Oki WDS-HDR1520 Operating Manual - page 5

● 

Applicable for WDS-HDR1527DN & WDS-HDR1520 

▲ Only Applicable for WDS-HDR1527DN 

 -5 

- 

5.ENTER button-Press this button to display the setting menu, if the selected item has its 

own menu; press this button to enter sub menu. 

PC control 

For window 95/98/ME/2000/XP 

1. Insert the floppy into diskette drive   

2. Execute OSD_CONT.EXE 

3. A keypad icon will be displayed on screen 

4. Use mouse to point the icon for on-screen-display setting. 

RS-232 Connection Please refer to the Setup option        

In the program window (com2 default)   

1.RX pin----SD (D-sub 9) pin 3 from PC   

2.TX pin----RD (D-sub 9) pin 2 from PC 

3.NC 

4.GND------GND (D-sub9) pin 5 

1/O port The port can send or received signal by external device.

Select option mode by OSD D/N function   

The camera can switch day or night by external device when it select 

External mode. 

And other mode can send signal to external device. Day (oV0, Night (+5) 

▲ 

Only applicable for WDS-HDR1527DN

5. SETTING MENU AND FUNCTIONS 

FOCUS ADJ 

MISC 

END INIT  ↑ UNLOCK 

SETUP MENU 

 CAMERA ID   

OFF 

SENSE UP 

OFF 

LIGHT CNTL 

WD MODE 

WHITE BAL 

ATW   

PICTURE  

VIDEO 

1. Press the ENTER key to enter main menu. 

2. Press UP/DOWN key to select the item for 

adjustments. 

3. Press ENTER key to enter the sub menu of 

selected item. 

4.  Move cursor to END at the bottom of the screen 

and press the ENTER to close the setup menu 

and return to normal camera operation mode. 

5. Move cursor to INIT and press ENTER to return all parameters to the factory default 

settings. (Don’t press INIT unless it is necessary) 

6. Move cursor to↑position and press ENTER key for menu position setting.