1. DL manuals
  2. Oki
  3. Printer
  4. MPS930b
  5. User Manual

Oki MPS930b User Manual

Other manuals for MPS930b: Handy Reference, Material Safety Data Sheet
Manual is about: MPS930b User's Gude

Summary of MPS930b

  • Page 1

    User’s guide 59319501 my.Okidata.Com mps930b b930

  • Page 2

    Mps930b user’s guide> 2 copyright information______________________________________ copyright © 2009 by oki data americas, inc. All rights reserved. Document information _____________________________________ b930 user guide p/n 59319501, revision 1.0 august 2009 disclaimer __________________________...

  • Page 3

    Mps930b user’s guide> 3 data loss in hard disk/compact flash disk saved data may be lost if the hard disk/compact flash in the machine breaks down due to external shocks or if the power is accidentally cut off in a manner not following the methods listed in manuals or other documentation. Oki is not...

  • Page 4

    Mps930b user’s guide> 4 p reface thank you for choosing this printer. This is a guide on operating this printer and the important points to note. To understand the features fully and to use the printer correctly and effectively, please read this guide before using it. Keep this guide handy for a qui...

  • Page 5

    Mps930b user’s guide> 5 c onventions 1. In this guide, “computer” refers to both the personal computer and workstation. 2. The following headers are used in this guide: important indicates important information which you should read. Note indicates additional information on operations or features. R...

  • Page 6

    Mps930b user’s guide> 6 i llegal c opies and p rintouts copying or printing certain documents may be illegal in your country. Penalties of fines or imprisonment may be imposed on those found guilty. The following are examples of items that may be illegal to copy or print in your country. • currency ...

  • Page 7

    Mps930b user’s guide> 7 t able o f c ontents basic printing tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 printing a configuration summary . . . . . . . . . . . . . . . . .11 loading paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 loading trays 1-4 . . . . . . ...

  • Page 8

    B930 user’s guide> 8 getting to know your printer . . . . . . . . . . . . . . . . . . . . 41 front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 internal components . . . . . . . . . . . . . ...

  • Page 9

    Mps930b user’s guide> 9 networking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 supported environment. . . . . . . . . . . . . . . . . . . . . . . . .75 supported os and environment . . . . . . . . . . . . . . . .75 configuration . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 10

    B930 user’s guide> 10 error and warning messages . . . . . . . . . . . . . . . . . . . . 128 maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 cleaning the printer . . . . . . . . . . . . . . . . . . . . . . . . . . 136 cleaning the exterior. . . . . . . . . . . . . . ....

  • Page 11

    Mps930b user’s guide> 11 b asic p rinting t asks p rinting a c onfiguration s ummary your printer can print a configuration summary that lists the currently selected status of menu options, media selections in trays, options installed and other relevant information about your printer. To print a con...

  • Page 12

    Mps930b user’s guide> 12 2. Fan the paper to release sheets that may stick together. 3. Add paper to the tray without exceeding the maximum level. Note > do not load paper exceeding the maximum fill line or the maximum capacity allowed. Align the right width guide with the paper width correctly. If ...

  • Page 13

    Mps930b user’s guide> 13 4. Insert the paper into the tray. If necessary, adjust the paper guides to the size of the paper. 5. Slide the paper tray back into the machine. 6. If custom sizes of paper are used, make the appropriate changes in your printer properties and at the operator panel as needed...

  • Page 14

    Mps930b user’s guide> 14 l oading mpf (t ray 5) the mpf can be used for both manual and automatic feeds. There is an indicator label on the tray that shows the positioning of each side of paper. This label addresses long-edge and short-edge orientation. For custom size paper loaded in the mpf, you m...

  • Page 15

    Mps930b user’s guide> 15 3. Fan the paper to release sheets that may stick together. 4. Insert the paper into the tray. If necessary, adjust the paper guides to the size of the paper. 5. If custom sizes of paper are used, make the appropriate changes in your printer properties and at the operator pa...

  • Page 16

    Mps930b user’s guide> 16 2. If loading paper with a different width or length, adjust the width and length guides. 3. Fan the paper to release sheets that may stick together..

  • Page 17

    Mps930b user’s guide> 17 4. Insert the paper into the tray. 5. Push the tray completely into the printer. P rinting a t est p age you can print a demo (test) page to verify printer connectivity and operation. The most convenient way to enable this feature is by using your printer properties. You may...

  • Page 18

    Mps930b user’s guide> 18 b asic p rinting when you send a job to the printer, you should select the paper size, number of copies, orientation, and decide if you want the copies collated. This can often be done from windows specific to your application. The instructions in this section refer to setti...

  • Page 19

    Mps930b user’s guide> 19 the most convenient way to enable this feature is by using your printer properties. You may also enable this feature at the operator panel or by using the ews. To select collating through your printer properties: 4. Select collate in the job options tab within your printer p...

  • Page 20

    Mps930b user’s guide> 20 p rinting in r everse o rder by default the printer prints jobs from back to front placing the first page of the document on the top of the stack. You may opt to print in the reverse order, placing the last page of the document on the top of the stack. The most convenient wa...

  • Page 21

    Mps930b user’s guide> 21 b inding p references you can select how the printer will orient the page layout when duplexing. Depending on your page orientation, duplexing on the long-edge or short-edge of the paper produces different results. The diagram below illustrates these results. P rinting on s ...

  • Page 22

    Mps930b user’s guide> 22 • remove all other media before loading transparencies into the tray. • do not load transparencies above the fill line; this may cause the printer to jam • handle transparencies by the edges to avoid fingerprints and creases that can cause poor print quality. • do not use tr...

  • Page 23

    Mps930b user’s guide> 23 5. Select transparency as the media type from the media type pulldown. 6. Click ok. E nvelopes envelopes can be printed using tray 5. Read the following guidelines before printing envelopes. • use envelopes specifically made for laser printers. • make sure that envelopes are...

  • Page 24

    Mps930b user’s guide> 24 • place the envelope with the flap entering the printer first. 2. Adjust the paper guides to the size of the envelopes. 3. Change media type at operator panel via the paper menu’s media type selection. 4. Select envelope as the media type in the media type pulldown. 5. Click...

  • Page 25

    Mps930b user’s guide> 25 • insert small postcards short-edge feed and facedown. Place the top of the postcard toward the rear of the printer. 2. Adjust the paper guides to the size of the postcards. 3. Change media type at operator panel via the paper menu’s media type selection. 4. Select postcard ...

  • Page 26

    Mps930b user’s guide> 26 • trays 1-4 - insert the label sheets long-edge feed and faceup. Place the top of the page toward the front of the printer. • tray 6- insert the label sheets long-edge feed and facedown. Place the top of the page toward the front of the printer. 2. Adjust the paper guides to...

