_____________________________________________________________________________________________ operating manual before attempting to connect or operate this product, please read these instructions completely on-screen-display optical low pass filter (olpf) switching mechanism ccd zoom camera szx23-14...
______________________________________________________________________ - 1 - 1. General this camera features a new ultra super high sensitive near infra-red ccd sensor and the combination of special optical and digital electronic processing circuit, deliver a high resolution, sharp, crisp image at d...
______________________________________________________________________ - 2 - dc 12v 3. Major control and their function -- a. Holder screw hole the mounting hole is a standard photographic pan-head screw size (1/4” – 20) b. Dc12v block terminal this terminal accepts dc12v please add + & - to power t...
______________________________________________________________________ - 3 - page1 main menu page2 main menu page3 main menu page4 main menu page 5 main menu 4.1 camera identification setting (camera id) move cursor to camera id, press enter key to enter id function selecting menu, then press up or ...
______________________________________________________________________ - 4 - id character menu move cursor to position, press enter key to enter id position selecting menu, then press up or down key to select id postion l-u, r-d, l-d or r-u. Camera id edit menu 4.2 sense up move cursor to sense up, ...
______________________________________________________________________ - 5 - press enter key to enter fix level selecting menu, then press up or down key to select min, +1, +2, +3, +4, +5, +6, +7, max. Fix level adjustment menu 4.4 aes (auto exposure mode) 4.4.1 aes fix mode move cursor to aes, pres...
______________________________________________________________________ - 6 - press enter key to enter blc area adjustment menu. Area and level adjustment menu press enter key to set blc area block. Press up or down key to select blc area block. Opd window this method is suited for cases where the ma...
______________________________________________________________________ - 7 - page 2 main menu press enter key to enter atw level adjustment menu, then press up or down key to select red, red+, red++, red+++, middle, blue, blue+, blue++,blue+++, 9 steps adjustable. Atw level adjustment menu move curs...
______________________________________________________________________ - 8 - r-y gain adjustment menu move cursor to b-y gain, press enter key to enter b-y gain adjustment menu, then press up or down key to select min, +1, +2, +3, +4, +5, +6, +7, max, 9 steps adjustable. R-y gain adjustment menu 4.8...
______________________________________________________________________ - 9 - 4.11 focus move cursor to focus, press enter key to enter focus adjustment menu. Page 2 main menu press up or down key to select focus far to near. Focus adjustment menu 4.12 auto focus move cursor to auto focus, press ente...
______________________________________________________________________ - 10 - press enter key to enter position load selectng menu. Press up or down key to select position (1 to 64 position that you want to load), then press enter key that will be loaded. Position load menu press enter key to enter ...
______________________________________________________________________ - 11 - page 3 main menu 4.16 motion motion detection function move cursor to motion, press enter key to enter motion on/off menu. Press up or down key to select on. Page 3 main menu press enter key to enter motion function menu. ...
______________________________________________________________________ - 12 - off x 2 x 4 x 6 x 8 x 12 x 16 x 32 x 64 base x x max 16 15 14 13 11 9 +1 x max 15 14 13 12 11 9 7 +2 x 16 14 13 12 11 10 8 6 +3 x 15 13 12 11 10 9 7 5 +4 max 14 12 11 10 9 8 6 4 +5 16 13 11 10 9 8 7 5 3 +6 15 12 10 9 8 7 6...
______________________________________________________________________ - 13 - 4.19 default restart the camera and reset parameters to factory’s default. Move cursor to default, press enter key to enter default cancel/ok menu. Press up or down key to select ok, and then press enter key. Page 4 main m...
______________________________________________________________________ - 14 - 4.23 focus speed focus speed adjustment move cursor to set focus speed, press enter key to focus speed selecting menu, then press up or down key to select min, +1, +2, +3, max (5 steps adjustable). Page 4 main menu 4.24 ga...
______________________________________________________________________ - 15 - 4.27 scale zoom scale display move cursor to scale, press enter key to enter scale on/off menu. Press up or down key to select on/off. The zoom scale will be display on right-down of the screen in scale on mode. Note: the ...
______________________________________________________________________ - 16 - 4.30.1 h-revers horizontal reverse (mirror) function move cursor to h-revers, press enter key to enter freeze on/off menu. Press up or down key to select on/off. Misc menu 4.30.2 v-revers vertical reverse (up-side down) fu...
______________________________________________________________________ - 17 - 4.30.5 mask a / b masking area setting move cursor to mask a/b, press enter key to enter mask a/b menu. Press up or down key to select on/off. Then press enter key to enter mask a/b setting menu. Misc menu move cursor to h...
______________________________________________________________________ - 18 - correct reference circuit 01 iris + 07 rs485 + 02 iris - 08 rs485 - 03 focus + 09 motion out 04 focus - 10 gnd 05 zoom + 11 alarm in 06 zoom - 12 gnd +12v r2 1k 1 2 focus +12v zoom zoom- focus- zoom+ mdet-h +12v alarm 1 2 ...
______________________________________________________________________ - 19 - 6. Rs-485 control ** for using rs-485 serial control, camera address id must be set before connecting to the chain system, please refer to 4.31 camera address id setting (p.23). 6.1 protocol select 6.2 keyboard functions c...
______________________________________________________________________ - 20 - [80]+preset atw [81]+preset digital zoom on [82]+preset auto focus on [83]+preset zoom +af on [84]+preset lens initial on [85]+preset motion on [86]+preset freeze on [87]+preset mirror on [88]+preset up/down on [89]+preset...
______________________________________________________________________ - 21 - [87]+set mirror off [88]+set up/down off [89]+set mask 1 off [90]+set mask 2 off [99]+set camera address id display off ** for keyboard not containing “clear” key, following commands cannot be executed. [1~64]+clear clear ...
______________________________________________________________________ - 22 - 9. Specifications model no. Szx23-1480 szx23-1480p signal system ntsc pal image sensor 1/4-inch super had ccd image sensor picture elements 795(h) x 596(v) / 811(h) x 508(v) scanning system 625lines, 2:1 interlace / 525lin...
