Pace 56 Solo Manual - page 6
6
Installing your Solo
The very first time:
The very first time you switch on your Solo it will start-up,
test itself and then show the following:
When your Solo switches on
To ensure correct operation of its many features, your Solo
performs a full self-test each time it is switched on. The test
takes just a few seconds, and during this time all five of the
red buttons at the front should glow for a short while
before normal operation begins.
The small light marked is the power indicator and it will
glow continuously whenever your Solo is switched on.
• The
ANS
button will glow.
This indicates that the digital answer phone is switched on and
ready to answer incoming calls. See page 8 for more details
about the Digital Answer Phone feature.
• The
SPEAKER PHONE
button will flash.
This indicates that the call monitoring feature is switched on, so
that you can hear incoming calls on the built-in speaker. See
page 9 for more details about Call Screening Functions.