  • Page 27

    Mps930b user’s guide> 27 c ustom s ize p aper you can print custom size from trays 1 through 5. Tray 6 only prints standard paper. The following paper size ranges can be printed from each tray: note > when loading custom size paper in the trays load by the correct edge (long or short) and to adjust ...

  • Page 28

    Mps930b user’s guide> 28 7. Click ok. 8. Click ok. 9. Click ok. T ray s ettings you can configure a variety of settings for your input trays and output bins. The default settings for your source input tray and output bin are configured through the operator panel’s paper menu, default source and outp...

  • Page 29

    Mps930b user’s guide> 29 i nput t ray l inking when an input tray runs out of paper, auto tray changing enables the printer to switch to another available tray that contains the same size and paper type. You can select auto tray changing via the operator panel, printer properties, or web interface. ...

  • Page 30

    Mps930b user’s guide> 30 2. Select manual feed. 3. Click ok. M edia c heck by default the printer selects the input source based on the paper size requested. If the paper size requested is not loaded in any input tray, the printer feeds from the default input tray. Media type is not a factor in the ...

  • Page 31

    Mps930b user’s guide> 31 the most convenient way to enable this feature is by using your printer properties. You may also enable this feature at the operator panel or by using the ews. To turn job offset on through your printer properties: 1. Select the paper feed button in the setup tab within your...

  • Page 32

    Mps930b user’s guide> 32 u sing the h ole p uncher the optional finisher contains the hole puncher. When installed, a 3-hole or 2/4-hole puncher is available. European finishers have the 2/4 hole punch while american finishers have a 3 hole punch. When hole punching is installed, it must be enabled ...

  • Page 33

    Mps930b user’s guide> 33 3. Place the punch waste box back into the finisher. 4. Close door g. U sing the s tapler several stapling options are available. You can staple at different locations on the paper depending on whether one staple or two staples is used. The following table displays the locat...

  • Page 34

    Mps930b user’s guide> 34 bottom-left portrait landscape dual portrait landscape stapling selection orientation staple placement a a a a.

  • Page 35

    Mps930b user’s guide> 35 the most convenient way to enable this feature is by using your printer properties. You may also enable this feature at the operator panel or by using the ews. To turn stapling on through your printer properties: 1. Select the paper feed button in the setup tab within your p...

  • Page 36

    Mps930b user’s guide> 36 3. Remove the staple unit by lifting it up and out. 4. If present, remove the depleted staple cartridge. 5. Insert a new staple cartridge. 6. Insert the staple unit into the finisher. 7. Close door g..

  • Page 37

    Mps930b user’s guide> 37 c ancelling /c hecking p rinting c ancelling p rinting to cancel printing, you can either cancel the print job at the printer or at the computer. Cancelling a print job at the printer press the cancel button then press the on-line button on the operator panel. However, pages...

  • Page 38

    Mps930b user’s guide> 38 a bout t his m anual thank you for selecting the b930n 50 ppm laser printer. This manual contains all of the information necessary to operate and care for your printer and accessories. It is intended to be used with the pictorial unpacking instructions and the quick setup gu...

  • Page 39

    Mps930b user’s guide> 39 the basic printer consists of the print engine main unit, consumables, 100 sheet multi purpose feeder (mpf) as well as trays 1 and 2 (500 sheet capacity each). C onventions this following conventions are used throughout this manual to emphasize certain procedures or informat...

  • Page 40

    Mps930b user’s guide> 40 s afety n otes for your own safety, please read this page carefully before using the machine. • do not place the machine in a hot, humid, dusty, or poorly ventilated environment. Prolonged exposure to these adverse conditions can cause fire or electric shock. • do not place ...

  • Page 41

    Mps930b user’s guide> 41 g etting to k now y our p rinter f ront view no. Name 1 front door 2 two 500-sheet feeders (trays 1 and 2) 3 optional duplex unit 4 multi purpose feeder tray 5 5 standard top bin output tray and transport to finisher 6 optional 2000-sheet feeder (tray 6) 7 optional 2x 500-sh...

  • Page 42

    Mps930b user’s guide> 42 r ear v iew 9 stacker main bin (3000 sheets) 10 stacker upper bin (500 sheets) 11 exit 2 is used in conjunction with duplex unit and finisher, comes with the duplex unit. No. Name 1 parallel port, ieee 1284 2 ethernet 10/100 baset connection 3 usb 2.0 connection 4 serial rs2...

  • Page 43

    Mps930b user’s guide> 43 data i/o connector settings can be configured via the operator panel’s interface menu. There are settings for ports, parallel setup, usb setup, and serial setup see “operator panel” on page 200 for a detailed description of each setting. I nternal c omponents 7 finisher powe...

  • Page 44

    Mps930b user’s guide> 44 t urning the p rinter o n and o ff switch on the power before operating the printer. When you have finished using the printer for the day or you do not intend to use it for a long period of time, switch off the power. T urning the p rinter o n 1. Press the power switch to th...

  • Page 45

    Mps930b user’s guide> 45 a vailable p rinter d rivers drivers are available for the following microsoft operating systems: vista 32/64, xp 32/64, server 2003 32/64, windows 2000, nt 4, windows 98, windows me, and windows 95. Drivers for the following pdls are available for each of the above operatin...

  • Page 46

    Mps930b user’s guide> 46 change global printer settings. All features of the printer are accessible through the operator panel. These changes affect all documents printed unless instructions are provided through your applications printer settings. Note > if there is a conflict between settings in th...

  • Page 47

    Mps930b user’s guide> 47 led i ndicators the led indicators also indicate printer status. The three indicators can each be on, off, or blinking, indicating different phases of printer operation. The table below explains two of the led indicators. P ush buttons the operator panel push buttons allow y...

  • Page 48

    Mps930b user’s guide> 48 to navigate the menus, use a combination of the menu, select, next and previous buttons to scroll your way through the menu map structure. E mbedded w eb s erver this printer comes with an embedded web server (ews). The ews resides on the hardware and no installation is requ...

  • Page 49

    Mps930b user’s guide> 49 in your web browser, type the ip address assigned to the printer. For example http://192.0.0.1 note > if there is a conflict between settings in the operator panel, printing preferences, or embedded web server and printer settings set via your application, the application se...

  • Page 50

    Mps930b user’s guide> 50 all jobs access printing properties via your printers and faxes menu. To make changes that apply to documents printed from a specific application, access printer properties from the application. Using your printer properties is a convenient way to make the most common printe...

  • Page 51

    Mps930b user’s guide> 51 the printer properties window appears. To access printer properties from printers and faxes (windows): 1. Select the printers and faxes from your start menu. 2. Right-click the desired b930 printer and select properties..

  • Page 52

    Mps930b user’s guide> 52 the printer’s configuration window appears. 3. On the general tab, click printing preferences.

