Pacific Proteus 210E Operating & Maintenance Instructions - Daily Machine Maintenance
Page 9 of 14
DAILY MACHINE MAINTENANCE
After finishing work and before any type of
maintenance is done, it is necessary to do the
following:
1) Close the water valve with lever (1).
2) Raise the brush base with the foot pedal.
3) Lift the squeegee with lever (2). Note: The
squeegee blades can be damaged if the
squeegee is not raised during storage or
transport.
4) Turn off the brush switch (3).
5) Turn off the vacuum motor switch (4).
6) Disconnect the machine's power cord from the
electrical outlet.
7) Inspect the power cord and plug for nicks, cuts
and any other damage.
Report any damage
to your service manger for repair.
8) Clean the power cord with rag. Make sure
there is no water or
dirt on the power cord.
9) Pull out the power cord a small distance and
then release it. The power cord will retract
automatically.