuration - 51 smtp-1 [oki device setup]-[sm tp]- [use smtp transmit protocol] [network configuration]-[e mail settings]-[email transmit settings]- [smtp transmit] [setup smtp (e-mail)]- [smtp transmit] enable/ disable set sending e-mail via smtp, enabled or dis...

  • Page 52

    Okilan 8300e network user’s guide configuration - 52 smtp-8 [oki device setup]-[sm tp]-[1— 5]-[check interval] [network configuration]-[e mail settings]-[email alert assignments]- [re-send interval] [setup smtp( e-mail)]-[even t to address 1—5] – [re-send interval] disable / 30min/60min/ 24hour set ...

  • Page 53

    Okilan 8300e network user’s guide configuration - 53 smtp-15 [oki device setup]-[sm tp]-[1—5]- [selected condition] [network configuration]-[e mail settings]-[email alert assignments]-[s tacker error] [setup smtp (e-mail)]-[eve nt to address 1—5] – [stacker error] enable/ disable an e-mail is sent w...

  • Page 54

    Okilan 8300e network user’s guide configuration - 54 pop-2 [oki device setup]-[pop ]-[pop3 server address/ name] [network configuration]-[e mail settings]-[email receive settings]- [pop server name] [setup pop (e-mail)]-[pop 3 server] any alphanumeric characters up to 63 characters. (default is null...

  • Page 55

    Okilan 8300e network user’s guide configuration - 55 configurable items vary between printers. Etc-2 [network configuration]-[ general settings]-[syste m information]- [printer serial number] read only item. Printer serial number is displayed etc-3 [network configuration]-[ general settings]-[syste ...

  • Page 56

    Okilan 8300e network user’s guide configuration - 56 management utility printsupervision printsupervision is a web-based application for managing printing devices connected to a network. It consists of two parts: a web application based on microsoft web server (internet information server, iis or pe...

  • Page 57

    Okilan 8300e network user’s guide configuration - 57 system requirements windows the main printsupervision application can be installed in any of the following windows systems. While the printsupervision application may work in windows 95 with pws installed, printsupervision may not install or work ...

  • Page 58

    Okilan 8300e network user’s guide configuration - 58 supported browsers the browsers supported are: internet explorer (ie) 4.01 and above. Netscape navigator 4.0 and above. Opera 5.12 and above. The printsupervision application can be accessed from any windows, macintosh, unix, or linux desktop that...

  • Page 59

    Okilan 8300e network user’s guide configuration - 59 installation to install the printsupervision utility note: you must be connected to the internet to download this utility. Windowsxp/2000/nt4.0 requires administrator privileges. 1. Insert the cd-rom provided with your printer into the cd-rom driv...

  • Page 60

    Okilan 8300e network user’s guide configuration - 60 > select [start] → [programs] → [printsupervision] → [uninstall printsupervision], or > from [control panel], select [add/remove programs], select [printsupervision] from the index window and click [add/ remove]. When the uninstallation is complet...

  • Page 61

    Okilan 8300e network user’s guide configuration - 61 printing utility oki lpr the oki lpr utility is a utility that allows printing data to printers connected to the network via tcp/ip. This utility is for use with windows xp, windows 2000, windows me, windows 98, windows 95 and window nt4.0. The ut...

  • Page 62

    Okilan 8300e network user’s guide configuration - 62 7. Check [register in startup] if you want automatic startup as windows boots up. Check [launch as minimized] if you want to startup in the icon state and click [next]. 8. Verify the program folder name and click [next]. The installation starts. 9...

  • Page 63

    Okilan 8300e network user’s guide configuration - 63 uninstallation 1. Stop the oki lpr utility. Right-click the oki lpr icon in the system tray and click [exit]. 2. Select [start] → [program] → [okidata] → [oki lpr utility] → [uninstall oki lpr utility] ([start] → [all programs] → [okidata] → [oki ...

  • Page 64: Microsoft Windows

    Okilan 8300e network user’s guide microsoft windows - 64 microsoft windows overview this chapter provides guidelines on how to print over the network from various microsoft windows platforms. There are numerous ways of printing from windows and the exact set-up will vary depending upon your environm...

