Pacific PR830AS Use, Care & Installation Manual - page 9
6.
6.
VI. Installation Air outlet
By default the PR830/836AS is pre-configured for 6" round vertical ducting.
1. Using a Philips-head screwdriver remove
the screws and 6" round vertical transition
adapter from top of hood body.
2.Replace 6" round vertical transition
adapter with rectangular transition adapter.
Do not secure to hood body yet.
3. Place 3-1/4"x10" rectangular collar on
top of rectangular transition adapter.
Secure rectangular adapter and rectangular
collar to hood body using the previously
removed screws from step 1.
3-1/4"x10" Rectangular Vertical Ducting
1. Using a Philips-head screwdriver remove
the screws and 6" round vertical transition
adapter from the top of the hood.
3-1/4"x10" Rectangular Horizontal Ducting
六.安裝出風口
在預裝情況下 PR830/836AS 安裝6"圓型排風管接頭。
1. 使用十字螺絲起子,移除機體上方的螺
絲和 6"圓型排風管接頭
。
1. 使用十字螺絲起子,移除機體上方的螺絲
和 6"圓型排風管接頭
。
2. 使用一字型螺絲起子或斜口鉗沿著方型輪廓
線將機體後方的3-1/4"x10"方型金屬蓋移除。
3. 將3-1/4"x10"方型風管圈安裝於 6"圓型轉
方型排風管接頭上方
。
使用步驟1移除螺絲,將風管圈和排風管
接頭鎖固於機體上
。
2. 更換 6"圓型轉方型排風管接頭,且先不
固定於機體上
。
上方排風:
安裝3-1/4"x10"方型風管圈。
後方排風:
安裝3-1/4"x10"方型風管圈。
2. Using a flat head screwdriver or diagonal
cutter, remove 3-1/4"x10" rectangular knock
-out cover plate from back of hood.