1. DL manuals
  2. Pacific
  3. Floor Machine
  4. 545411
  5. Parts & Operating Manual

Pacific 545411 Parts & Operating Manual

Summary of 545411

  • Page 1

    Please read this book this operator’s book has important information for the use and safe operation of this machine. Read this book carefully before starting the machine. Keep this book and tell all operators to read the book. If you do not follow the instructions, you can cause an injury or damage ...

  • Page 2

    Important safety instructions to ensure the safe operation of this machine, you must read and understand all warnings and instructions in this book. If you do not un- derstand, ask your supervisor. Warning: do not use the machine without reading the instruction sheet. Warning: to reduce the risk of ...

  • Page 3: Grounding Instructions

    Grounding instructions this machine must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This machine is equipped with a cord having an equipment-grounding conductor and grounding plug. The ...

  • Page 4: Operating Procedures

    Warning! For the safe operation of this machine follow the instructions given in this manual and the training given by your supervisor. Failure to do so can result in personal injury and/or damage to machine and property! Do not operate machine in an explosive environment! Do not operate this machin...

  • Page 5: Procédures D’Exploitation

    Attention! Pour la sécurité de fonctionnement de cette machine suivre les instructions données dans ce manuel et la formation donnée par votre superviseur. Ne pas le faire peut entraîner des blessures et / ou des dommages à la machine et à la propriété! Ne pas utiliser la machine dans un environneme...

  • Page 6: Operating Procedures

    Operation plug the machine’s power cable into a properly grounded outlet (see safety instructions). Next, adjust the handle height to a comfortable position by pulling up on the handle adjustment lever as shown below. The machine may be operated with the handle in the upright position if it is comfo...

  • Page 7: Operating Procedures

    Maintenance prior to use: check power cord for any damage. Do not operate the machine if the cord has nicks, cuts or damage. Check the vacuum hose and connections for the dust control option (if equipped). Check pad grip face for signs of wear or pieces of debris. Replace as needed. After each use: ...

  • Page 8: Transport of Machine

    To transport the orbital floor machine, please be sure to follow the procedure shown below to avoid damage to the machine, property or injury. 1. Be sure that the machine is unplugged from a power source and the cord is wrapped on the handle as shown below. 2. Always leave a pad on the pad grip face...

  • Page 9: Transport De Machine

    Pour transporter la machine de plancher orbitaire, s’il vous plaît assurez-vous de suivre la procédure indiquée ci-dessous pour éviter d’endommager la machine, matériels ou des blessures. 1. Assurez-vous que la machine est débranché d’une source d’alimentation et le cordon est enroulé sur la poignée...

  • Page 10

    Application details for pad/brush use for best cleaning results, use the appropriate pad/brush for your cleaning application. If you need help sourcing the ap- propriate pads/brushes for your application, please contact your sales representative or if this is unknown, contact your supervisor. Pad/br...

  • Page 11

    11 fm-20orb & fm-28orb floor machines - wiring diagram maintenance schedule for service maintenance daily weekly annually check power cord for damage. Do not operate unit if damage is found x check grip face of pad driver to inspect for wear or debris. Replace if needed x if equipped with dust contr...

  • Page 12: Troubleshooting Guide

    Troubleshooting guide issue potential cause proposed solution machine will not start no electrical connection check to make sure that machine is plugged into an outlet safety switch may not be pressed in allowing start up of machine read operating instructions on pages 6 & 7 to en- sure proper steps...

  • Page 13

    13 fm-20orb fl oor ma chine - b ase assembl y.

  • Page 14

    14 fm-28orb fl oor ma chine - b ase assembl y.

  • Page 15

    15 fm-20orb fl oor ma chine - pla te assembl y.

  • Page 16

    16 fm-28orb fl oor ma chine - pla te assembl y.

  • Page 17

    17 fm-20orb & fm-28orb - handle assembl y.

  • Page 18

    18 fm-20orb fl oor ma chine - weight assembl y (op tional).

  • Page 19

    19 fm-28orb fl oor ma chine - weight assembl y (op tional).

  • Page 20

    20 fm-20orb & fm-28orb fl oor ma chine s - dus t c ontr ol assembl y (op tional).

  • Page 21

    21 fm-20orb & fm-28orb fl oor ma chine s - v acuum (op tional dus t c ontr ol kit).

  • Page 22

    22 fm-20orb & fm-28orb fl oor ma chine s - sol ution t ank assembl y (op tional).

  • Page 23

    Warranty policy floor machines, fm-20orb & fm-28orb the pacific floorcare fm-20orb & fm-28orb floor machines have been manufactured, tested and inspected in accordance with specific engineering requirements and are warranted to be free from defects in workmanship and materials as follows: three (3) ...