  • Page 53

    Mps930b user’s guide> 53 the printer properties window appears. P aper u sage this printer can print on paper that is commonly sold. Select paper suitable for use by referring to the table below. However, we recommend the use of the standard paper for clearer printing. Note > gsm indicates the weigh...

  • Page 54

    Mps930b user’s guide> 54 s tandard p aper the standard paper that can be used for this printer is as follows. Manufacturer paper size weight xerox business multipurpose 4200 letter 20 lb/75 gsm. Xerox business multipurpose 4200 legal 20 lb. Xerox business multipurpose 4200 tabloid 20 lb./75 gsm hamm...

  • Page 55

    Mps930b user’s guide> 55 s pecial m edia t ypes the printer can also print on the following media types. These types of media are called special media. The printer can also print on special media types such as transparencies, envelopes, labels, and postcards. These types of media are called special ...

  • Page 56

    Mps930b user’s guide> 56 heavy media letter 32 lb. / 120 gsm xerox digital color xpressions+ heavy media letter 32 lb/120g hammermill laser print heavy media letter 90 lb. / 163 gsm xerox 90 lb. - index heavy media letter 110 lb. / 179gsm xerox 110 lb. Index heavy media letter 215 gsm wausau bright ...

  • Page 57

    Mps930b user’s guide> 57 p aper t ray capacity paper that can be loaded in the paper trays is as follows: a vailable p aper s izes all trays but mpf have paper size sensors to detect sizes. Heavy media a4 120gsm xerox colotech+ (ip & neusideler) label a4 xerox copier/laser 24-up paper label paper ty...

  • Page 58

    Mps930b user’s guide> 58 b5 (182x257mm) o - o o - o b4 (257x364) o - o o - o legal 13 (8.5”×13”) o - o o - o legal 14 (8.5”×14”) o - o o - o a3 (297x420mm) o - o o - o tabloid (11” ×17”) o - o o - o b5 (257x182mm) or executive (7.2" x 10.5") o o o o o o a5 (148x210mm) o - o o - o statement (5.5"x 8....

  • Page 59

    Mps930b user’s guide> 59 u nusable p aper using the following types of paper might cause paper jams, malfunctions or damage to the printer. Do not use them. • full-color transparencies • paper that is too thick or thin • paper that has been printed on before (including color printing) • wrinkled, fo...

  • Page 60

    Mps930b user’s guide> 60 • curled paper • paper with static electricity • adhesive paper • postcards with pictures • paper with special coating on its surface • treated colored paper • paper using ink that will run at a temperature of 150 °c • heat sensitive paper • carbon paper • paper with staples...

  • Page 61

    Mps930b user’s guide> 61 p ower s aver m odes this printer is equipped with a power save mode to reduce power consumption when it is left idle. The default idle time from last print activity until the printer enters power saver mode is 5 minutes. This time can be adjusted by the operator to any of t...

  • Page 62

    Mps930b user’s guide> 62 a dvanced p rinting t asks c over p ages a cover page is the first page of the document. The printer enables you to choose a different paper source for the cover page than for the rest of the document. You can then use a different stock paper for the first page of the docume...

  • Page 63

    Mps930b user’s guide> 63 1. Select standard nup from the finishing mode pulldown in the setup tab of your printer properties. 2. Click options. The standard nup window appears. 3. Enter the desired parameters. Select the desired number of pages per sheet. Check the box if a page border is desired. S...

  • Page 64

    Mps930b user’s guide> 64 select the desired number of signature from the pulldown. Signature sets the number of pages printed on a sheet to form a booklet. Options are no limit, or a number which is a multiple of 4.Enter a bind margin and the units used to calculate the bind margin. Check the box if...

  • Page 65

    Mps930b user’s guide> 65 1. Select the paper feed button in the setup tab within your printer properties. The paper feed options window appears. 2. Click the scale to fit checkbox. 3. Click ok. 4. Click ok. A utomatically r esize p aper the printer can automatically select from the paper available t...

  • Page 66

    Mps930b user’s guide> 66 5. Enter the text to be displayed. 6. Enter the font, typeface, and size of the text. 7. Enter the angle of rotation of the text. 8. Enter the degree of transparency for the text. The text should not obscure the actual text on the printed page. 9. Click ok. 10. Click ok. Ima...

  • Page 67

    Mps930b user’s guide> 67 using the ews, you must have enabled email send and set the email server address for this feature to work. To email notification upon completion: 1. Select the job options tab within your printer properties. 2. Check email on job completion 3. Enter the e-mail address to whi...

  • Page 68

    Mps930b user’s guide> 68 1. Select the job options tab within your printer properties. 2. Click secure print 3. Enter the name of the job 4. Enter pin number to be entered at the operator panel. 5. Click ok. To print a secure job: 1. At the operator panel, press the menu button. Print jobs is displa...

  • Page 69

    Mps930b user’s guide> 69 4. Enter the name of the job 5. Enter pin number to be entered at the operator panel. 6. Click ok. To print the proof: 1. At the operator panel, press the menu button. Print jobs is displayed. 2. Press the forward (right) key. You are requested to enter a pin number. 3. Use ...

  • Page 70

    Mps930b user’s guide> 70 2. Click timed job. 3. Click set time. 4. Enter the elapsed time or real desired. For elapsed time, specify the number of minutes to delay before printing. For real time, enter actual date parameters. 5. Click ok. 6. Enter a job name and pin number. A pin number is only need...

  • Page 71

    Mps930b user’s guide> 71 d irect pdf p rinting the printer’s pdf direct feature allows you to send a version 1.3 pdf file directly to the printer without the use of adobe acrobat on the host computer. You can send a pdf file directly to the printer for printing without using the printer driver. As t...

  • Page 72

    Mps930b user’s guide> 72 5. Click ok to close the overlay window 6. Click ok to close the printer properties. When you do, a window will popup asking you for the name of the overlay. This can be any text you like. 7. Enter a name for the overlay. 8. Click ok. The popup and entire properties window c...

  • Page 73

    Mps930b user’s guide> 73 as a .Csv file by an administrator via the printer ews and processed off line by the users accounting application..

  • Page 74

    Mps930b user’s guide> 74 s ending f iles accessed via the send file menu in the ews, this page allows you to select a file from the client computer (or any file-servers attached to the client computer) and send the file to the printer. A file is selected by typing in the name of the file or browsing...

  • Page 75

    Mps930b user’s guide> 75 n etworking s upported e nvironment this printer can be connected to a network through the ethernet interface. The printer supports multiple protocols. As a result, one printer can be shared even from different network environments. S upported os and e nvironment note when u...

  • Page 76

    Mps930b user’s guide> 76 important • the ethertalk port setting in this printer is disabled by default. To use this port, enable the setting on the operator panel. C onfiguration the b930 is a fast 100base-tx/10base-t network capable printer. It supports major protocols such as tcp/ip and ethertalk....

