Oki M84Pro Quick Manual - page 5
M-84PRO
Quick
Guide
Pg
21
PRINT-OUTS
Vector Fonts
Proportional or Fixed Spacing
Font Size 50 x 50 dots to 999 x 999 dots
Helvetica, 10 Font Variations
Rotation
0º , 90º , 180º , and 270º Rotation
Graphics
Dot addressable, SATO Hex/Binary, BMP or PCX formats
SPECIFICATION M-84PRO
All
Models
CONTROLS AND INDICATORS
Power Green
LED
On-Line Green
LED
Label Red
LED
Ribbon Red
LED
Error Red
LED
LCD Panel
2 Line x 16 Character
Label Feed
Front Panel
Power On/Off Switch
Front Panel
POTENTIOMETER ADJUSTMENTS
Print Darkness
Front Panel
Offset Front
Panel
Pitch Font
Panel
Display Front
Panel
INTERFACE CONNECTIONS
Parallel IEEE1284
Standard
Serial
RS232C (9600 to 57600 bps) Standard
RS422/485 (9600 to 57600 bps) Optional
Ready/Busy or X-On/X-Off Flow Control
Bi-directional Status
Universal Serial Bus
USB Ver. 1.1 Standard
Ethernet 10/100
BaseT
PROCESSING
CPU
32 Bit RISC
Flash ROM
2 MB
SDRAM 16
MB
Receive Buffer
2.95 MB
Memory Expansion
See Options and Accessories
M-84PRO
Quick
Guide
Pg
2
Installation
Remove the M-84PRO from the packing container. Check to make sure you have the
following:
Careful consideration must be given when selecting the location of the printer, especially to
environmental considerations. To obtain optimum results from M-84PRO, always try to avoid
operation locations influenced by:
•
Direct or bright sunlight, as this will make the label sensor less responsive and may
cause the label to be sensed incorrectly.
•
Locations which have extreme temperature, as this can create electrical problems on
the circuits within the printer.
•
The installed location of the printer should ideally be in areas free from dust,
humidity and sudden vibrations.
Consumables
Always use SATO carbon ribbons and labels or equivalent in the thermal transfer models.
The use of incorrect materials may cause malfunctions of the printer and void the printer
warranty.
Quick Guide