User manual qsm-606ep qsm-612ep qsm-624ep mixer amplifier.
- 2 - panel description 1. Channel 1 volume control 7. Treble control 2. Channel 2 volume control 8. Master volume control – volume control for entire system 3. Channel 3 volume control 9. Power switch 4. Channel 4 volume control 10. Power indicator - led 5. Channel 5 volume control 11. Output level...
- 3 - 9. Mic 5/aux 5 selector switch* 25. Dc power supply terminals 10. Mic 5 input (xlr jack) 26. Mic 5 input (screw terminals) 11. Mic 4 input (xlr jack) 27. Mic 4 input (screw terminals) 12. Mic 4/aux 4 selector switch* 28. Mic 3 input (screw terminals) 13. Aux 4 input (rca jack) 29. Mic 2 input ...
- 4 - tape output connection these standard rca /phono jacks provide a mixed output suitable for connection to a tape or cassette recorder. Pre out / aux out the horseshoe jumper “u” connects the mixer/preamplifier stage to the power amplifier stage. The connecting link must be plugged in for normal...
- 5 - mute slide switch mic 1/aux 1 push switch mic 2/aux 2 push switch mic 3/aux 3 push switch mic 4/aux 4 push switch mic 5/aux 5 push switch ac 115v / 230v voltage selector switch indicators power indicator (led), output level indicators (6 leds) ac power consumption 150w 300w 600w dc power consu...
- 6 - general installation do not run microphone cables near a/c lines, data, telephone or 70v line cables. Do not run outputs line cable near data, telephone or other low voltage cables. Ensure that all loudspeakers are in-phase. Ensure that there are no short circuits on the loudspeaker line befor...
