Oki LP470b Installation Instructions

English

For operating the printer via an AC outlet. Can also 

be used to charge a battery pack loaded inside the 

printer.

WARNING Use only the specified AC Adapter 

designed for your printer.

Cautions

Power

Do not use wet hands to unplug the AC 

adapter

.

Doing so increases the risk of 

electric shock.

Storing the Printer

If you have no plan to use the printer for 

a long time,

unplug the AC adapter from 

the wall outlet.

Maintenance and Cleaning

For safe maintenance or cleaning of the 

printer, make sure to remove the AC 

adapter from the printer

.

Installation

1. Remove the cover of the printer’s DC input 

jack (1) and connect the AC adapter’s DC 

output terminal (2) to it. 

2. Connect the AC adapter to the wall outlet (3) 

and turn on the power. 

The POWER lamp turns green.

Important! Be sure to turn the printer power off 

when removing the DC output terminal 

of the AC adapter or disconnecting the 

power source. Otherwise, the 

information stored in the printer may 

not be updated. 

Note: A battery pack is unnecessary when an AC 

adapter is used. If a battery pack and an AC 

adapter are being used at the same time, the 

printer will attempt to charge the battery 

pack (if it is not already fully charged).

Charging Time

With the AC adapter, it takes about 5 hours for the 

battery pack to reach full charge from a fully 

discharged state.

Installation Instructions

AC Adapter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 

L'adaptateur c.a. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 

Adaptador de CA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Adaptador de CA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4