Oki C7200 Fuser Unit Replacing

Replacing the Fuser Unit

Caution! The fuser unit may be HOT. Be sure to let it cool

down before attempting to replace it.

1 Turn the printer off.

2 Pull up on the handle and lift the cover.

3 Push the blue lock levers at either end of the fuser unit

toward the back of the printer to release the fuser.

4 Grab the handle and lift the fuser out.

5 Unpack the replacement fuser and lower it into the

printer, pushing down until you feel it snap into place.

!

Make sure the blue lock levers at either end of the fuser

have snapped back locking the fuser unit in place. If

not, pull them toward the front of the printer.

6 Pull the fuser roller lock lever toward the front of the

printer, then remove the orange fuser transport lock.

7 Push the fuser roller release lever toward the back of the

printer as far as it will go.

8 Close the printer cover and turn the printer back on.

120V, OKI P/N 41304001

230V, OKI P/N 41304007

Fuser

Unit

(at back

of

printer)