Oki X400 User Manual - Windows Drivers

printer model that will be used to print the label. Selecting “Printer 

Setup” opens a Printer Driver where the operating parameters of the 

printer can be configured.   

Windows Drivers   

The OKIPOS X400 Windows Drivers lets you print labels using virtually 

any Windows application program. The driver can be installed using the 

Label Gallery Free START.EXE setup wizard or can be loaded like any 

other Windows printer driver using Add Printer from the Windows 

Control Panel. The driver is located in the Drivers directory on the 

CD-ROM. After the driver is installed, you can send data to the OKIPOS 

X400 just like any other printer on your system: simply specify the 

OKIPOS X400 model in the Print dialog box of your Windows 

application..  

Media and Supplies   

The OKIPOS X400 comes from the factory set up to operate with OKI 

media supplies that are shipped with the printer. These supplies have 

been carefully selected to give optimum results with your printer. 

Contact OKI sales for ordering information.Other may or may not give 

acceptable results. It is also probable that you will have to calibrate the 

sensors and heating settings before acceptable results are obtained. 

Calibration is accomplished by using the Windows driver or by selecting 

of the Printer Settings/Advanced/Immediate/Calibrate from the File 

menu. Instructions for calibrating the printer for use with different media 

supplies is contained in the OKIPOS X400 Printer Programming Guide 

found on the OKIPOS X400 series Ready-To-Go CD-ROM.   

24