  • Page 77

    Mps930b user’s guide> 77 1. Launch the ews using the ip address for the printer you are configuring. 2. Enter the username and password for the administrator login. 3. Select the network group. 4. Select the tcp/ip subgroup. 5. Select “set ip manually” 6. Configure the ip address, subnet mask and ga...

  • Page 78

    Mps930b user’s guide> 78 the network printer supports tcp/ip protocol that can be used in conjunction with the windows operating system. Once the printer registered on the windows nt 4.0/windows 2000/ windows xp/windows server 2003 computer is shared, you can also print from windows 95/windows 98/wi...

  • Page 79

    Mps930b user’s guide> 79 been installed refer to the section below installation of tcp/ ip protocol. 2. If not already configured, a suitable ip address, subnet mask and gateway address should be configured. Please refer to the on-line help if necessary. It is vital that the ip address entered is un...

  • Page 80

    Mps930b user’s guide> 80 6. The windows nt installation cd-rom may be required. Follow the remaining dialogue box prompts. Windows 2000 1. Click the [start] button, select [settings] and then click [network and dial-up connections]. 2. Double-click the [local area connection] icon. In the [local are...

  • Page 81

    Mps930b user’s guide> 81 once the protocol has been installed and configured in windows, the next step is to configure the tcp/ip parameters in the network printer. C onfiguring as a n etwork p rinter windows 95/98/me when printing using tcp/ip, the oki lpr utility is the only option to use. The fol...

  • Page 82

    Mps930b user’s guide> 82 6. In [name or address of server providing lpd] type the host name or ip address of the host for the printer you are adding. 7. In [name of printer or print queue on that server] type the logical printer name “lp” and then click [ok]. 8. Follow the instructions on the screen...

  • Page 83

    Mps930b user’s guide> 83 1. Select [start], [settings], [control panel and printers]. 2. Open the [printers] folder. 3. Double-click [add printer] and then select [next]. 4. Select [local printer], clear the [automatically detect my printer] check box, and then select [next]. 5. Select [create a new...

  • Page 84

    Mps930b user’s guide> 84 13. Select [ok]. 14. Select [follow the instructions on the screen to finish installing the printer.] windows xp and vista windows xp requires administrator privileges. With windows xp, there are four options for printing using tcp/ip. • oki lpr • microsoft lpr • port 9100 •...

  • Page 85

    Mps930b user’s guide> 85 the above ip address is entered, the port name will default to ip_172.168.1.31. 9. Click [next]. [additional port information required] displayed. 10. Under [device type], select [custom] then [settings]. 11. Ensure [protocol] is set to [lpr]. 12. Ensure [queue name] is lp a...

  • Page 86

    Mps930b user’s guide> 86 13. Click [ok]. 14. Follow the instructions on the screen to finish installing the printer. C reating a s hared p rinter create a shared printer as required. Settings windows nt 4.0/2000/xp/server 2003 the following procedure explains how to do the settings, using windows xp...

  • Page 87

    Mps930b user’s guide> 87 oki lpr the oki lpr utility is network software which supported tcp/ip printing on windows me, windows 98, and windows 95. It redirects print data from the lpr port to the specified ip address. Installing the oki lpr utility the oki lpr utility requires that the tcp/ip proto...

  • Page 88

    Mps930b user’s guide> 88 14. Select [add printer] on the [remote print] menu. 15. Select [printer] to accept the printer that has been added in step 1. 16. Enter an ip address at [ip address] and click [ok]. A printer is added to the main window. Refer to the on-line help for information on how to u...

  • Page 89

    Mps930b user’s guide> 89 the printer lpd supports spool mode where print jobs from clients are spooled once before output and non-spool mode where print jobs are sequentially output without spooling. Note when the lpd port is used, the printer can limit print instructions by ip addresses. Target com...

  • Page 90

    Mps930b user’s guide> 90 > > the ews allows more detailed settings. 2. Settings of the workstation set the printer in the workstation. Refer to: “setting up the workstation” on page 90 s etting up the w orkstation this section explains the settings of solaris 2.X workstation for printing. Before set...

  • Page 91

    Mps930b user’s guide> 91 3. Registering a logical postscript printer ps01 set using the ews. #lpadmin -p p003 -s printer1\!Ps01 note > enter the host name and printer name of the remote host after -s by linking with !. The printer name corresponds to the print language/mode. > the output style may b...

  • Page 92

    Mps930b user’s guide> 92 -n no. Of copies this option specifies the number of copies. If one "lp" command is issued to print multiple files, the number of copies specified by this option will apply to all the files. However, this option is effective when the printer is in the spool mode. In the non-...

  • Page 93

    Mps930b user’s guide> 93 printer name this option specifies the printer name. The "cancel" command can be effectively used with the combined use of -a, -e and -u as shown below. This option is invalid in the non-spool mode. -a deletes all the print data, sent by a user who issues this command, from ...

  • Page 94

    Mps930b user’s guide> 94 sample to cancel the print data related to the files of printer "p001" (job number: p001-27), enter the following command: %cancel p001-27 to cancel all the printer data of printer "p001", enter the following command: %cancel p001 -e i nquiry (lpstat) the "lpstat" command is...

  • Page 95

    Mps930b user’s guide> 95 -u [user name] this option displays received print data information on users of specified user names. -v [printer name] this option displays the printer name and the device path name. The printer name is specified in the argument. Precautions • long file names will be trunca...

  • Page 96

    Mps930b user’s guide> 96 note > any parameter other than below becomes invalid if specified. Selecting a paper tray when selecting a paper tray, either the paper size or the tray itself is specified. If the paper size is specified, the printer automatically searches and selects the tray where the sp...

  • Page 97

    Mps930b user’s guide> 97 > if an unacceptable combination is specified, the printer may not operate correctly. > for some print language, the specification may be invalid. Selecting a paper output tray the following parameters can be specified: selecting a paper type the following parameters can be ...

  • Page 98

    Mps930b user’s guide> 98 note > if several parameters are specified in one "lpr" command, data may not be printed correctly. > the system default is used if no parameter is specified. > if the print data specifies 2 sided or 1 sided printing, the specification by the data becomes valid and overrides...

  • Page 99

    Mps930b user’s guide> 99 > the system default is used if no parameter is specified. > if the print data specifies 2 sided or 1 sided printing, the specification by the data becomes valid and overrides that by -c option. Specifying collation the following parameter can be specified: note > for some p...

  • Page 100

    Mps930b user’s guide> 100 p rinting to specify the output format of printing, enter the following command: -c, [parameter], [parameter] enter a "," (comma) after -c followed by the parameters which specify the output format. To specify multiple parameters, separate them with ",". For example, to out...