  • Page 65

    Okilan 8300e network user’s guide microsoft windows - 65 installation of tcp/ip protocol there are a number of options available when printing using tcp/ ip for windows. The following table lists the options: 1 these functions are built into windows and are displayed as options when using the add pr...

  • Page 66

    Okilan 8300e network user’s guide microsoft windows - 66 windows 95/98/me 1. Click the [start] button, select [settings] and then click [control panel]. 2. In the [control panel] double-click on the [network] icon. 3. In the [network] dialogue box click [configuration panel]. 4. If the [client for m...

  • Page 67

    Okilan 8300e network user’s guide microsoft windows - 67 windows 2000 1. Click the [start] button, select [settings] and then click [network and dial-up connections]. 2. Double-click the [local area connection] icon. In the [local area connection status] dialogue box, click [properties]. 3. In the [...

  • Page 68

    Okilan 8300e network user’s guide microsoft windows - 68 7. The windows xp installation cd-rom may be required. Follow the remaining dialogue box prompts. Once the protocol has been installed and configured in windows, the next step is to configure the tcp/ip parameters in the network printer..

  • Page 69

    Okilan 8300e network user’s guide microsoft windows - 69 network printer ip address configuration use the admin/manager standard set-up utility to configure the ip address. 1. Connect the printer to the network and turn on. 2. Place the cd provided with your printer in the cd-rom drive. The set-up u...

  • Page 70

    Okilan 8300e network user’s guide microsoft windows - 70 windows 95/98/me when printing using tcp/ip, the oki lpr utility is the only option to use. The following procedure should be used. When installing the driver, ensure it is installed as a local printer and not a network printer. Ensure the app...

  • Page 71

    Okilan 8300e network user’s guide microsoft windows - 71 3. Select [my computer] and then [next]. 4. Select [add port]. 5. Select [lpr port] and then [ok]. 6. In [name or address of server providing lpd] type the host name or ip address of the host for the printer you are adding. 7. In [name of prin...

  • Page 72

    Okilan 8300e network user’s guide microsoft windows - 72 windows 2000 windows 2000 requires administrator privileges. With windows 2000, there are four options for printing using tcp/ ip. > oki lpr > microsoft lpr > port 9100 > ipp in order to use microsoft lpr, it must first be installed on your sy...

  • Page 73

    Okilan 8300e network user’s guide microsoft windows - 73 in [name or address of server providing lpd] enter the host name or internet protocol (ip) address of the host for the printer you are adding. In [name of printer or print queue on that server] type lp. Follow the instructions on the screen to...

  • Page 74

    Okilan 8300e network user’s guide microsoft windows - 74 13. Select [ok]. 14. Select [follow the instructions on the screen to finish installing the printer.] ipp 1. Select [start] → [settings] → [control panel and printers]. 2. Open the [printers folder]. 3. Double-click [add printer] and then sele...

  • Page 75

    Okilan 8300e network user’s guide microsoft windows - 75 oki lpr please follow the procedure described in the windows 95/98/me section on page 70. Microsoft lpr to install this port, the following needs to be carried out: 1. Select [start] → [settings] → [control panel] → [printers and other hardwar...

  • Page 76

    Okilan 8300e network user’s guide microsoft windows - 76 13. Click [ok]. 14. Follow on screen instructions to finish installing the printer. Port 9100 1. Select [start] → [settings] → [control panel] → [printers and other hardware]. 2. Select [printers and faxes]. 3. Click [add printer] and then cli...

  • Page 77

    Okilan 8300e network user’s guide microsoft windows - 77 14. Follow the instructions on the screen to finish installing the printer. Ipp 1. Select [start], [settings], [control panel]. And [printers and other hardware]. 2. Select [printers and faxes]. 3. Click [add printer] and then select [next]. 4...

  • Page 78

    Okilan 8300e network user’s guide microsoft windows - 78 netbeui protocol netbeui is a protocol that was designed for use on small workgroups or lans. Within windows, netbeui is used for file and printer sharing between computers. It provides a simple method of printing, but the protocol does have l...

