P3 International P4900 Operation Manual - Cleaning and Maintenance
Other manuals for P4900:
Specification Sheet
Manual is about: Robotic Vacuum
of
13
CLEANING AND MAINTENANCE
10
Intake
Cleaning Intake
After repeated use, dust can accumulate around the intake of the P4900
and the working efficiency is therefore diminished. To ensure the best efficiency
and constant air flow, the intake should be cleaned periodically.
1.Turn off the power and place bottom of the smart cleaner upward on a flat
surface such as the floor or a table.
2.Wipe and remove any hair or other matter away from the intake.
1.Rinse the dust bin with tap water. It is not necessary to wash every time.
2.Periodically clean the filter with used toothbrush .
3.Once dry, reinstall the filter and the dust bin lid.
4.Never reinstall the filter wet. If you do, damage may occur. Allow the
filter to dry overnight.