Oki ES845MFP User Manual - page 43

Configuring your machine... > 43

Fax Setup 

(cont.)

Other 

Settings 

(cont.)

Block Junk Fax

Setting:

OFF, Mode1, Mode2, 

Mode3

Can prevent unnecessary fax 

reception.

Mode1: Reject fax from a number 

not registered in the Address 

Book.

Mode2: Reject fax from a number 

registered in the Reject List.

Mode3: Reject fax from a number 

not registered in the Address Book 

or registered in the Reject List.

Register/Edit

Select a listing and register or edit 

a number in the Reject list.

Note: enter the last four digits of 

the fax number.

Note: only available if Mode2 or 

Mode3 Setting selected.

Note: max. 50 entries.

Delete

Select a number from the listing 

and delete.

Ring Response

00~02~10 Times

Enter the number of rings required 

before receiving an incoming fax.

Dialing Pause 

Duration

00~02~10 Second

Enter the pause duration required.

High Resolution

400dpi, 600pdi

Select the resolution.

Rx Reduc. Rate

Auto, 100%

Select the Rx reduction rate.

Reduc. Margin

00~24~85 mm

Select the reduction margin.

Rotate Tx

OFF, ON

Enable/disable fax image rotation.

Condition: only available when A4 

LEF or Letter LEF selected.

ECM Mode

OFF, ON

Error correction mode (ECM) 

automatically detects and corrects 

errors in the fax transmission 

process that are sometimes 

caused by telephone line noise.

PreFix

User defined

Enter the require dialing prefix (if 

you are connected via a PBX then 

you need to enter a prefix to 

obtain an outside line connection).

Note: max. 40 digits.

Received Time 

Stamp

OFF, ON

Set to ON if you want the time 

stamp printed on incoming faxes.

Print Check 

message

OFF, ON

If enabled, when a transmission 

error occurs the error content is 

reported.

FEATURE

OPTION

DESCRIPTION