Oki B710 User Manual - page 22
Printing > 22
7.
From the
Source
drop down select the loaded paper tray.
8.
Click the
Paper Size
drop down and select the size of the original document.
9.
Click
OK
.
10.
Click
in the Print dialog box to start printing.
P
RINTING
ON
C
USTOM
S
IZE
P
APER
/L
ONG
P
APER
This section explains how to print on custom size paper such as long paper.
The paper sizes that can be set on this printer are as follows:
a. Paper that extends beyond 356 mm (14 in.), the print quality on that part of the paper cannot be
guaranteed.
L
OADING
C
USTOM
S
IZE
P
APER
The way to load custom size paper with the long edge shorter than 356 mm in trays 1 to 4
is the same as loading standard size paper. For details, refer to
To load long paper in Tray1, follow the procedure below:
1.
Pull the paper tray out to its maximum.
NOTE
>
The custom paper size has to be set on the control panel and the printer
driver, refer to
“Setting Custom Paper Sizes” on page 23
>
You must set Auto-sense to Off before setting the paper type.
>
To load long-size paper with the long edge exceeding 356mm, load the
paper with the edge protruding from the tray.
TRAY
LONG EDGE
SHORT EDGE
Tray 1
215.9 - 1219.2mm (8.5 - 48in)
a
76.2 - 127mm (3 - 5in)
Tray 2, 3 and 4
215.9 - 355.6mm (8.5 - 14in)
a
98.4 - 148mm (3.875 - 5.83in)
NOTE
Pull the extendable part out to its maximum. For details on the procedure to
extend the paper tray, refer to
.