1. DL manuals
  2. Oki
  3. Storage
  4. C7200
  5. User Manual

Oki C7200 User Manual

Manual is about: Service Manual

Summary of C7200

  • Page 1

    Okilan 6020e ® pocket print server user’s guide high performance 10/100 base-t ethernet network print server.

  • Page 2

    Ii copyright and trademark information oki okilan 6020e user’s guide every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki data assumes no responsibility for the results of errors beyond its control. Oki data also cannot guarantee that ...

  • Page 3: Organization

    Iii organization and contents oki okilan 6020e user’s guide organization this manual has been divided into eight sections. Section i contains and installation instructions for the okilan 6020e print server. Section ii contains information about management features, an extremely valuable set of okila...

  • Page 4: Index

    Iv organization and contents oki okilan 6020e user’s guide section iv: tcp/ip .................................................. Iv-1 chapter 1: introduction ................................................ Iv-5 chapter 2: configuring the okilan 6020e ................ Iv-7 chapter 3: tcp/ip configur...

  • Page 5: Network Operating Systems

    V network operating systems oki okilan 6020e user’s guide network operating systems overview okilan 6020e simultaneously supports several network protocols in various combinations. Below is a list of supported network protocols accompanied with nos/os requirements. Tcp/ip and windows nt tcp/ip, ftp ...

  • Page 6: Service Information

    Vi technical support oki okilan 6020e user’s guide service information note: this information is valid for the united states and canada only. Oki data on line visit the oki data web site at http://www.Okidata.Com for the latest information on: • software drivers • product guides • customer support •...

  • Page 7: Oki Data Service Centers

    Vii technical support oki okilan 6020e user’s guide oki data customer support representatives agents are available 24 hours a day, 7 days a week at 1-800-oki-data (1-800-654-3282). Please be sure that you are calling from a telephone close to your printer, so you can describe your problem accurately...

  • Page 8: Brazil

    Viii technical support oki okilan 6020e user’s guide brazil oki data do brasil, ltda. Tel: 0800-11-5577 fax: 55-11-5012-0267 mexico oki data de mexico, s.A. De c.V. Tel: 525-263-8780 fax: 525-250-3501.

  • Page 9

    Ix technical support oki okilan 6020e user’s guide when you call technical support, the following information will help us answer your questions more quickly and accurately. Please be able to identify the following: • okilan model number • serial number • configuration sheet settings • type of netwo...

  • Page 10

    X technical support oki okilan 6020e user’s guide.

  • Page 11: Hardware Installation

    Hardware installation section i: hardware installation.

  • Page 12

    I - 2 section i - hardware installation oki okilan 6020e user’s guide.

  • Page 13: Hardware Installation

    Hardware installation i - 3 section i - hardware installation oki okilan 6020e user’s guide in this section powering on the okilan 6020e ................ I-7 printing a configuration sheet ..................... I-8.

  • Page 14

    I - 4 section i - hardware installation oki okilan 6020e user’s guide.

  • Page 15: Hardware Installation

    Hardware installation i - 5 section i - hardware installation oki okilan 6020e user’s guide the okilan 6020e pocket print server enables ethernet network users to connect to a printer with a bidirectional parallel port. The okilan 6020e can be made to work with any centronics or ieee-1284 paral- lel...

  • Page 16

    I - 6 section i - hardware installation oki okilan 6020e user’s guide 3. Secure the okilan 6020e with the wire clips on the printer’s connector. 4. Plug the power adapter wire into the power jack on the okilan 6020e. Then plug the power adapter into a 120 vac wall outlet. Please note that some count...

  • Page 17: Hardware Installation

    Hardware installation i - 7 section i - hardware installation oki okilan 6020e user’s guide 5. Attach the 10/100base-t utp cable to the recep- tacle on the back of the okilan 6020e. Attach the other end of the cable to the network. Powering on the okilan 6020e turn printer power on. The red and gree...

  • Page 18

    I - 8 section i - hardware installation oki okilan 6020e user’s guide note: if the red and green indicators do not display as indicated above, see hardware troubleshooting at the end of this section. Printing a configuration sheet to print configuration information, press the test button on the fron...

  • Page 19: Hardware Installation

    Hardware installation i - 9 section i - hardware installation oki okilan 6020e user’s guide installing the okilan 6020e software utilities introduction your okilan 6020e pocket print server comes with two types of software utilities: okiview 32 and okinet utilities. Okiview 32 okiview 32 is a genera...

  • Page 20: Software In Windows

    I - 10 section i - hardware installation oki okilan 6020e user’s guide installing the okilan utilities software in windows 1. Insert the okilan cd into your cd-rom drive. 2. The setup screen appears automatically (if it doesn’t, click start ®run, then enter d:\setup, if “d” is your cd-rom drive). 3....

  • Page 21: Hardware Installation

    Hardware installation i - 11 section i - hardware installation oki okilan 6020e user’s guide okinet for the apple ® macintosh ® utility note: the okilan utilities cd is designed for more than one type of okilan print server and includes features that do not apply to the okilan 6020e. Specifi- cally,...

  • Page 22: Solution

    I - 12 section i - hardware installation oki okilan 6020e user’s guide solution a) unplug the okilan 6020e power adapter from the wall outlet. Remove the network cable. Plug the network cable back in until you hear a positive click. Check the other end of the cable in the same manner. Plug the okila...

  • Page 23: Hardware Installation

    Hardware installation i - 13 section i - hardware installation oki okilan 6020e user’s guide led display green indicator is flashing slowly (1 timer/sec); the okilan 6020e is trying to print a job. Problem the printer is malfunctioning or does not have sufficient paper or toner. Solution verify that...

  • Page 24: Led Display

    I - 14 section i - hardware installation oki okilan 6020e user’s guide led display the red and green indicators are alternately flashing for longer than two minutes. Problem the okilan 6020e is in firmware download mode. This means it is waiting for new firmware to be sent before it will continue fu...

  • Page 25: Advanced Management

    Advanced management section ii: advanced management features.

  • Page 26: In This Section

    Ii - 2 section 2 - advanced management features oki okilan 6020e user’s guide in this section chapter 1 snmp ...................................................... Ii-3 overview ....................................................... Ii-3 private mib ....................................................

  • Page 27: Advanced Management

    Ii - 3 section 2 - chapter 1 - snmp oki okilan 6020e user’s guide advanced management chapter 1 simple network management protocol (snmp) overview simple network management protocol (snmp) provides network administrators with the ability to communicate management functions between an snmp manager an...

  • Page 28: Traps

    Ii - 4 section 2 - chapter 1 - snmp oki okilan 6020e user’s guide note: if you attempt a reset while a job is printing, the job may not print successfully. Certain variables are critical, that is, they change a fundamental operating parameter of the okilan 6020e. These variables are saved by the oki...

  • Page 29: Advanced Management

    Ii - 5 section 2 - chapter 1 - snmp oki okilan 6020e user’s guide advanced management in order to receive okinet alert traps, the okilan 6020e must have bi-directional status enabled (it is disabled by default). Extended status can be enabled through the okilan 6020e configuration utility (telnet) f...

  • Page 30: Chapter 2

    Ii - 6 section 2 - chapter 2 - hp jetadmin support oki okilan 6020e user’s guide chapter 2 hp jetadmin support overview this section contains instructions and information on how to configure and obtain diagnostic information from your okilan 6020e using the hewlett-packard jetadmin software. Softwar...

  • Page 31: Advanced Management

    Ii - 7 section 2 - chapter 2 - hp jetadmin support oki okilan 6020e user’s guide advanced management 7. Select the desired queues from the list of available queues to be added into service. Click the service button to move the selection to the serviced queues column. When all queues have been added,...

  • Page 32: Chapter 3

    Ii - 8 section 2 - chapter 3 - hp web jetadmin support oki okilan 6020e user’s guide chapter 3 hp web jetadmin support overview this section contains instructions and information on how to configure, install, and obtain diagnostic information from your okilan 6020e using the hewlett-packard web jeta...