  • Page 79

    Okilan 8300e network user’s guide microsoft windows - 79 3. In the network dialogue box select [configuration panel]. 4. If [client for microsoft networks] is not listed, click [add]. 5. In the [select network component type] dialogue box, select [protocol] then [add]. 6. In the [select network prot...

  • Page 80

    Okilan 8300e network user’s guide microsoft windows - 80 4. In the [select network component type] dialogue box, select [protocol] and click [add]. 5. In the [select network protocol] dialogue box, select [netbeui protocol] and click [ok]. 6. Click [close] in the [local area connection properties] d...

  • Page 81

    Okilan 8300e network user’s guide microsoft windows - 81 printer driver configuration in the following example, the printer has been configured as follows: 1. Set up the printer driver as the default local printer. 2. In the [start] menu, select [settings] then [printers]. 3. Select the relevant pri...

  • Page 82

    Okilan 8300e network user’s guide microsoft windows - 82 > the master browser function can only manage this network card. If the printserver name is put into another workgroup, the network card will not be able to find it on the network. > a maximum of eight ethernets can be managed by the master br...

  • Page 83: Unix

    Okilan 8300e network user’s guide unix - 83 unix overview the okilan print server supports many protocols such as lpd, ftp, telnet, snmp and ipp, and works within the unix environment. To use the network card within the unix environment, the following steps are required: configuration network interf...

  • Page 84

    Okilan 8300e network user’s guide unix - 84 example: for ip address 172.68.20.127 and network card address 00:80:92:01:00:d2 # arp –s 172.168.20.127 00:80:92:01:00:d2 temp the ethernet address (mac address) 00:80:92:01:00:d2 in the above example can be determined from the network card self-diagnosti...

  • Page 85

    Okilan 8300e network user’s guide unix - 85 login: root ‘root’ user needs password to login. Password: user ‘root’ logged in. No. Message value (level .1) 1 : setup tcp/ ip 2 : setup snmp 4 : setup ethertalk 5 : setup netbeui 6 : setup printer port 7 : display status 8 : setup printer trap 9 : setup...

  • Page 86

    Okilan 8300e network user’s guide unix - 86 1 : tcp/ ip protocol : enable 2 : ip address : 172.168.20.127 3 : subnet mask : 255.255.255.0 4 : gateway address : 172.168.20.1 5 : rarp protocol : disable 6 : dhcp/ bootp protocol: disable 7 : root password : “ “ 99 : back to prior menu please select (1-...

  • Page 87

    Okilan 8300e network user’s guide unix - 87 2. Register the ip address of the network card and the host name in the /etc/hosts file. Example: for ip address 172.168.20.127 and host name printer 172.168.20.127 printer 3. Use the ping command to confirm connection with the network card. Example: for h...

  • Page 88

    Okilan 8300e network user’s guide unix - 88 rm: the name of the host of the remote printer. This should be the same as the name added to the /etc/hosts file. Rp: the name of the printer on the remote printer. It should be lp. Sd: the spool directory. Give the absolute path. Lf: the error log file. G...

  • Page 89

    Okilan 8300e network user’s guide unix - 89 other errors result in waiting time, printing may have to be aborted. If an incorrect ip address is entered, the network may go down or other damage may occur. Configure after consulting the network manager. The following explanation uses sun solaris 2.8 (...

  • Page 90

    Okilan 8300e network user’s guide unix - 90 5. Register the network card as a remote printer server. Example: for host name printer a. Stop the print scheduler. # usr/sbin/lpshut b. Create the printer queue. # /usr/sbin/lpadmin -p printer_lp -v /dev/null \ m netstandard -o dest=printer:lp -o protoco...

  • Page 91

    Okilan 8300e network user’s guide unix - 91 hp-ux 10.X configuration if an incorrect ip address, subnet mask or gateway is entered, the network may go down or other damage may occur. Check the address with the network manager. The following example uses hp-ux10.20 and an oki printer as examples. The...

  • Page 92

    Okilan 8300e network user’s guide unix - 92 5. If remote spooling is not already enabled on the hp-ux machine, carry out the following configuration. A. Stop the printer spooler. # /usr/sbin/lpshut b. Add the following line to the /etc/inetd.Conf file and register the remote spooler. Printer stream ...

