Oki OF5650 Software Update - page 2
Setting up Clients on a Network
Unimessage Pro LAN can be installed on up to 5 clients (1 administrator and 4 clients). The
MFP connected to the fax server PC is shared among these 5 users. When you do this, do not install
the client copies from the CD-ROM—only one scheduler can run on a network at a time. Follow this
procedure:
Note: If you are using Windows NT 4.0 or Windows 2000, make sure you have administrator
access rights.
1. If the drive where Unimessage Pro is installed is not mapped on the client:
a. Use Network Neighborhood to browse to the folder where Unimessage Pro is installed and
shared.
b. Right click on the Unimessage Pro folder and select Map network drive from the menu.
c. Select a suitable drive letter.
2. Select the Client folder on the mapped drive and run SETUP.EXE.
3. Confirm the drive where Unimessage Pro is installed; the suggested drive is usually correct.
After registering the location of its components and installing any required updates, restart
Windows. Unimessage Pro continues installation. Follow the instructions carefully. For details on
all installation options, see the User’s Guide, which you can read by clicking View Unimessage
Pro User’s Guide from the Setup menu.
Note: When you start Unimessage Pro on a client, you may see a dialog saying “Unimessage
Pro is having difficulty communicating with the scheduler over the network...Awaiting
response from Scheduler.” Click Abort, and Unimessage Pro will start normally.
MFP as Network Printer
You can also use your MFP as a network printer using Unimessage Pro LAN. Follow these
additional steps to set up the fax server PC (connected to the MFP) and the client(s) for network
printing.
Fax Server
1. Make sure the MFP drivers are installed on the fax server PC and that Unimessage Pro LAN is
installed.
Note: The status monitor must be running on the fax server PC.
2. Set up the MFP driver as a shared printer with an assigned name: From Settings
→Printer, right-
click the MFP icon and select Properties.
3. Open the Sharing tab,select Shared,then enter a name.
Client
Windows 2000/NT 4.0/Me/98/95
1. From Settings
→Printer,click Add Printer.
2. Click Next at the opening screen.
3. Select Network and click Next.
4. If you know the path name for the MFP, enter it, click Next, and skip to step 6.
5. Click Next. Browse to the MFP you want, highlight it, and click Next.
6. When prompted “Do you want this to be the default printer?” select Yes and click Next.
7. Click Finish.
Oki Data Americas, Inc., 2000 Bishops Gate Blvd., Mt. Laurel, NJ 08054-4620
Tel: (856) 235-2600 FAX: (856) 222-5320 http://www.okidata.com
Oki Data Americas, Inc., 2735 Matheson Blvd. East, Unit 1, Mississauga, Ontario, Canada L4W M8
Tel: (800) 654-3282 FAX: (905) 238-4427
58347901