  • Page 33: Advanced Management

    Ii - 9 section 2 - chapter 3 - hp web jetadmin support oki okilan 6020e user’s guide advanced management 4. On the install printer page 1 page, select an nt domain from the pull-down menu. Enter the user name and password of a domain user with sufficient rights to create a printer and click the cont...

  • Page 34: Chapter 4

    Ii - 10 section 2 - chapter 4 - okilan 6020e web configuration oki okilan 6020e user’s guide chapter 4 okilan 6020e web configuration overview this section contains instructions and information on how to configure and manage your okilan 6020e using a standard web browser. Software requirements tcp/i...

  • Page 35: Advanced Management

    Ii - 11 section 2 - chapter 4 - okilan 6020e web configuration oki okilan 6020e user’s guide advanced management note: as a layer of security, the tcp port number that the device uses to communicate with browsers, called the http port, can be modified from a default of 80. If the port is modified, t...

  • Page 36: Configuration

    Ii - 12 section 2 - chapter 5 - additional management features oki okilan 6020e user’s guide configuration 1. Select the login as admin link under the configuration menu. 2. On the enter network password screen, enter the user name and password. The default administrator user name is admin. The defa...

  • Page 37: Advanced Management

    Ii - 13 section 2 - chapter 4 - okilan 6020e web configuration oki okilan 6020e user’s guide advanced management 5. A request results page will appear indicating one of the following: • configuration successfully set: the values have been successfully saved to the print server. Go to another page to...

  • Page 38: Interface:

    Ii - 14 section 2 - chapter 5 - additional management features oki okilan 6020e user’s guide * the following values are currently only configurable through the web browser interface: web admin configuration under the configuration menu, select the admin(web) link. • admin name - the name used to acc...

  • Page 39: Advanced Management

    Ii - 15 section 2 - chapter 4 - okilan 6020e web configuration oki okilan 6020e user’s guide advanced management status the home page for the print server shows general status information including the status of all printers currently attached. For more detailed status information, select the view c...

  • Page 40: Reset

    Ii - 16 section 2 - chapter 5 - additional management features oki okilan 6020e user’s guide reset reset reset the print server by selecting the reset link under the reset menu. A message will appear asking you to confirm the reset. Restore select restore defaults under the reset menu to restore sel...

  • Page 41: Advanced Management

    Ii - 17 section 2 - chapter 4 - okilan 6020e web configuration oki okilan 6020e user’s guide advanced management troubleshooting server connection • the print server only supports two simultaneous http connections. If your browser fails to connect to the print server, the browser may be trying to op...

  • Page 42: Chapter 5

    Ii - 18 section 2 - chapter 5 - additional management features oki okilan 6020e user’s guide chapter 5 additional management features okinet alert oki okinet alert enterprise management utility allows administrators to proactively manage printers by being immediately alerted to printing problems bef...

  • Page 43: Advanced Management

    Ii - 19 section 2 - chapter 5 - additional management features oki okilan 6020e user’s guide advanced management okinet for nds okinet for nds allows administrators to create and manage oki print server objects in the nds tree. Okinet for nds integrates into novell’s netware administrator, netwaread...

  • Page 44

    Ii - 20 section 2 - chapter 5 - additional management features oki okilan 6020e user’s guide.

  • Page 45: Netw

    Netw are section iii: netware.

  • Page 46: In This Section

    Iii - 2 section 3 - netware oki okilan 6020e user’s guide in this section chapter 1 introduction ........................................... Iii-4 overview ...................................................... Iii-4 before you start ........................................... Iii-4 selecting pserve...

  • Page 47: Netw

    Iii - 3 section 3 - netware oki okilan 6020e user’s guide netw are chapter 3 okinet for nds .................................... Iii-24 overview .................................................... Iii-24 installing okinet for nds for novell netware 4.1 .................................................

  • Page 48: Chapter 1: Introduction

    Iii - 4 section 3 - chapter 1 - introduction oki okilan 6020e user’s guide chapter 1: introduction overview this section contains instructions and information on how to configure your okilan 6020e in the netware environment. There are three environments in which to configure the okilan 6020e: • bind...

  • Page 49: Netw

    Iii - 5 section 3 - chapter 1 - introduction oki okilan 6020e user’s guide netw are selecting pserver or rprinter/nprinter mode your okilan 6020e supports both pserver and nprinter mode. There are several factors to consider when choosing which mode to use. In pserver mode, the okilan 6020e operates...

  • Page 50: Chapter 2

    Iii - 6 section 3 - chapter 2 - okinet for netware oki okilan 6020e user’s guide chapter 2 okinet for netware overview this chapter contains information about how to configure the okilan 6020e in bindery and nds environments using the okinet for netware utility. Note: okinet for netware contains min...

  • Page 51: Netw

    Iii - 7 section 3 - chapter 2 - okinet for netware oki okilan 6020e user’s guide netw are running okinet for netware to run the utility, double-click on the okinet icon. The main okinet for netware screen will display. By default, the all print servers view is selected and all print servers attached...

  • Page 52: Pserver Or Rprinter Mode

    Iii - 8 section 3 - chapter 2 - okinet for netware oki okilan 6020e user’s guide netware configuration options to configure options specific to the netware protocol, select the netware file tab. The following screen will display: pserver or rprinter mode several factors should be considered when cho...

  • Page 53: Netw

    Iii - 9 section 3 - chapter 2 - okinet for netware oki okilan 6020e user’s guide netw are nds settings nds settings need to first be created and setup using the nwadmin or pconsole utility. Create an nds print server object. Then, create one nds printer object per output port. For example, printer 1...

  • Page 54: Netware Queue Load Balancing

    Iii - 10 section 3 - chapter 2 - okinet for netware oki okilan 6020e user’s guide netware queue load balancing print jobs can be distributed to multiple printers on selected queues by selecting the same queue multiple times and selecting a different output port for each queue entry. Netware port con...

  • Page 55: Netw

    Iii - 11 section 3 - chapter 2 - okinet for netware oki okilan 6020e user’s guide netw are ethertalk configuration options to modify configuration settings specific to the ethertalk protocol such as the name and zone. For specific information on other ethertalk options, see section vii, ethertalk, o...

  • Page 56: Printer Type

    Iii - 12 section 3 - chapter 2 - okinet for netware oki okilan 6020e user’s guide • postscript - inserts the appropriate character string in front of each print job to switch the printer to the postscript printer language. • automatic - enables the auto language sensing function. This function exami...

  • Page 57: Netw

    Iii - 13 section 3 - chapter 2 - okinet for netware oki okilan 6020e user’s guide netw are bidirectional printer status support enable this option for enhanced status from bi-directional printers that support pjl. Output type select the desired level of support for 1284 communications. The following...

  • Page 58: System Name

    Iii - 14 section 3 - chapter 2 - okinet for netware oki okilan 6020e user’s guide fill in the following information: system name enter the name of your choice. This name will identify the okilan 6020e in your snmp-based management program. System contact enter any information useful to a user if pro...

  • Page 59: Netw

    Iii - 15 section 3 - chapter 2 - okinet for netware oki okilan 6020e user’s guide netw are trap community name enter the community name which will be used when traps are sent from the okilan 6020e. This setting allows trap utilities to only accept traps from devices with appropriate community names....

  • Page 60: Trap Destination

    Iii - 16 section 3 - chapter 2 - okinet for netware oki okilan 6020e user’s guide trap destination • netware protocol - enter the network number and hardware address, respectively, to which traps will be sent. To broadcast traps to all addresses on all networks, enter ffffffff (8 characters) in the ...

  • Page 61: Netw

    Iii - 17 section 3 - chapter 2 - okinet for netware oki okilan 6020e user’s guide netw are enabling/disabling protocols to enable or disable protocols on the okilan 6020e, select the protocols file tab. Select each protocol you wish to enable. If you disable a protocol, the okilan 6020e will no long...

  • Page 62: Output Ports

    Iii - 18 section 3 - chapter 2 - okinet for netware oki okilan 6020e user’s guide caution: make sure there are no print jobs active when you reset the okilan 6020e. All protocols will be restarted. If you attempt a reset while a job is printing, the job may not print successfully. Restoring factory ...

