Oki OF5650 User Manual - page 220

212

OKIFAX 5650

|

Your fax machine is connected to a PBX and you

cannot dial out.

• You must enter your access digit to reach an outside line

before the telephone number for each number that you

dial or program into your machine. Also, your fax machine

must be programmed for PBX operation before it will

work.

Refer to “Setting Basic Features, Connecting to a PBX.”

Your fax machine does not answer the phone or

receive faxes. 

• First make sure that your fax machine is turned on and the

power cord is connected to the AC outlet.

• If you have a handset connected to your fax machine,

check that there is a dial tone on the phone line.

• Check the reception mode you are using. Your fax

machine will not automatically receive faxes in manual

answering mode [TEL]. In TAD mode, the answering

machine answers the call first.

Refer to “Setting Basic Features, Answering Mode.”

You tried dialing with a One-Touch key or an Auto

Dial code, but nothing happened. 

• Make sure that something is programmed into the One-

Touch key or Auto Dial code you are using.

• Check the fax number to make sure it was entered

correctly.

Refer to the “Programming Speed Dial Numbers.”

• When you are dialing with an Auto Dial code, be sure to

press the Auto Dial key before you enter the code.

• If your fax machine has the Dial Parameter, Auto Start

feature turned off, you will have to press the Start key

before dialing will begin.

Refer to “Setting Basic Features, Dial Parameters

Settings.”