  • Page 101

    Mps930b user’s guide> 101 install the printer driver (adobe ps) for macintosh. Install the screen font if necessary. Connect the printer to the network and select add printer via the printer setup utility or printers and faxes and the plus button. Select other using the print menu and browse to sele...

  • Page 102

    Mps930b user’s guide> 102 • to setup the printer, the user must be a superuser. Contact your network administrator to perform the setup if you do not have the authority of a superuser. • the print language/mode is determined by the printer model and configuration. Before setting a unix workstation, ...

  • Page 103

    Mps930b user’s guide> 103 • in the spool mode, if the print data is bigger than the remaining capacity of the hard disk or the memory at the point of receiving, the data will not be received by the printer. Note > some client workstations may re-send immediately when the print data has exceeded the ...

  • Page 104

    Mps930b user’s guide> 104 • if two or more types of print languages/modes are set up on a single workstation, identical job numbers may be displayed when an inquiry command is issued. • in the non-spool mode, the client must be a windows nt machine to use this option. Others • when the ip address or...

  • Page 105

    Mps930b user’s guide> 105 i nstalling c onsumables the drum unit and toner cartridge should be replaced when they have reached the end of their print life. The drum unit prints about 60,000 images.The toner cartridge prints about 30,000 images. The printer will produce a warning on the operator pane...

  • Page 106

    Mps930b user’s guide> 106 1. Open the printer front and side covers. 2. Remove the drum cartridge from the packing. 3. Remove the protective sheet from the drum cartridge..

  • Page 107

    Mps930b user’s guide> 107 4. Avoid contact with internal surfaces and limit exposure to light for no longer than 5 minutes. 5. Fold the handle down and slide the drum cartridge into the printer. Avoid contact with fingers..

  • Page 108

    Mps930b user’s guide> 108 6. Seat the drum cartridge firmly into the printer. 7. Remove and discard the protective strip. 8. Close the printer covers..

  • Page 109

    Mps930b user’s guide> 109 i nstalling the t oner c artridge toner cartridge, (30k life), oki part#.......52117101 when installing the toner cartridge, take note of the following points: warning > never throw a toner cartridge into an open flame. It could cause an explosion and you can get burned. > ...

  • Page 110

    Mps930b user’s guide> 110 2. Remove the toner cartridge from its packing. 3. Take the toner cartridge out of the box and shake it 8 to 10 times as shown in the diagram..

  • Page 111

    Mps930b user’s guide> 111 4. Slide the toner cartridge into the printer and seat firmly in place. 5. Close the printer covers..

  • Page 112

    Mps930b user’s guide> 112 t roubleshooting your printer’s operator panel provides you with information and troubleshooting help. When an error or warning condition occurs, the operator panel displays a message informing you of the problem. Hardware or software failures that may require service suppo...

  • Page 113

    Mps930b user’s guide> 113 p oor p rint q uality when the print quality is poor, select the closest symptom from the following table to rectify the problem. If the print quality does not improve after carrying out the appropriate action, contact our printer support desk. Symptom causes solutions ligh...

  • Page 114

    Mps930b user’s guide> 114 black prints - the entire printed page is black. 1. The drum cartridge may be defective. 2. Printable data from the computer may be corrupted. 1. Replace the drum cartridge. 2. Print a configuration page. - if the configuration page prints correctly, check the interface cab...

  • Page 115

    Mps930b user’s guide> 115 horizontal dark streaks - there are black lines that appear horizontally on the page. 1. The drum cartridge may be defective or at the end of its life. 2. The paper path may be contaminated with toner. 3. The fuser may be defective. 1. Replace the drum cartridge. 2. Print s...

  • Page 116

    Mps930b user’s guide> 116 unfused or partially fused image - the printed image is not fully fused to the paper and easily rubs off. 1. The paper may be damp. 2. Heavy or unusual paper may be in the tray. 3. The printer may be located in an environment with extreme temperature or humidity. 4. The fus...

  • Page 117

    Mps930b user’s guide> 117 blurred prints - the image is blurred at theedges. 1. The paper may be in poor condition. 2. The paper may be damp. 3. The drum cartridge may be defective. 1. Replace the paper. 2. Replace the paper. 3. Replace the drum cartridge. Random or spot deletions - areas of the pri...

  • Page 118

    Mps930b user’s guide> 118 n o p ower c annot p rint status items to check action there is no power. Is the power switched off? Press the printer switch to the position to turn the power on. Is the power cord disconnected or not securely connected? Switch off the power and connect the cord to the pow...

  • Page 119

    Mps930b user’s guide> 119 p rinting is n ot c lear p aper i ncorrectly f ed status items to check action transparencies are not printed clearly. Are the correct type of transparencies used? Load the correct type of transparencies. Are the transparencies correctly loaded in the paper tray? Load the t...

  • Page 120

    Mps930b user’s guide> 120 n oise n etwork t roubleshooting using tcp/ip this section provides information on the possible causes, verifying methods and recommended actions pertaining to errors which may occur when the printer is used with tcp/ip. Status items to check action strange noise occurs. Is...

  • Page 121

    Mps930b user’s guide> 121 when usin windows 95/98/me cause treatment the printer and the computer are connected to different networks. Status display unable to print (network error) verification check with the system administrator of the network verify that the network connecting the computer and th...

  • Page 122

    Mps930b user’s guide> 122 u sing w indows nt 4.0/2000/xp/v ista /s erver 2003 the printer is not printing unable to obtain the desired print results cause verification action incorrect ip address. Ask the network administrator to check if the ip address is correct set up the correct ip address for t...

  • Page 123

    Mps930b user’s guide> 123 w hen u sing u nix the printer is not printing cause verification action incorrect ip address. Ask the network administrator to check if the ip address is correct set up the correct ip address for the printer. Error occurs on the network connecting the workstation and the p...

  • Page 124

    Mps930b user’s guide> 124 unable to obtain the desired print results the data format of the print job does not conform to the printing environment of the workstation. (print data from the client contains tbcp.) - specify psasc on the client side to print data containing tbcp by the postscript langua...

  • Page 125

    Mps930b user’s guide> 125 u sing e ther t alk this section provides information on the possible causes, verifying methods and recommended actions pertaining to errors which may occur when the printer is used with ethertalk. The printer is not printing cause treatment the name (or the default name) o...

  • Page 126

    Mps930b user’s guide> 126 the printer is not connected. Cause 1 on the macintosh, the printer is not selected correctly in the chooser. Or, the printer is processing another job. Verification 1 check that the printer is selected correctly on the macintosh. If the printer is processing another job, t...

  • Page 127

    Mps930b user’s guide> 127 although it is connected, the printer does not print. Cause 1 the printer is in the offline status. Verification 1 check whether off-line is displayed on the printer operator panel. Action 1 press the button. Cause 2 the print language of the printer and that of the printer...