  • Page 63: Netw

    Iii - 19 section 3 - chapter 2 - okinet for netware oki okilan 6020e user’s guide netw are caution: make sure there are no active print jobs when you select restore factory defaults. If you reset the okilan 6020e while a job is printing, the job may not print successfully. Creating customized views ...

  • Page 64: Modifying View Settings

    Iii - 20 section 3 - chapter 2 - okinet for netware oki okilan 6020e user’s guide modifying view settings before modifying the settings, select the name of the view you wish to edit from the name field. Display filter the filter option displays only those print servers matching specific criteria. Th...

  • Page 65: Netw

    Iii - 21 section 3 - chapter 2 - okinet for netware oki okilan 6020e user’s guide netw are • specify devices/networks - this method adds specific print servers (or groups of print servers) to the list. This can be useful when only a subset of the list of okilan 6020e products is desired. To select a...

  • Page 66: Refresh

    Iii - 22 section 3 - chapter 2 - okinet for netware oki okilan 6020e user’s guide refresh the refresh rate defines how often the okinet for netware utility updates the main print server list. To define a refresh rate, select the automatic refresh box and then enter the refresh rate in the field prov...

  • Page 67: Netw

    Iii - 23 section 3 - chapter 2 - okinet for netware oki okilan 6020e user’s guide netw are set community name enter the set community name necessary to access the okilan 6020e or group of okilan 6020e products selected. Add select the add button to define access to a new okilan 6020e or a group of o...

  • Page 68: Chapter 3

    Iii - 24 section 3 - chapter 3 - okinet for nds oki okilan 6020e user’s guide chapter 3 okinet for nds overview okinet for nds is a dynamic link library (dll) which allows users to create and manage oki print server objects in the nds tree. Okinet for nds integrates into novell’s netware administrat...

  • Page 69: Netw

    Iii - 25 section 3 - chapter 3 - okinet for nds oki okilan 6020e user’s guide netw are refer to the following table to determine which method to use to install okinet for nds: netware version client operating system windows 3.X windows 95/98 windows nt/2000 netware 4.1 see installing okinet for nds ...

  • Page 70: Windows 3.X

    Iii - 26 section 3 - chapter 3 - okinet for nds oki okilan 6020e user’s guide installing okinet for nds for novell netware 4.X, netware 5.X, and windows 3.X okinet for nds must be installed in the same location you have installed netware administrator. This may be located on the file server or on an...

  • Page 71: Netw

    Iii - 27 section 3 - chapter 3 - okinet for nds oki okilan 6020e user’s guide netw are installing okinet for nds for novell netware 4.X, netware 5.X, windows 95/98 and windows nt/2000 okinet for nds must be installed in the same location you have installed netware administrator. This may be located ...

  • Page 72: 4. Click Ok.

    Iii - 28 section 3 - chapter 3 - okinet for nds oki okilan 6020e user’s guide creating a new okilan 6020e object to create a new okilan 6020e object from novell’s netware administrator, perform the following steps: 1. Select the container (also known as organizational unit) in which you want the obj...

  • Page 73: Netw

    Iii - 29 section 3 - chapter 3 - okinet for nds oki okilan 6020e user’s guide netw are note: if the device list box is still empty, select find device. This will allow you to locate the specific device you are trying to define. You will be prompted for the ethernet address and network number of the ...

  • Page 74: 6. Select Assign.

    Iii - 30 section 3 - chapter 3 - okinet for nds oki okilan 6020e user’s guide 6. Select assign. 7. Select or create a netware printer object from the printer/queue assignments dialog. 8. Select or create a netware print queue object from the printer/queue assignments dialog. 9. Select ok to save you...

  • Page 75: Netw

    Iii - 31 section 3 - chapter 3 - okinet for nds oki okilan 6020e user’s guide netw are configuring the okilan 6020e using okinet for nds the following steps outline how to configure an okilan 6020e. 1. From the nwadmin screen, select (double-click) the okilan 6020e you wish to configure. 2. Set the ...

  • Page 76

    Iii - 32 section 3 - chapter 3 - okinet for nds oki okilan 6020e user’s guide the install utility on the installation diskette can also be used to remove the oki print server class. This utility removes the class from novell’s netware administrator and removes all the associated files that were copi...

  • Page 77: Netw

    Iii - 33 section 3 - chapter 4 - using the okilan 6020e in ndps oki okilan 6020e user’s guide netw are chapter 4 using the okilan 6020e in ndps (netware 4.X and 5.1) introduction novell distributed print services  (ndps ) is novell’s new printing architecture for use with netware versions 4.X and 5...

  • Page 78

    Iii - 34 section 3 - chapter 4 - using the okilan 6020e in ndps oki okilan 6020e user’s guide 7. Click browse to display the select printer driver dialog box. Locate the appropriate printer driver .Inf file. 8. Select the .Inf file and click ok. The .Inf file and path is selected in the resource loc...

  • Page 79: Netw

    Iii - 35 section 3 - chapter 4 - using the okilan 6020e in ndps oki okilan 6020e user’s guide netw are setting up the okilan 6020e through nwadmin32 there are two types of printers available with ndps. One is public access, which anyone on the tree can get to. The other is private access, which requ...

  • Page 80: Through Nwadmin32

    Iii - 36 section 3 - chapter 4 - using the okilan 6020e in ndps oki okilan 6020e user’s guide private access printers: these can only be created through nwadmin32 1. Create ndps manager in nwadmin32. 2. Go to the context in which the private printer is to reside. 3. Select create. The new object scr...

  • Page 81: Netw

    Iii - 37 section 3 - chapter 4 - using the okilan 6020e in ndps oki okilan 6020e user’s guide netw are setting up the okilan 6020e for public access printers at the file server console 1. Create ndps manager in nwadmin32. 2. Load the ndps manager on the file server. 3. Select insert new printer agen...

  • Page 82

    Iii - 38 section 3 - chapter 4 - using the okilan 6020e in ndps oki okilan 6020e user’s guide.

  • Page 83: Tcp/ip

    Tcp/ip section iv: tcp/ip.

  • Page 84: In This Section

    Iv - 2 section 4 - tcp/ip oki okilan 6020e user’s guide in this section chapter 1introduction ........................................... Iv-5 overview ................................................................................... Iv-5 software requirements ........................................

  • Page 85: Tcp/ip

    Iv - 3 section 4 - tcp/ip oki okilan 6020e user’s guide tcp/ip saving the configuration ........................................................ Iv-34 displaying okilan 6020e diagnostic information ............... Iv-34 printing a configuration sheet ................................................ ...

  • Page 86

    Iv - 4 section 4 - tcp/ip oki okilan 6020e user’s guide configuring sco unix for printing with the okilan 6020e ................................................... Iv-73 ibm’s aix ver. 3.X for printing with the okilan 6020e ................................................... Iv-75 configuring solari...

  • Page 87: Tcp/ip

    Iv - 5 section 4 - chapter 1 - introduction oki okilan 6020e user’s guide tcp/ip chapter 1 introduction overview this section contains instructions and information on how to configure your okilan 6020e. You will also be instructed on how to set up your host computers to print to the okilan 6020e usi...

  • Page 88: Network Preparation

    Iv - 6 section 4 - chapter 1 - introduction oki okilan 6020e user’s guide network preparation • you should be familiar with network administration as well as the physical setup and operation of your network. • advise users of possible disruption during installation. • make sure the serial number and...

  • Page 89: Tcp/ip

    Iv - 7 section 4 - chapter 2 - configuring the okilan 6020e oki okilan 6020e user’s guide tcp/ip chapter 2 configuring the okilan 6020e choosing an ip address every tcp/ip network device is required to have a unique ip address. The ip address can be permanently stored using one of the following: • o...

  • Page 90: Configuring The Okilan 6020E

    Iv - 8 section 4 - chapter 2 - configuring the okilan 6020e oki okilan 6020e user’s guide configuring the okilan 6020e there are four utilities available to configure the okilan 6020e for tcp/ip printing. You may use whichever utility is best suited for your needs. • okinet for tcp/ip - windows tcp/...

