Oki B2500 MFP Safety & Warranty

1: English

B2500 Series MFP

Safety, Warranty and Regulatory Information . . . . . . . . . . . . . 1

Informations de sécurité, de garantie, et de réglementation . . 9

Información sobre seguridad, garantía, y regulaciones . . . . . 18

Informações sobre segurança, garantia, e normativas. . . . . . 29 

Safety Information, 

120-Volt Models

For all countries / regions.

Your OKI product has been carefully designed to give you years 

of safe, reliable performance. As with all electrical equipment, 

there are a few basic precautions you should take to avoid 

hurting yourself or damaging the product.

• Carefully read the provided setup and operating instructions.

• Save all provided documentation for future reference.

• Read and follow all warning and instruction labels on the 

product itself.

• Unplug the product before you clean it. Use only a damp 

cloth; do not use liquid or aerosol cleaners.

• Place your product on a firm, solid surface. If you put it on 

something unsteady, it may fall and be damaged. If you place 

it on a soft surface, such as a rug, sofa, or cushion, the vents 

may be blocked, causing the product to overheat.

• Protect your product from overheating. Make sure no 

obstructions block the openings of the product. Do not put 

the product on or near a heat source (such as a radiator or 

heat register). Keep the product out of direct sunlight.

• Always use this product in a well ventilated area. Allow 

enough room around the product for adequate ventilation 

and easy access to the paper trays. If you put the product in 

any kind of enclosure, make sure the enclosure is well 

ventilated.

• Do not use your product near water. Do not spill liquid of any 

kind into it. 

• Be certain that your power source matches the rating listed 

on the back of the product. If you are not sure, check with 

your dealer or with your local power company.

• Do not connect this product to an uninterruptible power 

supply (UPS). For further information please contact Oki Data 

at 1-800-OKI-DATA.

• Your product has a grounded, three-prong plug as a safety 

feature. This plug only fits into a grounded outlet. If the plug 

does not fit, the outlet may be an older, non-grounded type. 

Contact an electrician to have the outlet replaced. Do not use 

an adapter to defeat the grounding.

• Install the product near an easily accessed power outlet.

• Avoid damaging the power cord. Do not put anything on it or 

place it where it will be walked on. If the cord becomes 

damaged or frayed, replace it immediately.

• If you are using an extension cord or power strip with the 

product, make sure that the total of the amperes required by 

all the equipment on the extension is less than the 

extension’s rating. The total ratings of all equipment plugged 

into the outlet should not exceed 15 amperes.

• Do not poke anything into the ventilation slots of the product. 

You could get an electrical shock or cause hazardous 

electrical arcing, which could cause a fire.

• Aside from the routine maintenance described in the 

documentation, do not try to service the product yourself. 

Removing the cover may expose you to shocks or other 

hazards. 

• Do not make any adjustments other than those outlined in 

the documentation. You may cause damage that will require 

extensive repair work. The provided documentation explains 

how to get your product serviced by qualified Oki Data 

technicians.

If anything happens that indicates that your product is not 

working properly or has been damaged, unplug it immediately 

and follow the procedures in the provided documentation for 

having your product serviced. 

Here are some of the things to look for.

• The power cord or plug is frayed or damaged.

• Liquid has been spilled into the product, or the product has 

been exposed to water.

• The product has been dropped, or the cabinet is damaged.

• The product does not function normally when you are 

following the operating instructions.

Additional Safety Informaton for 

Telecommunications Equipment

When using your telephone equipment, basic safety 

precautions should always be followed to reduce the risk of fire, 

electric shock and injury to persons, including the following:

• Do not use this product near water—for example, near a 

bathtub, washbowl, kitchen sink or laundry tub—in a wet 

basement, or near a swimming pool.

• Avoid using a telephone (other than a cordless type) during 

an electrical storm. There may be a remote risk of electric 

shock from lightning.

• Do not use the telephone to report a gas leak in the vicinity 

of the leak.

• Use only the power cord and batteries indicated in this 

manual. Do not dispose of batteries in a fire. They may 

explode. Check with local codes for possible special disposal 

instructions.

SAVE THESE INSTRUCTIONS.

Summary: English Section

Safety Information  . . . . . . . . . . . . . . . . . . . . . .  1-2

Warranty Information . . . . . . . . . . . . . . . . . . . . . . 3

Service and Support  . . . . . . . . . . . . . . . . . . . . . . . 4

Regulatory Information. . . . . . . . . . . . . . . . . . . . . 5

Material Safety Data Sheet (MSDS). . . . . . . . . . . . 7