Oki Okipage8z Product Update
OKIPAGE 8z Product Update
To Set Up your OKIPAGE 8z using Windows XP with USB or Parallel Connection:
Follow steps 1 through 6 in the Quick Setup guide. Then follow the instructions below.
Start with both the printer and the computer off.
Turn on the computer.
When Windows has started, turn on the printer.
When you see “Welcome to the Found New Printer Wizard,” put the Oki Windows XP Driver CD in your CD drive.
Note:
Windows XP may recognize a picture file on the disk and open a dialog listing things it can automatically do. If
this happens, click Cancel.
If you see a “Hardware Installation” warning message, click Continue Anyway. The driver you are installing will not
damage your system.
Install Additional Software
With the OKIPAGE 8z Software CD—not the Oki Windows XP CD--in your CD-ROM drive:
Click Start
®Run.
Type in D:\install.exe, where “D” is the letter of your CD-ROM drive. Click OK.
Click the language of your choice.
Click the button beside Additional Software. The User’s Guide, Status Monitor, Product Registration and Readme file
will install.
Follow the instructions on your screen to complete the installation and restart your computer.
Activate the Status Monitor
Use the on-screen Status Monitor to monitor print jobs, check printer status, and set certain printer features.
From the Taskbar, click Start
®Programs®OKIPAGE 8z®OKIPAGE 8z Status Monitor.
To view the User’s Guide
From the Taskbar, click Start
®Programs®OKIPAGE 8z®OKIPAGE 8z User’s Guide.
58360201
Oki Data Americas, Inc. 2000 Bishops Gate Blvd., Mt.Laurel, NJ 08054-4620
1-800-OKI-DATA (1-800-654-3282) Fax: 856-222-5247 www.okidata.com