  • Page 91: Tcp/ip

    Iv - 9 section 4 - chapter 2 - configuring the okilan 6020e oki okilan 6020e user’s guide tcp/ip gleaning if an ip address has not been permanently assigned when the okilan 6020e is powered on or reset, it will look for a ping packet on the network. If the okilan 6020e receives a ping packet within ...

  • Page 92: Dhcp

    Iv - 10 section 4 - chapter 2 - configuring the okilan 6020e oki okilan 6020e user’s guide dhcp the dynamic host configuration protocol (dhcp) provides a framework for passing configuration information to hosts on a tcp/ip network in a client/ server fashion. Dhcp is based on the bootstrap protocol ...

  • Page 93: Tcp/ip

    Iv - 11 section 4 - chapter 2 - configuring the okilan 6020e oki okilan 6020e user’s guide tcp/ip static route entry when the okilan 6020e is powered on or reset and no permanent ip address has been assigned, it will attempt to obtain an ip address through gleaning, rarp, bootp or dhcp. If the okila...

  • Page 94: Other Utilities

    Iv - 12 section 4 - chapter 2 - configuring the okilan 6020e oki okilan 6020e user’s guide most unix operating systems support either the rarp or bootp protocol. To find out which protocol your operating system supports, request the manual page for the protocol’s daemon (e.G. Man bootpd or man rarpd...

  • Page 95: Tcp/ip

    Iv - 13 section 4 - chapter 2 - configuring the okilan 6020e oki okilan 6020e user’s guide tcp/ip verifying access to the okilan 6020e use the ping utility to verify access to the okilan 6020e. Ping ip address of okilan 6020e> if the okilan 6020e does not respond, your network or the device is not c...

  • Page 96: Chapter 3

    Iv - 14 section 4 - chapter 3 - tcp/ip configuration and printing oki okilan 6020e user’s guide chapter 3 tcp/ip configuration and printing overview the okilan 6020e supports printing from computers using tcp/ip and any of the following printing protocols: • line printer redirect/line printer daemon...

  • Page 97: Tcp/ip

    Iv - 15 section 4 - chapter 3 - tcp/ip configuration and printing oki okilan 6020e user’s guide tcp/ip configuring for tcp/ip network printing most computers that support tcp/ip network printing use the remote line printer daemon (lpd) protocol. This protocol was originally part of the berkeley soft...

  • Page 98

    Iv - 16 section 4 - chapter 3 - tcp/ip configuration and printing oki okilan 6020e user’s guide the okilan 6020e will parse the remote queue name and search for certain characters at the end which tell how to convert an ascii print job. The print server uses ff, lf and nf as ascii conversion specifi...

  • Page 99: Tcp/ip

    Iv - 17 section 4 - chapter 3 - tcp/ip configuration and printing oki okilan 6020e user’s guide tcp/ip configuring a bsd-style print queue for remote bsd-style lpd printing, add the okilan 6020e as a remote printer in the “/etc/printcap” database to each host printing to the okilan 6020e. You can ad...

  • Page 100: Log_File_Name

    Iv - 18 section 4 - chapter 3 - tcp/ip configuration and printing oki okilan 6020e user’s guide log_file_name this is the path to a file where error information from the lpd will be logged. Example: if you are printing to an ascii printer that requires a carriage return/line feed, you may need two s...

  • Page 101: Tcp/ip

    Iv - 19 section 4 - chapter 3 - tcp/ip configuration and printing oki okilan 6020e user’s guide tcp/ip note: the remote lpd implementation of the okilan 6020e does not support any unix lpd input or output filters or the direct printing of banner pages. It is possible to configure some unix systems s...

  • Page 102: Type

    Iv - 20 section 4 - chapter 3 - tcp/ip configuration and printing oki okilan 6020e user’s guide type changes the representation type used for data transfer. Image (or binary) and ascii are the only types supported. Ascii equivalent to “type ascii.” binary equivalent to “type binary.” image equivalen...

  • Page 103: Tcp/ip

    Iv - 21 section 4 - chapter 3 - tcp/ip configuration and printing oki okilan 6020e user’s guide tcp/ip example: the following example prints a postscript file called chart.Ps to the okilan 6020e printer port 1 using ftp. $ ftp okilan 6020e_name connected to okilan 6020e_name. 220 esi-2810 version 3....

  • Page 104: Raw Port Printing

    Iv - 22 section 4 - chapter 3 - tcp/ip configuration and printing oki okilan 6020e user’s guide raw port printing host computer software can use a raw tcp/ip port connection to send data to the okilan 6020e. A tcp/ ip port has been assigned to the output port of the okilan 6020e as follows: tcp/ip p...

  • Page 105: Tcp/ip

    Iv - 23 section 4 - chapter 4 - okinet for tcp/ip oki okilan 6020e user’s guide tcp/ip chapter 4 okinet for tcp/ip overview this section contains information about okinet for tcp/ip. Okinet for tcp/ip provides snmp-based support for the entire okilan 6020e family of print servers. Okinet for tcp/ip ...

  • Page 106: Running Okinet For Tcp/ip

    Iv - 24 section 4 - chapter 4 - okinet for tcp/ip oki okilan 6020e user’s guide running okinet for tcp/ip to run the utility, double-click on the okinet icon. The main okinet for tcp/ip screen will display. By default, the all print servers view is selected and all print servers attached to the subn...

  • Page 107: Tcp/ip

    Iv - 25 section 4 - chapter 4 - okinet for tcp/ip oki okilan 6020e user’s guide tcp/ip configuring tcp/ip options to configure options specific to the tcp/ip protocol, select the tcp/ip tab. The following screen will display: fill in the following information: ip address resolution • set permanent -...

  • Page 108: Subnet Mask

    Iv - 26 section 4 - chapter 4 - okinet for tcp/ip oki okilan 6020e user’s guide subnet mask if your network environment includes subnets, you will want to set the subnet mask. The subnet mask must follow the format xxx.Xxx.Xxx.Xxx, where each xxx is a number from 0 to 255. The default subnet mask is...

  • Page 109: Tcp/ip

    Iv - 27 section 4 - chapter 4 - okinet for tcp/ip oki okilan 6020e user’s guide tcp/ip telnet/http password: allows you to modify the current password required for telnet or http access the default password is the serial number of the okilan 6020e. Netware and netware port configuration options for ...

  • Page 110: Port Number

    Iv - 28 section 4 - chapter 4 - okinet for tcp/ip oki okilan 6020e user’s guide ethertalk configuration options to modify the configuration settings specific to the ethertalk protocol such as the name and zone. For specific information on ethertalk options, see section vi, ethertalk, or select the h...

  • Page 111: Tcp/ip

    Iv - 29 section 4 - chapter 4 - okinet for tcp/ip oki okilan 6020e user’s guide tcp/ip • off - print data stream will be sent directly to the output port without alteration. • pcl - inserts the appropriate character string in front of each print job to switch the printer to the pcl print language. •...

  • Page 112: Output Type

    Iv - 30 section 4 - chapter 4 - okinet for tcp/ip oki okilan 6020e user’s guide output type select the appropriate baud rate. Bidirectional printer status support enable this option for enhanced status from the bidirectional printer. Snmp configuration options snmp options specify which information ...

  • Page 113: Tcp/ip

    Iv - 31 section 4 - chapter 4 - okinet for tcp/ip oki okilan 6020e user’s guide tcp/ip system contact enter any information useful to a user if problems with the okilan 6020e arise. System location enter a description of the okilan 6020e location. Get community name this field is used to set the com...

  • Page 114: Enabling/disabling Protocols

    Iv - 32 section 4 - chapter 4 - okinet for tcp/ip oki okilan 6020e user’s guide enabling/disabling protocols to enable or disable protocols on the okilan 6020e, select the protocols tab. Select each protocol you wish to enable. If you disable a protocol, the okilan 6020e will no longer communicate u...

  • Page 115: Tcp/ip

    Iv - 33 section 4 - chapter 4 - okinet for tcp/ip oki okilan 6020e user’s guide tcp/ip trap destination • tcp/ip protocol - enter the ip address to which traps will be sent. The ip address must follow the format xxx.Xxx.Xxx.Xxx, where each xxx is a number from 0 to 255. To broadcast traps to all hos...

