Oki MICROLINE ML310 Handbook - page 9

|

Printer Handbook:  English

9

3 If you are replacing the ribbon cartridge, grasp the

sides of the cartridge at either side of the printhead

(Caution! printhead can be HOT!), then lift the used

cartridge out and discard it.

4 With the knob side up, tilt the new ribbon cartridge onto

the printhead plate so that it slides into the area of the

plate that is closest to the front of the printer, then lower

the ribbon shield over the printhead (Caution! Printhead

may be HOT!), aligning the tabs with the inserts on the

printhead plate.

✔ If the ribbon won’t load easily, turn the knob slightly

until the x-shaped notch on the bottom of the ribbon

cartridge aligns with the x-shaped insert on the ribbon

plate.

5 Press on the cartridge until you feel it snap into place.

6 If you are replacing the ribbon cartridge, put the access

cover back on and press down until it snaps into place,

then replace the acoustic cover.