  • Page 128

    Mps930b user’s guide> 128 e rror and w arning m essages message description 0-1 main motor call service system error 1-1 main motor call service main motor error 1-4 drum motor call service drum motor error 3-3 and 3-5 ros error call service raster output scanner error 4-1 through 4-9 fuser error ca...

  • Page 129

    Mps930b user’s guide> 129 4-6 paper jam clear area a/e exit area jam 8-2 paper jam clear area a/e dm area jam 6-1 through 6-2 feed error clear duplexer dm area jam 1-2 feed error area a/tray 2 paper tray area - misfeed jam 1-3 feed error area a/tray 1 paper tray area - misfeed jam 2-1 feed error are...

  • Page 130

    Mps930b user’s guide> 130 4-4 feed error clear area b paper tray area - misfeed jam 5-1 feed error clear area b/c paper tray area - misfeed jam 5-2 feed error clear area b/c paper tray area - misfeed jam 5-3 feed error clear area b/c paper tray area - misfeed jam 8-2 feed error clear area b paper tr...

  • Page 131

    Mps930b user’s guide> 131 4-61 finish jam clear area h finisher jam (compiler no paper sensor) 4-66 finish jam clear area h finisher jam (compiler no paper sensor) 4-71 through 4-78 finish jam clear area h finisher jam (top tray exit sensor) 4-82 though 4-88 finish jam clear area h finisher jam (gat...

  • Page 132

    Mps930b user’s guide> 132 paper out tray 1 paper out tray 2 paper out tray 3 paper out tray 4 paper out tray 5 paper out hcf 8-3 ep cartridge reset ep cart drum/toner cartridge memory communication failure 7-7 tm error check tm tray module communication failure 6-7 hcf error check hcf hcf communicat...

  • Page 133

    Mps930b user’s guide> 133 5-12 fin error call service mechanical failure in stacker tray 5-13 fin error call service mechanical failure in stacker tray 5-21 fin error call service mechanical failure in tamper 5-22 - 5-23 fin error call service mechanical failure in tamper 5-31 - 5-34 fin error call ...

  • Page 134

    Mps930b user’s guide> 134 2-8 duplex error call service dm model error staple fail check stapler staple ng staple set error check stapler staple set over count stacker error check finisher stacker lower safety fail punch waste full empty waste box punch scraps box full no punch waste install box no ...

  • Page 135

    Mps930b user’s guide> 135 1-2 ep cartridge replace ep cart toner cartidge empty toner low toner cartidge low atc sensor warning atc sensor warning temp sensor warning temperature sensor warning hum sensor warning humidity sensor warning hcf lifting lifting warning is only shown for tray6 (hcf) hcf u...

  • Page 136

    Mps930b user’s guide> 136 m aintenance c leaning the p rinter this section describes how to clean the printer in order to maintain the printer in good condition. Caution > caution: be sure to switch off and unplug the machine before accessing the interior of the machine for cleaning, maintenance, or...

  • Page 137

    Mps930b user’s guide> 137 > caution: never touch areas labelled as “high voltage.” you can get an electric shock. Never touch a labelled area found on or near the heat roller. You can get burned. If a sheet of paper is wrapped around the heat roller, do not try to remove it by yourself to avoid inju...

  • Page 138

    Mps930b user’s guide> 138 recessed areas provided on both sides of the printer. Never try to lift the printer by gripping any other areas. Lifting the printer by gripping any other areas can cause the printer to fall and result in injuries. If the optional paper trays have been installed, uninstall ...

  • Page 139

    Mps930b user’s guide> 139 3. Remove any paper in the mpf tray (1). 4. Pull out the remaining paper trays and remove any paper. Keep the paper wrapped and away from humidity and dirt..

  • Page 140

    Mps930b user’s guide> 140 5. Open the front and side covers. Note > do not touch any parts inside the printer. 6. Hold the drum cartridge by the grip to pull it out slowly. Note > it is necessary to remove the toner cartridge. If you move the printer with the toner cartridge installed, the toner may...

  • Page 141

    Mps930b user’s guide> 141 7. Hold the toner cartridge securely and pull it out slowly. Note > do not shake the toner cartridge after it has been removed from the printer. The toner will spill. > after removing the toner cartridge, put it into its original aluminum bag or wrap it with a thick cloth. ...

  • Page 142

    Mps930b user’s guide> 142 9. Lift the printer and move it gently. If the printer is to be moved over a long distance, pack it inside a box. F user u nit this section explains the fuser unit replacement. C aution on h andling the f user u nit the fuser unit is included as one of the regular replaceme...

  • Page 143

    Mps930b user’s guide> 143 2. Open the printer left side door. 3. Loosen the two knobs securing the fuser to the frame. 4. Pull the fuser toward you by holding the two handles. 5. Unpack the new fuser from its container. 6. Carefully insert the fuser by holding the two handles. 7. Secure the fuser by...

  • Page 144

    Mps930b user’s guide> 144 t ransfer r oll c artridge this section explains about the transfer roll cartridge. C aution on h andling the t ransfer r oll c artridge the transfer roll cartridge is included as one of the regular replacement parts. Before replacing the transfer roll cartridge, open the b...

  • Page 145

    Mps930b user’s guide> 145 3. Pinch the hooks at each end of the transfer roller and lift to remove the transfer roller from the chute. 4. Grasp the new transfer roller by the hooks. 5. Carefully insert the new transfer roller into its mounting and reseat the hooks. 6. Close the door. 7. Turn the pri...

  • Page 146

    Mps930b user’s guide> 146 c learing p aper j ams when there is a paper jam, refer to the following procedures and follow the instructions. Caution > caution: never touch areas labelled as “high voltage.” you can get an electric shock.Never touch a labelled area found on or near the heat roller. You ...

  • Page 147

    Mps930b user’s guide> 147 1. Open door a. 2. Pull the jammed paper out of the printer. If necessary, press the green handle to move the paper to make it easier to remove. Confirm that all paper fragments are removed..

  • Page 148

    Mps930b user’s guide> 148 3. Close door a. J am at b follow these steps to clear the jam. 1. If the printer has the 2000-sheet feeder (tray 6), slide the feeder away from the printer..

  • Page 149

    Mps930b user’s guide> 149 2. Open door b. 3. Pull the jammed paper out of the printer. Confirm that all paper fragments are removed..

  • Page 150

    Mps930b user’s guide> 150 4. Close door b. 5. If the printer has the 2000-sheet feeder (tray 6), slide the feeder firmly against the printer. J am at c follow these steps to clear the jam..

  • Page 151

    Mps930b user’s guide> 151 1. If the printer has the 2000-sheet feeder (tray 6), slide the feeder away from the printer. 2. Open door c..

  • Page 152

    Mps930b user’s guide> 152 3. Pull the jammed paper out of the printer. Confirm that all paper fragments are removed. 4. Close door c..