  • Page 116: Saving The Configuration

    Iv - 34 section 4 - chapter 4 - okinet for tcp/ip oki okilan 6020e user’s guide saving the configuration once all settings have been defined, select ok. The settings will be saved and you will be returned to the main okinet for tcp/ip screen. Displaying okilan 6020e diagnostic information to view ok...

  • Page 117: Tcp/ip

    Iv - 35 section 4 - chapter 4 - okinet for tcp/ip oki okilan 6020e user’s guide tcp/ip restoring factory default settings to restore the okilan 6020e to factory default settings, select the okilan 6020e from the list of available print servers. From the print server menu bar, select reset. From the ...

  • Page 118: Creating Customized Views

    Iv - 36 section 4 - chapter 4 - okinet for tcp/ip oki okilan 6020e user’s guide creating customized views okinet for tcp/ip allows users to create multiple customized views for the list of okilan 6020e products. By creating different views, the user can narrow the information displayed to that which...

  • Page 119: Tcp/ip

    Iv - 37 section 4 - chapter 4 - okinet for tcp/ip oki okilan 6020e user’s guide tcp/ip modifying view settings before modifying the settings, select the name of the view you wish to edit from the name field. Sort the sort option displays the okilan 6020e list in a specific order. The list can also b...

  • Page 120: Search Filter

    Iv - 38 section 4 - chapter 4 - okinet for tcp/ip oki okilan 6020e user’s guide search filter the search option defines the criteria for identifying okilan 6020e products on the network. • search local network - this method broadcasts a discovery request to locate all okilan 6020e print servers on t...

  • Page 121: Tcp/ip

    Iv - 39 section 4 - chapter 4 - okinet for tcp/ip oki okilan 6020e user’s guide tcp/ip for example, if you currently have three columns displayed and you wish to add a fourth column to the far left of the screen, follow these steps: 1. Select the first column in the columns displayed field. 2. Selec...

  • Page 122: Ip Address

    Iv - 40 section 4 - chapter 4 - okinet for tcp/ip oki okilan 6020e user’s guide to configure okinet for tcp/ip to use the correct community names, select special options from the file menu. Ip address this field displays the address of each okilan 6020e for which okinet for tcp/ip has defined access...

  • Page 123: Tcp/ip

    Iv - 41 section 4 - chapter 4 - okinet for tcp/ip oki okilan 6020e user’s guide tcp/ip configuring the discovery udp port number in order to discover okilan 6020e print servers on the network, okinet for tcp/ip communicates with the okilan 6020e print servers on a udp port number. Normally, using th...

  • Page 124: Chapter 5

    Iv - 42 section 4 - chapter 5 - web configuration oki okilan 6020e user’s guide chapter 5 web configuration if the dhcp protocol is enabled as a default, the print server may be accessed through an ordinary internet web browser, such as netscape navigator or microsoft internet explorer. See section ...

  • Page 125: Tcp/ip

    Iv - 43 section 4 - chapter 6 - telnet configuration oki okilan 6020e user’s guide tcp/ip chapter 6 telnet configuration overview the okilan 6020e configuration utility (telnet) provides system, network and printer status information and allows you to change the configuration of your okilan 6020e. N...

  • Page 126: Enter.

    Iv - 44 section 4 - chapter 6 - telnet configuration oki okilan 6020e user’s guide ***************************************** okilan 6020e configuration utility 1. Show network/printer information 2. Change password 3. Specify print server ip address 4. Specify subnet mask for your network 5. Identif...

  • Page 127: Tcp/ip

    Iv - 45 section 4 - chapter 6 - telnet configuration oki okilan 6020e user’s guide tcp/ip specify print server ip address (option 3) this option allows you to select the method the okilan 6020e uses to obtain its ip address or to set a permanent ip address. If the okilan 6020e has been configured to...

  • Page 128: Configure Port (Option 6)

    Iv - 46 section 4 - chapter 6 - telnet configuration oki okilan 6020e user’s guide note: if you select an invalid subnet mask you may not be able to access the okilan 6020e. Use this option with care! Identify default gateway ip address (option 5) if your local network is attached to other networks,...

  • Page 129: Tcp/ip

    Iv - 47 section 4 - chapter 6 - telnet configuration oki okilan 6020e user’s guide tcp/ip configure printer type this option enables you to indicate the printer type to which the okilan 6020e is connected. Printer choices are: 1. Oki data printer. 2. Custom printer. • language switching sequence - i...

  • Page 130: Not Print Successfully.

    Iv - 48 section 4 - chapter 6 - telnet configuration oki okilan 6020e user’s guide restore to factory default configuration (option 9) this option automatically restores the okilan 6020e to its original factory defaults. Be aware that when you restore the okilan 6020e to the original factory default...

  • Page 131: Tcp/ip

    Iv - 49 section 4 - appendix a - troubleshooting oki okilan 6020e user’s guide tcp/ip appendix a troubleshooting main status indicator upon power-up, the main status indicator flashes orange. It changes to green when the okilan 6020e passes self-test. The indicator stays orange if the okilan 6020e f...

  • Page 132: Unable to Assign Ip Address

    Iv - 50 section 4 - appendix a - troubleshooting oki okilan 6020e user’s guide unable to assign ip address gleaning if you ping the device and are not getting a response, the glean is not working. Check the following possible problems: • verify the arp table contains the correct hardware and ip addr...

  • Page 133: Tcp/ip

    Iv - 51 section 4 - appendix a - troubleshooting oki okilan 6020e user’s guide tcp/ip unix bootp if you are running unix, try the following methods with the bootp server (check the documentation for your particular unix flavor). • verify the bootp server has reread the “/etc/ bootptab” file when the...

  • Page 134: Static Route Entry

    Iv - 52 section 4 - appendix a - troubleshooting oki okilan 6020e user’s guide static route entry if the okilan 6020e has printed a configuration page showing the default address, but it cannot be reached through telnet, check the following: • display the host’s routing tables with the ‘netstat - r’...

  • Page 135: Tcp/ip

    Iv - 53 section 4 - appendix a - troubleshooting oki okilan 6020e user’s guide tcp/ip okinet for tcp/ip - winsock errors • if you see an error before okinet for tcp/ip appears on the screen, try setting a host name in the host’s file in the windows directory (check the documentation for your windows...

  • Page 136: Unable to Print

    Iv - 54 section 4 - appendix a - troubleshooting oki okilan 6020e user’s guide printing a configuration page if the status indicator turns solid orange due to an error and no configuration page is printed, your printer may be configured for postscript operation. If so, you must re-configure your pri...

  • Page 137: Tcp/ip

    Iv - 55 section 4 - appendix a - troubleshooting oki okilan 6020e user’s guide tcp/ip • if the ftp succeeds, there is a problem with the lpr/ lp setup. Verify the hostname or ip address is correctly set for the queue. Try doing an lpstat (system v) or lpq (bsd) to query the status of the okilan 6020...

  • Page 138: Appendix B

    Iv - 56 section 4 - appendix b - application considerations oki okilan 6020e user’s guide appendix b application considerations overview this appendix provides application notes for the following: • assigning the okilan 6020e ip address with bootp • assigning the okilan 6020e ip address with rarp • ...

  • Page 139: Tcp/ip

    Iv - 57 section 4 - appendix b - application considerations oki okilan 6020e user’s guide tcp/ip assigning the okilan 6020e ip address with bootp bootp is an acronym for bootstrap protocol. Every tcp/ip network device is required to have a unique 32-bit ip address assigned to it. Tcp/ip network devi...

  • Page 140

    Iv - 58 section 4 - appendix b - application considerations oki okilan 6020e user’s guide a name can be arbitrarily assigned to any device on a network. The following examples use the name okiprinter. Remember that this name is arbitrary; a customer can assign any name they wish. /etc/bootptab: the ...

  • Page 141: Tcp/ip

    Iv - 59 section 4 - appendix b - application considerations oki okilan 6020e user’s guide tcp/ip 4. The bootpd daemon transmits a response to the okilan 6020e with the ip address 192.168.42.55. The okilan 6020e will use this ip address for all subsequent transmissions. For these steps to work proper...

