Oki Microline 1120 Safety & Warranty

1: English

MICROLINE

®

 1120

Safety, Warranty and Regulatory Information . . . . . . . . . . . . . 1

Informations de sécurité, de garantie, et de réglementation . . 8

Información sobre seguridad, garantía, y regulaciones . . . . . 15

Informações sobre segurança, garantia, e normativas. . . . . . 24 

Safety Information, 

120-Volt Models

All Countries / Regions

Your OKI printer has been carefully designed to give you years 

of safe, reliable performance. As with all electrical equipment, 

there are a few basic precautions you should take to avoid 

hurting yourself or damaging the printer.

• Carefully read the provided setup and operating instructions.

• Save all provided documentation for future reference.

• Read and follow all warning and instruction labels on the 

printer itself.

• The printhead can get quite hot when it has been printing for 

a length of time. Do not touch the printhead until it has had a 

chance to cool off.

• Unplug the printer before you clean it. Use only a damp cloth; 

do not use liquid or aerosol cleaners.

• Place your printer on a firm, solid surface. If you put it on 

something unsteady, it may fall and be damaged. If you place 

it on a soft surface, such as a rug, sofa, or cushion, the vents 

may be blocked, causing the printer to overheat.

• Protect your printer from overheating. Make sure no 

obstructions block the openings of the printer. Do not put the 

printer on or near a heat source (such as a radiator or heat 

register). Keep the printer out of direct sunlight.

• Always use this printer in a well ventilated area. Allow 

enough room around the printer for adequate ventilation and 

easy access to the paper trays. If you put the printer in any 

kind of enclosure, make sure the enclosure is well ventilated.

• Do not use your printer near water. Do not spill liquid of any 

kind into it. 

• Be certain that your power source matches the rating listed 

on the back of the printer. If you are not sure, check with 

your dealer or with your local power company.

• Do not connect this product to an uninterruptible power 

supply (UPS). For further information please contact Oki Data 

at 1-800-OKI-DATA or www.okiprintingsolutions.com.

• Your printer has a grounded, three-prong plug as a safety 

feature. This plug only fits into a grounded outlet. If the plug 

does not fit, the outlet may be an older, non-grounded type. 

Contact an electrician to have the outlet replaced. Do not use 

an adapter to defeat the grounding.

• Install the printer near an easily accessed power outlet.

• Avoid damaging the power cord. Do not put anything on it or 

place it where it will be walked on. If the cord becomes 

damaged or frayed, replace it immediately.

• If you are using an extension cord or power strip with the 

printer, make sure that the total of the amperes required by 

all the equipment on the extension is less than the 

extension’s rating. The total ratings of all equipment plugged 

into the outlet should not exceed 15 amperes.

• Do not poke anything into the ventilation slots of the printer. 

You could get an electrical shock or cause hazardous 

electrical arcing, which could cause a fire.

• Aside from the routine maintenance described in the 

documentation, do not try to service the printer yourself. 

Removing the cover may expose you to shocks or other 

hazards. 

• Do not make any adjustments other than those outlined in 

the documentation. You may cause damage that will require 

extensive repair work. The provided documentation explains 

how to get your printer serviced by qualified Oki Data 

technicians.

If anything happens that indicates that your printer is not 

working properly or has been damaged, unplug it immediately 

and follow the procedures in the provided documentation for 

having your printer serviced. 

Here are some of the things to look for.

• The power cord or plug is frayed or damaged.

• Liquid has been spilled into the printer, or the printer has 

been exposed to water.

• The printer has been dropped, or the cabinet is damaged.

• The printer does not function normally when you are 

following the operating instructions.

Summary: English Section

Safety Information  . . . . . . . . . . . . . . . . . . . . . .  1-2

Warranty Information . . . . . . . . . . . . . . . . . . . . . . 3

Service and Support  . . . . . . . . . . . . . . . . . . . . . . . 4

Regulatory Information. . . . . . . . . . . . . . . . . . . . . 5

Material Safety Data Sheet (MSDS). . . . . . . . . . . . 6