  • Page 153

    Mps930b user’s guide> 153 5. If the printer has the 2000-sheet feeder (tray 6), slide the feeder firmly against the printer. J am at d follow these steps to clear the jam. 1. Open door d..

  • Page 154

    Mps930b user’s guide> 154 2. Pull the jammed paper out of the printer. Confirm that all paper fragments are removed. 3. Close door d. J am at e follow these steps to clear the jam..

  • Page 155

    Mps930b user’s guide> 155 1. Open door a. 2. Open door e..

  • Page 156

    Mps930b user’s guide> 156 3. Pull the jammed paper out of the printer. Confirm that all paper fragments are removed. 4. Close door e..

  • Page 157

    Mps930b user’s guide> 157 5. Close door a. J am at f follow these steps to clear the jam. 1. Open door f..

  • Page 158

    Mps930b user’s guide> 158 2. Pull the jammed paper out of the printer. Confirm that all paper fragments are removed. 3. Close door f. J am at g follow these steps to clear the jam..

  • Page 159

    Mps930b user’s guide> 159 1. If visible, pull the jammed paper out of the stacker upper tray. 2. Open door g. 3. Depending on the instructions shown on the operator panel, open handle 2a, handle 2b, or handle 3 as shown on the instruction labels. Note > if the stapler is in the way, slide the staple...

  • Page 160

    Mps930b user’s guide> 160 5. Pull the jammed paper out of the printer. Confirm that all paper fragments are removed. 6. Close the handles opened in step 3. 7. Close door g. J am at h follow these steps to clear the jam. 1. Lift door h..

  • Page 161

    Mps930b user’s guide> 161 2. Pull the jammed paper out of the printer. Confirm that all paper fragments are removed. 3. Close door h. J am at the s tacker u pper t ray follow these steps to clear the jam. 1. Pull the jammed paper out of the stacker upper tray..

  • Page 162

    Mps930b user’s guide> 162 2. Open door g. 3. Close door g..

  • Page 163

    Mps930b user’s guide> 163 p aper j am in t ray 5 (mpf) follow these steps to clear the paper jam in tray 5. 1. Verify that the width guides are pressed against the paper. 2. If the paper size and type shown on the operator panel match the size and type of the paper in the tray, press the ok button. ...

  • Page 164

    Mps930b user’s guide> 164 5. Pull the jammed paper out of the printer. If necessary, press the green handle to move the paper to make it easier to remove. Confirm that all paper fragments are removed. 6. Close door a. P aper j ams in t rays 1-4 follow these steps to clear the paper jam in trays 1-4..

  • Page 165

    Mps930b user’s guide> 165 1. Pull out the tray specified on the operator panel. 2. Verify that the length and width guides are pressed against the paper. 3. Push the tray completely into the printer. 4. Specify the size of the paper in the operator panel..

  • Page 166

    Mps930b user’s guide> 166 5. Open door a. 6. Pull the jammed paper out of the printer. If necessary, press the green handle to move the paper to make it easier to remove. Confirm that all paper fragments are removed..

  • Page 167

    Mps930b user’s guide> 167 7. Close door a. P aper j am in t ray 6 follow these steps to clear the paper jam in tray 6. 1. Pull out tray 6. 2. Verify that the length and width guides are set correctly.

  • Page 168

    Mps930b user’s guide> 168 note > the default setting is for 8.5 x 11 in. Paper. You must change the guides for a4 paper. 3. Push the tray completely into the printer. 4. Specify the size of the paper in the operator panel. 5. Open door a..

  • Page 169

    Mps930b user’s guide> 169 6. Pull the jammed paper out of the printer. If necessary, press the green handle to move the paper to make it easier to remove. Confirm that all paper fragments are removed. 7. Close door a..

  • Page 170

    Mps930b user’s guide> 170 i nstalling a ccessories d uplex m odule caution > be sure to switch off the power and unplug the power cord from the outlet before carrying out the operations.If not, you might get an electric shock. C heck the contents of the d uplex option unpack the carton and confirm t...

  • Page 171

    Mps930b user’s guide> 171 1. Unpack the option duplex, remove cushioning materials, and confirm that all attachments are available. 2. Open printer door a..

  • Page 172

    Mps930b user’s guide> 172 3. Remove cover and save for possible reuse. 4. Slide the exit 2 module into position..

  • Page 173

    Mps930b user’s guide> 173 5. Close printer door a. 6. Place the duplex unit in position while inserting the 2 hooks on the bottom of the unit into the shown locations in the receptors of the printer..

  • Page 174

    Mps930b user’s guide> 174 7. Lift the duplex unit until the upper hooks are latched in the printer. 8. Open the duplex unit cover by lifting latch d..

  • Page 175

    Mps930b user’s guide> 175 9. Twist the 2 locking screws clockwise to secure the duplex unit to the printer. 10. Close the duplex unit cover..

  • Page 176

    Mps930b user’s guide> 176 11. Remove the printer access cover (1), connect the duplex unit interface cable (2) and replace the printer access cover (3). 12. Connect the power cord. 13. Turn on the power switch of the laser printer. 14. Try some test duplex-printings to confirm that there is no probl...

  • Page 177

    Mps930b user’s guide> 177 1. Switch off the printer power. 2. Remove the power cord from the printer. 3. Unpack the paper feeder and remove cushioning materials. 4. Place the paper feeder in an installation location. 5. Fit the holes on the bottom of the laser printer with the four positioning bosse...

  • Page 178

    Mps930b user’s guide> 178 6. Remove the packing tape from the paper feeder. 7. Slide out the 2 drawers..

  • Page 179

    Mps930b user’s guide> 179 8. Remove all packing materials from both drawers. 9. Slide both drawers back into the paper feeder. 10. Remove printer drawer 3..

  • Page 180

    Mps930b user’s guide> 180 11. Insert the 2 locking screws, turning clockwise to secure the printer to the feeder. 12. Replace drawer 3 back in the printer..

  • Page 181

    Mps930b user’s guide> 181 13. Remove the printer interface panel cover (1), connect the 1000 sheet feeder interface connector (2) and replace the printer interface panel cover (3). 14. Connect the power cord. 15. Turn on the power switch of the laser printer. 2000 s heet h igh c apacity f eeder 1. S...

  • Page 182

    Mps930b user’s guide> 182 3. Unpack the paper feeder and remove cushioning materials. 4. Slide the drawer out of the paper feeder..

  • Page 183

    Mps930b user’s guide> 183 5. Remove the packing material from the feeder drawer. 6. Slide the drawer back into the feeder. 7. Install the mounting bracket..

  • Page 184

    Mps930b user’s guide> 184 8. Slide the 2000 sheet feeder to the mounting plate guiding it on the locating pin until it latches. 9. Remove the shipping hardware and discard. 10. Adjust the feet on the feeder assembly to set the feeder position parallel to the printer. 1 2.