  • Page 93

    Okilan 8300e network user’s guide unix - 93 to customise output, for example, to add additional commands at the start of each print job, you can edit a copy of the /usr/spool/ lp/model/rmodel model file then add it using the lpadmin command. Example: for printer printer_lp, with model file called pr...

  • Page 94

    Okilan 8300e network user’s guide unix - 94 if there is no reply, there is a problem with the configuration of the ip address (the ip address has been already set manually or by the dhcp/rarp server), or with the network. Reset the network interface card settings to default and try to set a temporar...

  • Page 95

    Okilan 8300e network user’s guide unix - 95 queue to be added “printer_lp” host name of the remote server “printer” queue name of the remote server “lp” type of print spooler of the remote server “bsd” description of printer name of the remote server “optional comment” lpd printing line printer daem...

  • Page 96

    Okilan 8300e network user’s guide unix - 96 > sjis and euc function only as postscript printers. Bsd-based unix print using the lpr command. # lpr –pcprinter_lp test.Prn if the lprm command is used, the print job is cancelled. Example: to delete a print job (job id 123) on the okiprinter_lp # lprm –...

  • Page 97

    Okilan 8300e network user’s guide unix - 97 # cancel cprinter_lp -456 verify the printer status using the lpstat command. # lpstat –pcprinter_lp > the result of lpstat may not be displayed correctly depending on unix operating system specification (e.G. Solaris 2.X). Ftp printing ftp (file transfer ...

  • Page 98

    Okilan 8300e network user’s guide unix - 98 1. Login to the network interface card. When printing with ftp , use any values for name and password. However, if the user name is [root], the password set under telnet or the utility are required. See the appropriate section for details. Example: logging...

  • Page 99

    Okilan 8300e network user’s guide unix - 99 257 ”/lp” is current directory ftp> 3. Configure the transfer mode there are two types of transfer mode: binary mode, in which the file contents are output as it is and ascii mode, which converts the lf code to the cr+lf code. If a binary file converted by...

  • Page 100

    Okilan 8300e network user’s guide unix - 100 three states can be verified using the quote command stat : the ip address, login user name and transfer mode. In addition, printer status can be verified by specifying the directory after the stat (lp, sjis, euc). Example: displaying network card status ...

  • Page 101: Apple

    Okilan 8300e network user’s guide apple® macintosh® - 101 apple ® macintosh ® overview the okilan print server supports the apple macintosh appletalk environment. This guide is for administrators and it should be read in conjunction with the relevant macintosh manual. The latest macintosh service pa...

  • Page 102

    Okilan 8300e network user’s guide apple® macintosh® - 102 installation install the driver 1. Place the cd, supplied with your printer, in the cd-rom drive. 2. Double-click the cd icon that appears on the desktop. 3. Double-click the mac folder (os9 or osx), click continue. 4. Double-click the printe...

  • Page 103: Troubleshooting

    Okilan 8300e network user’s guide troubleshooting - 103 troubleshooting the network addresses used in this manual are shown for example only. Network addresses used in your installation must be generated from your own network. Self-diagnostic test printer does not print. Ensure the printer emulation...

  • Page 104

    Okilan 8300e network user’s guide troubleshooting - 104 change the cable and try again. Run the self-diagnostic test. Check the ip address, subnet mask and gateway are correct. Check that the tcp/ip protocol is set to enable. Reset the network interface card to factory default settings. If dhcp, boo...

  • Page 105

    Okilan 8300e network user’s guide troubleshooting - 105 ethertalk not identified by the chooser and the setup utility. Turn the printer off and on again. Check the network cable is correctly connected. Change the cable and try again. If the network resides in a zone, check the correct zone name is s...

  • Page 106

    Okilan 8300e network user’s guide troubleshooting - 106 check the netbeui protocol is set to enable. Check the factory setting of the workgroup name is printserver and the computer name is ml+ the last six digits of the mac address. Check the computer name of the nic is different from the computer n...

  • Page 107

    59385001 oki data americas, inc. 2000 bishops gate blvd., mt. Laurel, nj 08054-4620 tel: (856)235-2600 fax: (856)222-5320