P1 W1MAX DV-230 Quick Installation Manual - page 2
CONNECTION GUIDE
2
USB Port
1
LAN Port
2
AC Power Port
3
Phone Port
4
1
2
3 4
DV-230 Modem
Window
Communication Towel
3
HOW TO SETUP MY WiMAX CONNECTION
WiMAX Installation Procedure
Step 1: Power Up
Step 2: Establishing WiMAX Connection
Plug the Power Adapter into the AC Outlet and Adapter’s DC tip into
the Device power connector. The P1 Logo will light up.
Once powered on, Modem will establish the WiMAX link by itself. The
followings will occur in order automatically.
DV-230 Modem
AC Power Port
Power Adapter
Wall Socket
Green LED Blinking : Obtaining IP address
Yellow LED Blinking : Connecting to
P1 WiMAX network
Red LED Blinking : Searching for
P1 WiMAX signal
Step 3: DV-230 Modem Positioning
Position and adjust your Modem direction to get the best signal quality.
Note: It is recommended that the Modem is placed near/facing
a window.
Step 4: Computer Connectivity
Connect one end of the LAN cable to your modem LAN port and the
other end to your computer/laptop LAN port.
Once the connection is secured, the LAN Blue LED will light up. The
LED may blink indicating that data is being transferred between
computer/laptop and the modem.
Step 5: Click On Your Internet Browser
You will now be able to connect to the Internet.
DV-230 Modem
LAN Port
LAN Cable
Computer
LED is on:
Weak
LED is on:
Good
LED is on:
Excellent
4
HOW TO SETUP MY W
iMAX CONNECTION