Oki ES845MFP User Manual - page 162
Troubleshooting > 162
I
NFORMATION
AND
ERROR
MESSAGES
NOTE
1. = Y, M, C or K.
2. = Tray 1, Tray 2, Tray 3 or MP Tray.
3. mmm = the setup of “paper supply”.
4. ppp = the setup of “media type”.
STATUS /
CODE
MESSAGE
MEANING / ACTION
Initializing
Check Data
Program Data Receive Error
An error occurs while the machine is
receiving/processing the NIC download data.
%DLCODE%
1. File size error
2. Check SUM error
3. Invalid printer model number
4. Invalid module I/F version
5. Invalid FAT version
Restart the machine. (Turn it off and on
again).
If the code still appears, contact your dealer.
Initializing
Check Data
Program Data Write Error
An error occurs when writing NIC download
data.
%DLCODE%
1. Memory allocation error
2. Download file error
3. Device allocation error
4. No device space
5. File writing failure
6. CU-F/W mismatch.
Restart the machine. (Turn it off and on
again).
If the code still appears, contact your dealer.
Initializing
Inspection is required.
PU Flash Error
Restart the machine. (Turn it off and on
again).
If the code still appears, contact your dealer.
Initializing
Inspection is required.
PU Communication Error
Restart the machine. (Turn it off and on
again).
If the code still appears, contact your dealer.
Initializing
HDD Error
To HDD format Select [Format]
To shut down Select [Cancel]
An unformated HDD is detected during the
initializing.
Press the Format button to format the HDD;
the unit is automatically rebooted.
Press the Cancel button to shut down the
unit.
Initializing
HDD Error
To HDD format Select [Format]
To shut down Select [Cancel]
Encrypted authentication files on the HDD
are damaged and the HDD must be re-
formatted.
Press the Format button to format the HDD;
the unit is automatically rebooted.
Press the Cancel button to shut down the
unit.
%ERRCODE% 250