Oki 70037401, 70037501 & 70037601 memory dimm installation instructions.
Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki data assumes no responsibility for the results of errors beyond its control. Oki data also cannot guarantee that changes in software and equipment made by other manufacturers and ref...
3 getting started the printers have four sockets for memory dimm boards. You can expand the printer's memory up to 1 gb by installing four 256-mb dimms. To achieve the 1 gb memory in most models, you will need to replace the dimm(s) provided with 256 mb dimms: model memory provided c7200 64 mb c7200...
4 prepare the printer 1 turn the printer off and unplug the power cord. 2 detach the interface cable from the printer. 3 remove and save the thumbscrew at the top and bottom which hold the control board in place. C7000 series c9000 series.
5 4 grasp the control board, loosen it by wiggling it back and forth, and slide it out of the printer. C7000 series c9000 series.
6 1 locate the dimm sockets ( 1) on the control board. ! Dimms must be installed in the socket number sequence 1-3-2-4. Socket numbers ( 1) are located at the end of the sockets nearest the front of the board. Install the dimm(s).
7 2 push out the white lock tabs at either end of the dimm socket. Caution! Circuit boards can be damaged by static electricity and rough handling. To avoid damage, ground yourself before handling dimms. 3 remove the dimm from its shipping package. 4 align the dimm with the narrow strip ( 1) on its ...
8 complete the installation 1 align the bottom of the control board with the track in the printer and slide it back into place. C7000 series c9000 series.
9 2 reinstall the thumbscrews at the top and bottom of the board. C7000 series c9000 series 3 reattach the computer interface cable. 4 plug the power cord into the power outlet and turn the printer on..
10 check for proper installation generate a menumap printout and check to be sure that the dimms are properly installed: 1 press menu once or twice until information menu appears on the display. 2 press select. Print menu map appears on the display. 3 press select. The menumap prints. 4 check the to...
11 change the memory setting in the driver(s) windows ® adobe ® postscript ® driver 1 click start ® settings ® printers. The printers dialog box opens. 2 right click the appropriate oki (c7200, c7400, c9200 or c9400) postscript driver icon, then click properties. 3 windows 2000 & nt 4.0: a click the...
12 macintosh ® driver 1 activate chooser from the apple menu. 2 select laserwriter 8. 3 click printer ® setup. 4 click configure. 5 change the memory configuration setting to match the total dimm memory installed (original plus the new memory you just installed): 6 click ok twice, then close chooser...
13 limited warranty: united states & canada oki data americas, inc. (oki data) warrants this option to be free from defect in material and workmanship and will remedy any such defect according to the terms of this limited warranty. Oki data will repair (or at its option, replace) at no charge, any d...
14 implied warranties of merchantability or fitness for a particular purpose, shall extend beyond the respective warranty period described above of one (1) year. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Oki data shall n...
15 oki data service depot information united states canada oki data americas, inc. Oki data americas, inc. 2020 bishops gate blvd. 2735 matheson blvd. East, unit 1 mt. Laurel, nj 08054 mississauga, ontario canada l4w 4mb tel: 1-800-654-3282 tel: 800-654-3282 fax: 1-856-222-5247 fax: 905-238-4427 mex...
Oki data americas, inc. 2000 bishops gate blvd. Mt. Laurel, nj 08054-4620 tel: (800) 654-3282 fax: (856) 222-5320 http://www.Okidata.Com 58346602.