  • Page 142: Address With Rarp

    Iv - 60 section 4 - appendix b - application considerations oki okilan 6020e user’s guide configuring the okilan 6020e ip address with rarp rarp is an acronym for reverse address resolution protocol. Every tcp/ip network device must have a unique 32-bit ip address. Tcp/ip network devices will have b...

  • Page 143: Tcp/ip

    Iv - 61 section 4 - appendix b - application considerations oki okilan 6020e user’s guide tcp/ip configuration files the purpose of rarp is to look up a 32-bit ip address given a 48-bit network hardware address. The rarp server (which is usually a unix workstation running a rarpd daemon) performs th...

  • Page 144: Limitations

    Iv - 62 section 4 - appendix b - application considerations oki okilan 6020e user’s guide 4. The rarpd then consults the “/etc/hosts” file and looks up the name okiprinter. It finds an ip address (in this case 192.168.42.55) associated with the name okiprinter. 5. The rarpd daemon transmits a respon...

  • Page 145: Tcp/ip

    Iv - 63 section 4 - appendix b - application considerations oki okilan 6020e user’s guide tcp/ip configuring hp-ux v8.07 for printing with the okilan 6020e this application note describes the configuration of the printing system on the hp-ux ver. 8.07 of the unix operating system. For clarity and br...

  • Page 147: Tcp/ip

    Iv - 65 section 4 - appendix b - application considerations oki okilan 6020e user’s guide tcp/ip 3. Select the following options, in order, from the sam menu: peripheral devices -> printers and plotters -> actions -> add a remote printer (do not select add a network printer) a form appears asking yo...

  • Page 148: 7. Printer Name: — Lj4

    Iv - 66 section 4 - appendix b - application considerations oki okilan 6020e user’s guide 6. Enable the printer you just created using sam. Peripheral devices -> printers and plotters -> enable a printer ... 7. Printer name: — lj4 8. Start the lp request scheduler by typing: /usr/lib/lpsched 9. Run ...

  • Page 149: Tcp/ip

    Iv - 67 section 4 - appendix b - application considerations oki okilan 6020e user’s guide tcp/ip prerequisites before you proceed, the following prerequisites must be met. Most of the time steps 2 through 5 are already configured since the hp-ux system is on a tcp/ip network. Do not perform steps 2 ...

  • Page 150: Procedure

    Iv - 68 section 4 - appendix b - application considerations oki okilan 6020e user’s guide procedure hp-ux uses an interactive utility called sam (system administration manager) to configure printing. 1. Login to the hp-ux system as root. 2. Invoke the sam utility by typing sam at the unix prompt. (w...

  • Page 151: Tcp/ip

    Iv - 69 section 4 - appendix b - application considerations oki okilan 6020e user’s guide tcp/ip h) allow anyone to cancel requests. Check if desired. I) remote printer is on a bsd system. Check this box. Tells the hp-ux system that it is communicating with a berkeley style remote printer (such as l...

  • Page 152: Prerequisites

    Iv - 70 section 4 - appendix b - application considerations oki okilan 6020e user’s guide • yourqueuename - this is the name of the queue on the okilan 6020e and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs. If ff, lf or nf are the last two letters of the queu...

  • Page 153: Tcp/ip

    Iv - 71 section 4 - appendix b - application considerations oki okilan 6020e user’s guide tcp/ip 4. Make sure the following entry is in the “/etc/services” file: printer 515/tcp spooler 5. Start inetd by typing the following at the unix prompt: /etc/inetd -c procedure hp-ux uses an interactive utili...

  • Page 154: Lp -D Lj4 Filename

    Iv - 72 section 4 - appendix b - application considerations oki okilan 6020e user’s guide c) remote printer name - yourqueuename this is the name of the queue on the okilan 6020e and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs. D) remote cancel model - rcmode...

  • Page 155: Tcp/ip

    Iv - 73 section 4 - appendix b - application considerations oki okilan 6020e user’s guide tcp/ip configuring sco unix for printing with the okilan 6020e this application note describes the configuration of the printing system on the santa cruz operation’s (sco) version of the unix operating system. ...

  • Page 156: Procedure

    Iv - 74 section 4 - appendix b - application considerations oki okilan 6020e user’s guide procedure 1. Login to the sco machine as root. 2. Install remote line printing or verify that it is running by typing mkdev rlp at the unix prompt. It will respond by asking if you want to install or remove rem...

  • Page 157: Tcp/ip

    Iv - 75 section 4 - appendix b - application considerations oki okilan 6020e user’s guide tcp/ip ibm’s aix ver. 3.X for printing with the okilan 6020e this application note describes the configuration of the printing system on ibm’s aix version 3.X of the unix operating system. The following specifi...

  • Page 158: Okiprinter

    Iv - 76 section 4 - appendix b - application considerations oki okilan 6020e user’s guide 3. To add a remote queue, select the following options from the smit menu: spooler (print jobs and printers) manage remote printer subsystem client services remote printer queues add a remote queue a form appea...

  • Page 159: Tcp/ip

    Iv - 77 section 4 - appendix b - application considerations oki okilan 6020e user’s guide tcp/ip 6. Start the qdaemon by typing: aix> startsrc -s qdaemon 7. Try printing to the printer attached to the okilan 6020e by issuing the following command: aix> lpr -plj4 filename configuring solaris 2.X for ...

  • Page 160: Prerequisites

    Iv - 78 section 4 - appendix b - application considerations oki okilan 6020e user’s guide prerequisites before you proceed, the following prerequisites must be met: 1. The name okiprinter and the ip address assigned to the okilan 6020e are in the “/etc/hosts” file on the solaris system. 2. Make sure...

  • Page 161: Tcp/ip

    Iv - 79 section 4 - appendix b - application considerations oki okilan 6020e user’s guide tcp/ip configuring sun-os v4.1.X or ultrix v4.2 for printing with the okilan 6020e this application note describes the configuration of the printing system on the sun-os ver 4.1.X and ultrix ver. 4.2 of the uni...

  • Page 162: /usr/lib/lpd

    Iv - 80 section 4 - appendix b - application considerations oki okilan 6020e user’s guide if the lpd daemon is running, you should see output similar to: root 135 0.0 0.0 52 0 ? Iw may 24 0:01 /usr/lib/lpd if the lpd daemon is not running, start the daemon by logging into the sun-os or ultrix machin...

  • Page 163: Tcp/ip

    Iv - 81 section 4 - appendix c - internet printing protocol (ipp) oki okilan 6020e user’s guide tcp/ip appendix c internet printing protocol (ipp) internet printing protocol (ipp) is an application level protocol that can be used for distributed printing over the internet. Using the new ipp protocol...

  • Page 164

    Iv - 82 section 4 - appendix c - internet printing protocol (ipp) oki okilan 6020e user’s guide.

  • Page 165: Lan Manager/ Server

    Lan manager/ server section v: lan manager/lan server.

  • Page 166: In This Section

    V - 2 section 5 - lan manager/lan server oki okilan 6020e user’s guide in this section chapter 1 introduction ........................................... V-3 overview ....................................................... V-3 system requirements .................................... V-3 chapter 2 in...

  • Page 167: Lan Manager/ Server

    V - 3 section 5 - chapter 1 - introduction oki okilan 6020e user’s guide lan manager/ server chapter 1 introduction overview this section contains information about the okinet for os/2 utility. This utility allows you to install and configure the okilan 6020e for your specific environment. The utili...

  • Page 168: Dlc/802.2 Protocol Stack

    V - 4 section 5 - chapter 1 - introduction oki okilan 6020e user’s guide dlc/802.2 protocol stack the dlc/802.2 protocol stack must be loaded and running on the file server from which the oki network printer redirector will run. With lan manager, this means you must enable the remote boot facility. ...

  • Page 169: Lan Manager/ Server

    V - 5 section 5 - chapter 2 - installation oki okilan 6020e user’s guide lan manager/ server chapter 2 installation overview to install the okilan 6020e: 1. Install the okinet for os/2 utilities software. 2. Run the okinet for os/2 utility to add a local printer port. 3. Associate a print queue with...