  • Page 185

    Mps930b user’s guide> 185 11. Connect the feeder power cord into the printer accessory outlet. 12. Slide the drawer out of the feeder. 13. Remove the shipping screws..

  • Page 186

    Mps930b user’s guide> 186 14. Adjust the feeder paper size guides. 15. Load the paper tray. 16. Connect the power cord. 17. Turn on the power switch of the laser printer. 3500 s heet f inisher the finisher provides a main 3000 sheet lower stacker and a top 500 sheet stacker. It also provides a stapl...

  • Page 187

    Mps930b user’s guide> 187 and a 4 hole capability while in the americas, the punch is a 3 hole punch 1. Switch off the printer power. 2. Remove the power cord from the printer. 3. Unpack the horizontal transport and position on top of the printer. 1 2.

  • Page 188

    Mps930b user’s guide> 188 4. Insert the 2 mounting screws to secure the horizontal transport. 5. The guides from the printer itself must be moved to the exit 2 module. The guides are a two pieces of rubber and plastic that assist in stacking to the top of the printer. When installing the horizontal ...

  • Page 189

    Mps930b user’s guide> 189 7. Insert the 2 mounting screws to secure the bracket. 8. Remove all the packing materials from the finisher..

  • Page 190

    Mps930b user’s guide> 190 9. Slide the finisher into position engaging the latching hardware 10. Insert the stacker lower catch tray..

  • Page 191

    Mps930b user’s guide> 191 11. Remove the access cover and plug in the finisher interface cable. 12. Remove the printer interface cover. 13. Connect the interface connector and replace the cover. 1 2.

  • Page 192

    Mps930b user’s guide> 192 14. Connect finisher power cord to the printer accessory power connection. 15. Level the finisher making it parallel to the printer..

  • Page 193

    Mps930b user’s guide> 193 16. Open the finisher door. 17. Remove the internal tags and shipping brackets..

  • Page 194

    Mps930b user’s guide> 194 18. Move the catch to the right. 19. Insert the staple module.

  • Page 195

    Mps930b user’s guide> 195 20. Unpack the paper punch waste container. 21. Insert the punch waste dust container.

  • Page 196

    Mps930b user’s guide> 196 22. Fully seat into position. 23. Close the finisher door. H ard d isk o ption 1. Carefully review the safety precautions in the front of this guide before starting this installation procedure. 2. Ensure that the printer power switch is set to the off [o] position. 3. Disco...

  • Page 197

    Mps930b user’s guide> 197 4. Remove side cover from printer. 5. Turn thumbscrews on controller assembly counter clockwise until loose and gently pull cover towards you to remove from printer. 6. Carefully insert the hard drive into the socket, being careful not to damage the fragile pins. Add new gr...

  • Page 198

    Mps930b user’s guide> 198 7. Seat the hard drive over the locating pins and push firmly to seat the unit. 8. Reinstall the side covers in reverse order. 9. Connect the power cord to the wall outlet.Turn the printer power switch to the on [i] position. I nstalling the m emory o ption and c ompact f l...

  • Page 199

    Mps930b user’s guide> 199 4. Turn screws on controller assembly counter clockwise until loose and gently pull cover towards you to remove from printer. 5. Carefully insert a ddr memory module which is compatible with your printer into the slot as shown below. When properly seated, gently push down o...

  • Page 200

    Mps930b user’s guide> 200 o perator p anel this appendix provides a description of operator panel menu and menu item. Navigate to items as described in “embedded web server” on page 48. Menu parameter default description information menu print menu map execute prints the menu map print pcl fonts exe...

  • Page 201

    Mps930b user’s guide> 201 lines per page 57- executive 39-monarch envelope 51-com10 envelope 46-dl envelope 48-c5 envelope 47-com9 envelope 29-a6 43-a5 45- statement 54-b5 60-letter 64-a4 71-legal13 78-legal14 set number of lines per page auto tray switch on enable auto switch of paper tray separato...

  • Page 202

    Mps930b user’s guide> 202 system adjust menu pcl tray 1 id# 1 pcl tray id pcl tray 2 id# 4 pcl tray id pcl tray 3 id# 5 pcl tray id pcl tray 4 id# 6 pcl tray id pcl tray 5 id# 1 pcl tray id pcl tray 6 id# 4 pcl tray id pcl auto id# 7 pcl tray id hex dump disable hex dump date/time month current mont...

  • Page 203

    Mps930b user’s guide> 203 tray 2 media type plain set the media type tray 3 media type letter set the media size tray 4 media type plain set the media type tray 1 custom size plain set the media size tray 2 custom size letter set the media size tray 3 custom size if two-tray feeder use custom set th...

  • Page 204

    Mps930b user’s guide> 204 tray 5 y dimension 2216mm set the paper length printer sys config menu personality auto emulation pcl postscript 3 auto emulation language english other english ps system start power save delay time 5 set delay time in minutes for printer to enter power saver low toner cont...

  • Page 205

    Mps930b user’s guide> 205 character set set-2 default character set symbol set 8u:roman 8 default font letter o style disable selects replacing ¢(9b) and ¥(9d) with (ou) (zero) respectively zero character normal selects not slashed or slashed zero character. Line pitch 6 lpi default lines per inch c...

  • Page 206

    Mps930b user’s guide> 206 dtr onl/offl off serial signal dtr error off serial signal rts ready/busy serial signal on/off rts onl/offl off serial signal rts error off serial signal xon ready/busy on serial signal xon onl/offl on serial signal xon error off serial signal dtr polarity high serial signa...

  • Page 207

    Mps930b user’s guide> 207 delete delete selected spool file delete selected spool file destination spool device spool device save/restore save menu restore menu (menu reset) information print status page network general network settings system contact system name system location printer asset number...

  • Page 208

    Mps930b user’s guide> 208 current settings frame type netware mode pserver mode settings print server name nds tree name nds context job poll interval nprinter mode settings print server sap name remote printer number ethertalk enable ethertalk zone name ethertalk printer name email smtp send smtp s...

  • Page 209

    Mps930b user’s guide> 209 snmp trap settings trap community printer trap address printer trap assignments user flash directories delete selected file delete file print selected file print file copies execute print media info and directory print summary execute print media info and directory user fla...

  • Page 210

    Mps930b user’s guide> 210 copies execute print media info and directory print summary execute print media info and directory cflash summary execute print media info and directory format execute format media format comp flash execute format media data security off overwrite delete data with random da...

  • Page 211

    Mps930b user’s guide> 211 restore port to factory defaults execute reset menu to default restore net to factory defaults execute reset menu to default usage page count current count total prints produced fuser count current count total prints since fuser maintenance toner current level percentage of...