  • Page 170: Install

    V - 6 section 5 - chapter 2 - installation oki okilan 6020e user’s guide • the initial installation requires the file server to be brought down and then back up again. This may be a consideration when you are planning your install. Depending on your current configuration, the following software may ...

  • Page 171: Lan Manager/ Server

    V - 7 section 5 - chapter 2 - installation oki okilan 6020e user’s guide lan manager/ server running install 1. Login to the server with administrator privileges. If you are reinstalling the utility, disable the spooler before running install. If this is the first time you have installed the utility...

  • Page 172: Port.

    V - 8 section 5 - chapter 2 - installation oki okilan 6020e user’s guide 3. Select ok. The esi print server status screen will display. From the configure menu, select add local port. 4. Select a print server and port. Print servers are identified by serial number. (you will find the serial number f...

  • Page 173: Lan Manager/ Server

    V - 9 section 5 - chapter 2 - installation oki okilan 6020e user’s guide lan manager/ server creating an os/2 printer to print to the local port created by okinet for os/2, you must create an os/2 printer. Os/2 1.3 1. Open the print manager from the desktop. 2. Select setup from the menu. 3. Select ...

  • Page 174

    V - 10 section 5 - chapter 2 - installation oki okilan 6020e user’s guide printing a configuration sheet you can verify communication by printing a configuration sheet using okinet for os/2. 1. Select configure from the main print server window. 2. Select configure print server. 3. Select the okilan...

  • Page 175: Lan Manager/ Server

    V - 11 section 5 - chapter 3 - printing in the os2 environment oki okilan 6020e user’s guide lan manager/ server chapter 3 printing in the os/2 environment overview os/2 provides several methods for selecting a printer from within an application. The best method to use depends on the specific applic...

  • Page 176: Dos and Win-Os/2

    V - 12 section 5 - chapter 3 - printing in the os2 environment oki okilan 6020e user’s guide 3. Select the print queue associated with the okilan 6020e. Os/2 applications that use the default printer will now print to the printer attached to the okilan 6020e. The os/2 print screen function uses the ...

  • Page 177: Lan Manager/ Server

    V - 13 section 5 - chapter 4 - additional utility features oki okilan 6020e user’s guide lan manager/ server chapter 4 additional utility features overview you can run the okinet for os/2 utility at any time to access the following optional features: • deleting a local port • configuring a print ser...

  • Page 178: Configuring Parallel Port P1

    V - 14 section 5 - chapter 4 - additional utility features oki okilan 6020e user’s guide 3. From the configure menu, select configure print server. The following screen will display: the okilan 6020e will reset by selecting ok to save any of the options, except the print configuration sheet option. ...

  • Page 179: Lan Manager/ Server

    V - 15 section 5 - chapter 4 - additional utility features oki okilan 6020e user’s guide lan manager/ server restoring factory defaults the restore defaults option restores the factory default settings for the lan manager/lan server protocol and output ports. To restore factory defaults, select an o...

  • Page 180: Chapter 5

    V - 16 section 5 - chapter 5 - using help oki okilan 6020e user’s guide chapter 5 using help overview the okinet for os/2 utility provides both general and context-specific help. General help to access help information about installation and configuration, select help from the main menu, then select...

  • Page 181: Lan Manager/ Server

    V - 17 section 5 - appendix a - troubleshooting oki okilan 6020e user’s guide lan manager/ server appendix a troubleshooting no configuration sheet if the led turns solid orange due to a network protocol error and no configuration sheet is printed, your printer may be configured for postscript opera...

  • Page 183: Ethert

    Ethert alk section vi: ethertalk support for apple® macintosh®.

  • Page 184: In This Section

    Vi - 2 section 6 - ethertalk oki okilan 6020e user’s guide in this section chapter 1 introduction .......................................... Vi-3 overview ...................................................... Vi-3 system requirements ................................... Vi-3 before you start ..........

  • Page 185: Ethert

    Vi - 3 section 6 - chapter 1 - introduction oki okilan 6020e user’s guide ethert alk chapter 1 introduction overview this section describes the steps necessary to configure the ethertalk protocol. The following topics are covered in this section: • setting the printer name • selecting a zone • selec...

  • Page 186: Chapter 2

    Vi - 4 section 6 - chapter 2 - the okilan 6020e utility oki okilan 6020e user’s guide chapter 2 the okilan 6020e utility overview the okilan 6020e utility allows the user to: • change the okilan 6020e product’s appletalk name • move the okilan 6020e from the default zone to a preferred zone • print ...

  • Page 187: Ethert

    Vi - 5 section 6 - chapter 2 - the okilan 6020e utility oki okilan 6020e user’s guide ethert alk renaming the okilan 6020e printer the okilan 6020e printer selection window contains a list of all okilan 6020e printers found in the selected zones. Okilan 6020e printers are listed alphabetically by na...

  • Page 188: Print Configuration

    Vi - 6 section 6 - chapter 2 - the okilan 6020e utility oki okilan 6020e user’s guide print configuration the print configuration option is accessed by selecting print config from the file pull-down menu. Choose this option to print an okilan 6020e configuration sheet. A configuration sheet will pri...

  • Page 189: Ethert

    Vi - 7 section 6 - chapter 2 - the okilan 6020e utility oki okilan 6020e user’s guide ethert alk enable port this option allows you to enable or disable a port. If a port is disabled, it will appear in the okilan 6020e utility but will not appear in the chooser. A disabled port cannot be configured....

  • Page 190: Appendix A

    Vi - 8 section 6 - appendix a - troubleshooting oki okilan 6020e user’s guide appendix a troubleshooting before you call this appendix allows you to troubleshoot problems you may have installing or using the ethertalk protocol. After trying these suggestions, if you are still having difficulty, call...

  • Page 191: Ethert

    Vi - 9 section 6 - appendix a - troubleshooting oki okilan 6020e user’s guide ethert alk unable to print from a macintosh if you are unable to print from a macintosh via the okilan 6020e, try the following: • verify the okilan 6020e appears in the chooser as a laserwriter device. If the okilan 6020e...

  • Page 192: Network Error Messages

    Vi - 10 section 6 - appendix a - troubleshooting oki okilan 6020e user’s guide if the directory does not print, send the directory again, and watch the okilan 6020e activity indicator. If the status indicator flashes to indicate activity, data is reaching the okilan 6020e. Send the document again an...

  • Page 193: Ethert

    Vi - 11 section 6 - appendix a - troubleshooting oki okilan 6020e user’s guide ethert alk • compare the zone in which the okilan 6020e appears in the chooser to the zones searched. Search the same zone where the okilan 6020e appears in the chooser. Okilan 6020e utility errors message: appletalk netw...

  • Page 194

    Vi - 12 section 6 - appendix a - troubleshooting oki okilan 6020e user’s guide message: no okilan 6020e device(s) found. Verify the okilan 6020e is powered on. Recommended action: confirm the device is powered on and the led is green. Verify correct zone to search by printing a configuration sheet. ...

  • Page 195: Ethert

    Vi - 13 section 6 - appendix b - selecting your printer oki okilan 6020e user’s guide ethert alk appendix b selecting your printer to select your printer 1. Click on the apple in the menu bar and select chooser. 2. Click on the print driver icon. If a caution box appears, click ok. If the print driv...

  • Page 196: Appendix C

    Vi - 14 section 6 - appendix c - capturing with a spooler oki okilan 6020e user’s guide 2. Click on the printer name you want to use. Note: if your printer is the only name listed in the box, it still must be selected. Your printer will remain selected until you choose a different printer with your ...

  • Page 197: Ethert

    Vi - 15 section 6 - appendix c - capturing with a spooler oki okilan 6020e user’s guide ethert alk releasing 1. Use the okilan 6020e utility to: a) change type 1 to laserwriter b) change type 2 to lasershared 2. Release the okilan 6020e from the print spooler application. 3. Use the okilan 6020e uti...

  • Page 198

    Vi - 16 section 6 - appendix c - capturing with a spooler oki okilan 6020e user’s guide.

  • Page 199: Windows Printing

    Windows printing section vii: windows printing.

  • Page 200: In This Section

    Vii - 2 section 7 - windows printing oki okilan 6020e user’s guide in this section chapter 1 okilan 6020e set up for windows nt 4.0/2000 ........................................... Vii-3 overview .................................................... Vii-3 okilan 6020e connect for ip ....................

  • Page 201: Windows Printing

    Vii - 3 section 7 - chapter 1 - okilan 6020e setup for windows nt oki okilan 6020e user’s guide windows printing chapter 1 okilan 6020e set up for windows nt 4.0/2000 overview this section contains instruction and information on how to set up your okilan 6020e for a windows nt 4.0/2000 environment. ...

  • Page 202: Installation

    Vii - 4 section 7 - chapter 1 - okilan 6020e setup for windows nt oki okilan 6020e user’s guide installation to install okilan 6020e connect for tcp/ip, follow the instructions below: 1. Install the okilan 6020e connect for tcp/ip files - see section i. 2. When installation is complete, click on sta...

  • Page 203: Windows Printing

    Vii - 5 section 7 - chapter 1 - okilan 6020e setup for windows nt oki okilan 6020e user’s guide windows printing 5. From the list of available printer ports, select oki okilan 6020e connect ip monitor as the type of port to add and click new port. You will enter into the add okilan 6020e connect por...

  • Page 204: Notify When Printed

    Vii - 6 section 7 - chapter 1 - okilan 6020e setup for windows nt oki okilan 6020e user’s guide notify when printed this feature will provide an alert when your job is active on the printer. This may be useful if the printer is especially busy. Description an optional field where you may list the lo...

  • Page 205: Windows Printing

    Vii - 7 section 7 - chapter 1 - okilan 6020e setup for windows nt oki okilan 6020e user’s guide windows printing notify when printed this feature will provide an alert when your job is active on the printer. This may be useful if the printer is especially busy. Description an optional field where yo...

  • Page 206: Install Lpr Print Monitor

    Vii - 8 section 7 - chapter 1 - okilan 6020e setup for windows nt oki okilan 6020e user’s guide install lpr print monitor 1. Open the windows nt control panel. 2. Select the services tab. 3. Select add, then microsoft tcp/ip printing. 4. Click the close button. 5. Restart the system. Assign print se...

  • Page 207: Windows Printing

    Vii - 9 section 7 - chapter 1 - okilan 6020e setup for windows nt oki okilan 6020e user’s guide windows printing 5. In the name or address of server providing lpd: field, enter the ip address you assigned to the printer. 6. In the name of printer or print queue on that server: field, enter the print...

  • Page 208: Chapter 2

    Vii - 10 section 7 - chapter 2 - okilan 6020e setup for windows 95/98 oki okilan 6020e user’s guide chapter 2 okilan 6020e set up for windows 95/98 overview this section contains instruction and information on how to set up your okilan 6020e for a windows 95/ 98 environment. Print options for window...

  • Page 209: Windows Printing

    Vii - 11 section 7 - chapter 2 - okilan 6020e setup for windows 95/98 oki okilan 6020e user’s guide windows printing 3. Select the windows printer from which you would like to print with okilan 6020e connect, then select properties from the file menu. 4. Add an okilan 6020e connect port. This may be...

  • Page 210: 8. Click Ok.

    Vii - 12 section 7 - chapter 2 - okilan 6020e setup for windows 95/98 oki okilan 6020e user’s guide 8. Click ok. You will now be able to use okilan 6020e connect for tcp/ip. Whenever you print to the printer configured with okilan 6020e connect, your print job will go directly to the okilan 6020e pr...

  • Page 211: Windows Printing

    Vii - 13 section 7 - chapter 2 - okilan 6020e setup for windows 95/98 oki okilan 6020e user’s guide windows printing 4. Add an okilan 6020e connect port. This may be done by selecting add port under the details tab. 5. In the add port window, select the radio button labeled other and select oki okil...

  • Page 212: Port Number

    Vii - 14 section 7 - chapter 2 - okilan 6020e setup for windows 95/98 oki okilan 6020e user’s guide output port configuration options to configure the okilan 6020e output port, select the output port tab. Port number select the port number you wish to configure. Configuration page language select th...

  • Page 213: Section Viii:

    Okiview 32 section viii: okiview 32.

  • Page 214: In This Section

    Viii - 2 section 8 - okiview 32 oki okilan 6020e user’s guide in this section chapter 1 introduction ............................................ Viii-3 okiview 32 installation requirements ...... Viii-3 chapter 2 okiview 32 printer panel .................... Viii-4 okiview 32 printer properties men...

  • Page 215: Chapter 1

    Viii - 3 section 8 - okiview 32 oki okilan 6020e user’s guide okiview 32 chapter 1 introduction the okiview 32 utility provides a simple, quick way of viewing the status of all brands of network printers on microsoft/novell networks, as well as configuring and maintaining oki network printers on tho...

  • Page 216: Chapter 2

    Viii - 4 section 8 - okiview 32 oki okilan 6020e user’s guide chapter 2 okiview 32 printer panel the printer panel is the okiview 32 main display. The display is divided into two smaller panels: the printer filters panel and the printer information panel. The printer information panel, on the right ...

  • Page 217: Status

    Viii - 5 section 8 - okiview 32 oki okilan 6020e user’s guide okiview 32 status the status screen is reached from the printer properties menu. This screen displays descriptive information about the printer, as well as its online/offline status and the status text displayed on the printer’s front pan...

  • Page 218: 4 Click Ok.

    Viii - 6 section 8 - okiview 32 oki okilan 6020e user’s guide changing the printer’s name and location 1 select a printer on the printer information panel. 2 from the printer menu, click printer properties. 3 change the text in the name and/or location fields. 4 click ok. Okiview 32 discovery prefer...

  • Page 219: Regulatory Information

    Regulatory information section ix: regulatory information.

  • Page 220: Federal Communications

    Ix - 2 section 9 - regulatory information oki okilan 6020e user’s guide federal communications commission radio frequency interference statement this equipment generates and uses radio frequency energy. If not installed and used according to the manufacturer’s instructions, this equipment may cause ...

  • Page 221: Index

    Index index a advanced configuration options okilan 6020e utility (ethertalk), vii-6 advanced management features network alert, ii-18 okinet for tcp/ip, ii-19 printer security for tcp/ip printing, ii-19 security, ii-5 advanced management features okinet for nds, ii-19 assigning an ip address bootp,...

  • Page 222

    Index - 2 index oki okilan 6020e user’s guide diagnostic information displaying in netware, iii-17 dlc/802.2 protocol stack, vi-4 e enabling/disabling protocols okinet for netware, iii-17 okinet for tcp/ip, iv-32 error messages ethertalk, vii-11 to vii-12 tcp/ip hardware, iv-53 ethertalk okilan 6020...

  • Page 223: Index

    Index - 3 index oki okilan 6020e user’s guide index install, lan manager/lan server installation, vi-7 running the utility, vi-7 ip address assigning bootp, iv-11 to iv-12 dhcp, iv-10 gleaning, iv-9 rarp, iv-11 to iv-12 static route entry, iv-11 choosing, iv-7 j jetadmin support, ii-6 to ii-7 applet...

  • Page 224

    Index - 4 index oki okilan 6020e user’s guide port configuration options, iii-10 resetting the okilan 6020e, iii-17 restoring factory default settings, iii-18 running the utility, iii-7 searching for a specific okilan 6020e, iii-19 snmp access information, iii-22 to iii-23 view settings, modifying, ...

  • Page 225: Index

    Index - 5 index oki okilan 6020e user’s guide index s sco unix application prerequisites, iv-73 procedure, iv-74 security in snmp, ii-5 selecting a zone in ethertalk, vii-5 selecting your printer in ethertalk, vii-13 to vii-14 set community name in tcp/ip, iv-31 snmp configuration options, okinet fo...

  • Page 226

    Index - 6 index oki okilan 6020e user’s guide restoring to factory defaults, iv-49 static route entry, iv-52 unable to assign ip address, iv-50 to iv-53 unable to print, iv-54 to iv-55 unix bootp, iv-51 winsock errors, iv-53 u ultrix v4.2 application prerequisites, iv-79 to iv-80 procedure, iv-80 un...